Development of a rapid and specific assay for detection of busulfan in human plasma by high-performance liquid chromatography/electrospray ionization tandem mass spectrometry

A sensitive and specific assay for detection of busulfan in human plasma was developed. The assay is based on rapid isolation of busulfan by liquid-liquid extraction with ethyl acetate, and detection by high-performance liquid chromatography with electrospray ionization and tandem mass spectrometry. 1,6-Bis(methanesulfonyloxy)hexane, a synthesized analogue of busulfan, was used as the internal standard (IS). The acquisition was performed in the multiple reaction monitoring mode; busulfan and the IS were detected with no interferences from plasma matrix. The method was linear over the range 5-2500 ng mL(-1), with r2 > 0.99 and a run time of only 3.5 min. The intra- and inter-assay precisions were in the ranges 2.1-11.9% and 3.2-10.1%, respectively, and the intra- and inter-assay accuracies were 92.2-107.6% and 94.7-104.1%, respectively. The absolute recoveries were 82.0% (20 ng mL(-1)), 90.6% (1000 ng mL(-1)) and 80.0% (2000 ng mL(-1)) for busulfan, and 89.1% for the IS (1000 ng mL(-1)). The limits of detection and quantification were 2 and 5 ng mL(-1), respectively. The validated method was successfully applied to analyze plasma samples obtained from six adults receiving doses of 1 mg kg(-1) in a conditioning regimen prior to bone marrow transplantation. A marked intra-patient variation in busulfan concentrations during the steady state was observed, which limits the application of pharmacokinetic modeling and suggests that continuous therapeutic monitoring is necessary for adequate individualized dosing. In this regard, the present assay brings important advantages relative to other methods described in the literature, i.e., it is highly specific and simple to perform, with a rapid chromatographic run time (3.5 min), and the whole procedure can be completed in 4-5 h, which would permit dose corrections after the third dose allowing earlier and better dosing adjustments towards the target level of busulfan.     

Molecular dynamics in thin (grafted) polymer layers

Broadband dielectric spectroscopy is employed to study the molecular dynamics in thin polymer layers of (spin-coated) cis-1, 4-polyisoprene (PI) and of (grafted and spin-coated) polydimethylsiloxane (PDMS). For the former, besides the segmental and the normal mode relaxation, a confinement-induced mode is observed, which is assigned to fluctuations of terminal subchains. It turns out that the uptake of water has a strong influence on the dynamics of this relaxation, which takes place in the immediate vicinity of the interface. Between grafted and spin-coated PDMS a pronounced difference in the dynamics is observed for layers that are comparable in thickness to the radius of gyration of the confined chain. This is attributed to the different conformation of grafted and spin-coated polymer layers.     

Nucleic acid analysis using an expanded genetic alphabet to quench fluorescence

Organic chemistry has made possible the synthesis of molecules that expand on Nature's genetic alphabet. Using the previously described nonstandard DNA base pair constructed from isoguanine and 5-methylisocytosine, we report a highly specific and sensitive method that allows for the fast and specific quantitation of genetic sequences in a closed tube format. During PCR amplification, enzymatic site-specific incorporation of a quencher covalently linked to isoguanine allows for the simultaneous detection and identification of multiple targets. The specificity of method is then established by analysis of thermal denaturation or melting of the amplicons. The appropriate functions of all reactions are further verified by incorporation of an independent target into the reaction mixture. We report that the method is sensitive down to the single copy level, and specificity is demonstrated by multiplexed end-point genotypic analysis of four targets simultaneously using four separate fluorescent reporters. The method is general enough for quantitative and qualitative analysis of both RNA and DNA using previously developed primer sets. Though the method described employs the commonly used PCR, the enzymatic incorporation of reporter groups into DNA site-specifically should find broad utility throughout molecular biology.     

Intrinsic and extrinsic factors in anion electron-stimulated desorption: D- from deuterated hydrocarbons condensed on Kr and water ice films

The results of D(-) ion desorption induced by 3-20 eV electrons incident on condensed CD(4), C(2)D(6), C(3)D(8), C(2)D(4), and C(2)D(2) are presented. These compounds were deposited in submonolayer amounts on the surfaces of multilayer solid films of Kr and nonporous and porous amorphous ice. While desorption of the D(-) anions proceeds via well-known processes, i.e., dissociative electron attachment (DEA) and dipolar dissociation, significant perturbations of these processes due to presence of the different film substrates are observed. We have shown that it is possible to distinguish between the character and nature of these perturbations. The presence of the nonporous ice perturbs the D(-) desorption intensity by affecting the intrinsic properties of the intermediate anion states through which dissociation proceeds. On the other hand, the presence of the porous ice introduces extrinsic effects, which can affect electron energy losses prior to their interaction with the hydrocarbon molecule and/or the energies and intensities of the fragment species after dissociation. Simple mechanisms responsible for the observed variations in the intensities of desorbed anionic signals are proposed and discussed. Electron transfer from transient anion states to electron states of the substrate film or nearby hydrocarbon molecules appear as the most efficient mechanism to reduce the magnitude of the DEA process.     

