Three-dimensional dynamic Green’s functions in transversely isotropic tri-materials

An analytical derivation of the elastodynamic fundamental solutions for a transversely isotropic tri-material full-space is presented by means of a complete representation using two displacement potentials. The complete set of three-dimensional point-load, patch-load, and ring-load Green’s functions for stresses and displacements are given, for the first time, in the complex-plane line-integral representations. The formulation includes a complete set of transformed stress-potential and displacement-potential relations in the framework of Fourier expansions and Hankel integral transforms, that is useful in a variety of elastodynamic as well as elastostatic problems. For the numerical computation of the integrals, a robust and effective methodology is laid out. Selected numerical results for point-load and patch-load Green’s functions are presented to portray the dependence of the response on layering, the frequency of excitation, and type of loading.     

A new multiobjective allocator of capacitor banks and distributed generations using a new investigated differential evolution

This article has investigated a new multiobjective allocation of optimal sizing and sitting of distributed generation (DG) units and capacitor banks in simultaneous mode to improve reliability and reduce energy losses. The proposed method consists of four objectives, that is, cost of energy not supplied, system average interruption duration index, costs of energy loss and investment. A novel structure differential evolution has been suggested to solve this nonlinear complex problem and its results are compared with related values of genetic algorithm and simple differential evolutionary algorithm. In addition to the novel objective function, the other contribution of this article is proposing a new model for load and energy cost. Three types of DGs, that is, wind turbine, solar cell, and diesel generator have been used in placement process. To verify the comprehensiveness of the proposed function, three scenarios have been introduced: scenario i: first, placement of DGs, then capacitor banks, scenario ii: first, placement of capacitor banks, and then DGs, and scenario iii: simultaneous placement of DGs and capacitor banks. Simulations have been carried out on one part of practical distribution network in Metropolitan Tabriz in North West of Iran. The results of simulations have been discussed and analyzed using the five novel indices. The obtained simulation results using proposed function shows that the simultaneous placement of DGs and capacitor banks results in more reduction of the energy losses and increase improvements of reliability indices as well as voltage profile. © 2013 Wiley Periodicals, Inc. Complexity 19: 40–54, 2014     

Using a Natural Surfactant for Synthesize of NiO and CuO Nanostructures via Simple and Fast Microwave Approach

NiO and CuO nanostructures were synthesized successfully via simple and fast microwave approach. Olive oil was chose as surfactant for stabilizing nanostructures. Different parameters such as microwave time and power and olive oil concentration were investigated on product size and morphology. The products were characterized with X-ray diffraction pattern, scanning electron microscopy, transmission electron microscopy and energy dispersive spectrometry analysis.     

A sensitive and simple extractive-spectrophotometric method for the determination of microgram amount of cobalt by using alpha-benzilmonoxime.

Alpha-benzilmonoxime has been used for the extraction and determination of cobalt at microgram amount. The reagent reacts with cobalt(II) in the pH range of 8.8 - 9.3 to form a yellow-color chelate, which is extracted in chloroform, toluene, and some other non-polar solvents. The chelate is stable in chloroform for about one day. Under the optimum conditions of the a-benzilmonoxime concentration and pH of 9.0, Beer's law was obeyed in the concentration range of 0.08 - 2.2 microg/ml cobalt. The molar absorptivity of the extracted species was 2.55 x 10(4) dm3/mol cm at 380 nm, with a detection limit of 0.01 microg/ml cobalt. Relative standard deviations of 0.4, 0.8 and 2.3% were found for the determination of cobalt concentrations of 2.2, 1.1 and 0.08 microg/ml, respectively. The effect of diverse ions on the determination of 1.00 microg/ml of cobalt has been studied. The method was applied to the determination of cobalt in vitamin B12 and B-complex ampoules, a Co2O3-Co3O4 laboratory chemical mixture and some synthetic alloy samples. The method is sensitive, simple, rapid and accurate.     

