Nanofabrication: conventional and nonconventional methods

Nanofabrication is playing an ever increasing role in science and technology on the nanometer scale and will soon allow us to build systems of the same complexity as found in nature. Conventional methods that emerged from microelectronics are now used for the fabrication of structures for integrated circuits, microelectro-mechanical systems, microoptics and microanalytical devices. Nonconventional or alternative approaches have changed the way we pattern very fine structures and have brought about a new appreciation of simple and low-cost techniques. We present an overview of some of these methods, paying particular attention to those which enable large-scale production of lithographic patterns. We preface the review with a brief primer on lithography and pattern transfer concepts. After reviewing the various patterning techniques, we discuss some recent application issues in the fields of microelectronics, optoelectronics, magnetism as well as in biology and biochemistry.     

Strain fields at contacts between small particles

Stress fields between interacting small particles ( approximately 100 nm) have been investigated by transmission electron microscopy. The background for these TEM observations is discussed in terms of adhesion stress fields (due to surface forces), the action of an applied point force, possibly magnetic, and dislocations or misfit strains due to an unfavorable matching of crystal lattices at the grain boundary. A further explanation might be sought along the line "squeezed-in oxide" which can be visualized as a coherent particle or a dislocation loop. Accompanying theoretical calculations have been performed and compared with the experimental results.     

Evaluation of a retention model in comprehensive two-dimensional gas chromatography

Modeling the retention in comprehensive two-dimensional gas chromatography (GC x GC) was achieved using retention indices obtained in conventional GC. Predicted results were compared with experimental data obtained in the two-dimensional separation of a synthetic hydrocarbon mixture. This proved to be helpful in optimizing the operating conditions of GC x GC separation of a complex petroleum sample and in identifying chemical families.     

Machine scheme of additive calculation of physicochemical properties of paraffin hydrocarbons

Summary A machine scheme has been developed for the additive calculation of the physicochemical properties of alkanes necessary for mass calculation of the constants and as a supplementation to the automatic chemical information retrieval system.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya No. 11, pp. 1985–1988, November, 1964     

Deprotonation-electrophile trapping of terminal epoxides

Organolithium-induced deprotonation of terminal epoxides in the presence of appropriate diamine ligands allows trapping with a range of electrophiles, yielding functionalised di- and tri-substituted epoxides in good yields and with control of stereochemistry at the epoxide.     

A Robust and Efficient Method for the Computation of Equilibrium Composition in Gaseous Mixtures

This paper presents in detail a robust, efficient and accurate methodology for the computation of equilibrium composition in gaseous mixtures. The methodology is founded on the concept of the chemical basis, which is defined and formalized using a powerful matricial approach. The method is specially designed to be general, thus providing basic thermodynamic data in several areas, such as combustion, plasma chemistry and, more generally speaking, computational fluid dynamics. The performance of the method is given in terms of CPU usage and the computed results are compared with those in the published literature. The method is shown to yield results of very high quality in terms of accuracy and smoothness.     

Effects of structural factors on the pi-dimerization and/or disproportionation of the cation radical of extended TTF containing thiophene-based pi-conjugated spacers

The electrochemical and chemical oxidation of extended TTF 4 and 5 are analysed by cyclic voltammetry, Visible/NIR and ESR spectroscopies, and the X-ray structures of the new salts 5 x BF(4)(CH(2)Cl(2)) and 4 x ClO(4)(THF)(1/2) are presented. The effects of structural factors on the pi-dimerization or the disproportionation reaction of the cation radical are shown. The oxidation of compound 4 presents the successive formation of stable cation radical and dication species both in dichloromethane (DCM) and in a CH(3)CN/THF mixture. In contrast, for compound 5, the stability of the oxidation states strongly depends on the nature of the solvent. In DCM, the oxidation of 5 proceeds by two close one-electron transfers while in CH(3)CN/THF the dication is directly formed via a two-electron process. The X-ray structures of the two salts reveal the formation of pi-dimers of cation radical. While the dimer (5(2))(2+) is due mainly to pi-pi interactions between the conjugating spacer, the multiplication of the sulfur atoms in compound 4 contributes to stabilize the dimer by the combined effects of S-S and pi-pi interactions. Visible/NIR and ESR experiments confirm the higher tendency of 4(+)(.) to dimerize with the occurrence of dimer and monomer in solution, while for 5(+)(.) only the monomer is detected in DCM. On the other hand, by dissolution of 5 x BF(4)(CH(2)Cl(2)) in CH(3)CN, only the neutral and the dicationic states of compounds 5 are observed owing to the disproportionation reaction.     

Controlling the quality of testing

 This article mainly focuses on the testing of products, materials, etc., but the general principles are applicable in a broader perspective. Quality of testing should be judged based on fitness for purpose. This judgement includes both objective and subjective elements. The possibility to make decisions and other professional judgements based on test results alone is discussed and compared with the decisions and judgements being made through the certification and inspection process. Quality, including the uncertainty of the test results, depends on many factors, and in order to make necessary improvements in the testing procedures based on the customers' needs, the right issues should be addressed. The question arises as to whether, in laboratories' quality systems and in the accreditation and certification process, attention is really paid to those factors that are crucial to obtaining reliable results.     

Chromatographie par complexe de transfert de charge. Application à l'analyse d'hydroliquéfiats du charbon par HPLC

Résumé L'analyse de coupes lourdes (huile de distillation sous vide et huile issue du séparateur à chaud) provenant de l'hydroliquéfaction catalytique du charbon a été réalisée par mise en ouvre de différentes techniques chromatographiques. L'identification des principales structures résulte de l'application de la chromatographie par couplage de transfert de charge en mode HPLC et des spectroscopies UV et de masse.

---

Donotor-acceptor complex chromatography —Application to analysis of coal liquefaction products by HPLC

Summary A Vacuum gas oil and the corresponding residue of a coal liquefaction product were investigated by means of HPLC and MS. Nearly a complete identification was performed by chromatographic, UV-spectroscopic methods and MS.

     

Studying lateral diffusion in lipid bilayers by combining a magic angle spinning NMR probe with a microimaging gradient system

An alternative technique for studying the lateral diffusion in lipid membranes using pulsed field gradients in combination with magic angle spinning is presented. It is shown that MAS probes inserted in a microimaging device that produce high field gradients can be used to monitor also slow diffusion processes. As an example, measurements of the lateral diffusion of lipids embedded in the bilayer of a cubic phase are presented.