Fluoroaliphatic esters of fluorosulfonic acid. 6. Interaction of fluorine-containing α,β-bis-fluorosulfatocarbonyl compounds with nucleophilic reagents

Fluorine-containing ,-fluorosulfatocarbonyl compounds interact with halides of alkali metals with the formation of -halogeno--dicarbonyl derivatives.A. N. Nesmeyanov Institute of Heteroorganic Compounds, Russian Academy of Sciences, 177813 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 3, pp. 715–719, March, 1992.     

Comparison of the acidity of residual silanol groups in several liquid chromatography columns

The silanol acidity of Waters Resolve C18, Waters Resolve silica, Waters Symmetry C18, Waters Symmetry silica, Waters XTerra MS C18 and underivatized XTerra columns has been measured from the retention of LiNO3 with a methanol/water (60:40) mobile phase buffered to different pH values. The Li+ cation is retained by cationic exchange with the background cation of the mobile phase (Na+) through the ionized silanols. The number of active silanols increases in the order: XTerra MS C18 < Symmetry C18 < underivatized XTerra < Resolve C18 < Resolve silica approximately equal to Symmetry silica. XTerra MS C18 does not present any residual silanol acidity up to s(s)pH 10.0 (pH in 60% methanol) as measured by LiNO3. The underivatized XTerra packing and Symmetry C18 present active silanols only at s(s)pH values higher than 7.0. For the other three columns, two different types of silanols with different acidity (s(s)pKa values about 3.5-4.6 and 6.2-6.8, respectively) have been observed. Symmetry C18 shows evidence of the presence of active basic sites that retain NO3- by anionic exchange.     

Liquid-vapor interface of square-well fluids of variable interaction range

Properties of the liquid-vapor interface of square-well fluids with ranges of interaction lambda=1.5, 2.0, and 3.0 are obtained by Monte Carlo simulations and from square-gradient theories that combine the Carnahan-Starling equation of state for hard spheres with the second and third virial coefficients. The predicted surface tensions show good agreement with the simulation results for lambda=2 and for lambda=3 in a temperature range reasonably close to the critical point, 0.8相似文献   

From allylic alcohols to aldols by using iron carbonyls as catalysts: computational study on a novel tandem isomerization-aldolization reaction

The tandem isomerization-aldolization reaction between allyl alcohol and formaldehyde mediated by [Fe(CO)3] was studied with the density functional B3LYP method. Starting from the key [(enol)Fe(CO)3] complex, several reaction paths for the reaction with formaldehyde were explored. The results show that the most favorable reaction path involves first an enol/allyl alcohol ligand-exchange process followed by direct condensation of formaldehyde with the free enol. During this process, formation of the new C-C bond takes place simultaneously with a proton transfer between the enol and the aldehyde. Therefore, the role of [Fe(CO)3] is to catalyze the allyl alcohol to enol isomerization affording the free enol, which adds to the aldehyde in a carbonyl-ene type reaction. Similar results were obtained for the reaction between allyl alcohol and acetaldehyde.     

Synthesis and Spectroscopic Characterization of New Lead(II) Thiosaccharinates. Molecular Structure of Bis(thiosaccharinato)tetrakis(pyridine)dilead(II) and Thiosaccharinato‐bis(1,10‐phenantroline)lead(II) Thiosaccharinate

Four new lead(II) thiosaccharinate complexes: [Pb(tsac)₂H₂O] (1) (tsac: thiosaccharinate anion), [Pb₂(tsac)₄(py)₄] (2) (py: pyridine), [Pb(tsac)(o‐phen)₂](tsac)·CH₃CN (3) (o‐phen: 1,10‐phenantroline), and [Pb(tsac)₂(bipy)] (4) (bipy: 2,2′‐bipyridine) were prepared. The infrared and electronic spectra as well as the thermal analysis of all the compounds were recorded and discussed. The thiosaccharinate anion acts in three different coordination forms, one of then reported for the first time. The crystal structures of complexes 2 and 3 have been determined by single crystal X‐ray diffractometry. In complex 2 , two monomeric moieties are joined together forming a symmetric bis‐μ‐sulphur bridged dimer by interaction of two lead(II) atoms through the exocyclic sulphur atoms of two thiosaccharinate ligands. The seven‐fold coordination sphere of each lead atom is completed by two pyridine nitrogen atoms and by another sulfur and two nitrogen atoms of the thiosaccharinate anions. In complex 3 , the lead(II) atom is coordinated by four nitrogen atoms of two 1,10‐phenantroline molecules and by the sulfur and nitrogen atoms of one thiosaccharinate ion. The second anion has an electrostatic interaction with the nucleus.