A fast Pareto genetic algorithm approach for solving expensive multiobjective optimization problems

We present a new multiobjective evolutionary algorithm (MOEA), called fast Pareto genetic algorithm (FastPGA), for the simultaneous optimization of multiple objectives where each solution evaluation is computationally- and/or financially-expensive. This is often the case when there are time or resource constraints involved in finding a solution. FastPGA utilizes a new ranking strategy that utilizes more information about Pareto dominance among solutions and niching relations. New genetic operators are employed to enhance the proposed algorithm’s performance in terms of convergence behavior and computational effort as rapid convergence is of utmost concern and highly desired when solving expensive multiobjective optimization problems (MOPs). Computational results for a number of test problems indicate that FastPGA is a promising approach. FastPGA yields similar performance to that of the improved nondominated sorting genetic algorithm (NSGA-II), a widely-accepted benchmark in the MOEA research community. However, FastPGA outperforms NSGA-II when only a small number of solution evaluations are permitted, as would be the case when solving expensive MOPs.     

A convenient synthesis of 5‐alkylthio‐3,4‐diarylisoxazoles by palladium‐catalyzed coupling reactions

Palladium‐catalyzed coupling reaction was found effective for rapid access to pharmacologically interesting 3,4‐diarylisoxazoles derivatives as selective COX‐2 inhibitors. Thus, the coupling reaction between 5‐alkylthio‐3‐aryl‐4‐iodoisoxazoles and arylboronic acids afforded the target 5‐alkylthio‐3,4‐diarylisoxazoles in good yields.     

Three-dimensional dynamic Green’s functions for a multilayered transversely isotropic half-space

With the aid of a method of displacement potentials, an efficient and accurate analytical derivation of the three-dimensional dynamic Green’s functions for a transversely isotropic multilayered half-space is presented. Constituted by proper algebraic factorizations, a set of generalized transmission–reflection matrices and internal source fields that are free of any numerically unstable exponential terms are proposed for effective computations of the potential solution. Three-dimensional point-load Green’s functions for stresses and displacements are given, for the first time, in the complex-plane line-integral representations. The present formulations and solutions are analytically in exact agreement with the existing solutions given by Pak and Guzina (2002) for the isotropic case. For the numerical computation of the integrals, a robust and effective methodology which gives the necessary account of the presence of singularities including branch points and poles on the path of integration is laid out. A comparison with the existing numerical solutions for multilayered isotropic half-space is made to confirm the accuracy of the numerical solutions.     

Two‐dimensional modeling for stability analysis of two‐phase stratified flow

The effect of wavelength and relative velocity on the disturbed interface of two‐phase stratified regime is modeled and discussed. To analyze the stability, a small perturbation is imposed on the interface. Growth or decline of the disturbed wave, relative velocity, and surface tension with respect to time will be discussed numerically. Newly developed scheme applied to a two‐dimensional flow field and the governing Navier–Stokes equations in laminar regime are solved. Finite volume method together with non‐staggered curvilinear grid is a very effective approach to capture interface shape with time. Because of the interface shape, for any time advancement, a new grid is performed separately on each stratified field, liquid, and gas regime. The results are compared with the analytical characteristics method and one‐dimensional modeling. This comparison shows that solving the momentum equation including viscosity term leads to physically more realistic results. In addition, the newly developed method is capable of predicting two‐phase stratified flow behavior more precisely than one‐dimensional modeling. It was perceived that the surface tension has an inevitable role in dissipation of interface instability and convergence of the two‐phase flow model. Copyright © 2009 John Wiley & Sons, Ltd.     

Ultrasonic assisted synthesis of imidazo[1,2-a]azine catalyzed by ZnO nanorods

ZnO nanorods have been successfully used as an efficient, economic, and reusable catalyst for the synthesis of imidazo[1,2-a]azine under ultrasonic irradiation. This procedure offers advantages in terms of higher yields, short reaction times and mild reaction conditions.