Novel nanocomposite membranes prepared with PVC/ABS and silica nanoparticles for C<Subscript>2</Subscript>H<Subscript>6</Subscript>/CH<Subscript>4</Subscript> separation

Composite membranes based on polyvinyl chloride and acrylonitrile butadiene styrene (ABS) copolymer have been prepared and then filled with 2–8 wt % of silica nanoparticles. Membranes were fabricated by solution casting method using dimethylacetamide. The performance of prepared membranes were studied for methane and ethane at the feed pressure of 1.0, 1.5, 2.0, and 3.0 bar at 35°C. By increasing the percentage of ABS, permeability of methane and ethane increased. In addition, by adding the silica nanoparticles in the membrane, permeability of gas increased in all cases. The highest gas pair selectivity for C₂H₆/CH₄ could be obtained from PVC/BS (20 wt %) which loaded with 8 wt % of silica nanoparticles. The results of this study suggest that high performance gas separation nanocomposite membranes can be attained by adopting a judicious combination of blending technique for polymeric membrane, optimized loading percentage, and feed operating conditions.     

Response surface optimization of heterogeneous Fenton-like degradation of sulfasalazine using Fe-impregnated clinoptilolite nanorods prepared by Ar-plasma

Research on Chemical Intermediates - Optimization of sulfasalazine degradation using the heterogeneous Fenton-like process in batch mode was investigated by response surface methodology. The...     

Synthesis, characterization, mechanochromism and photochromism of [Fe(dm4bt)3][FeCl4]2 and [Fe(dm4bt)3][FeBr4]2, along with the investigation of steric influence on spin state

The complexes [Fe(dm4bt)(3)][FeCl(4)](2) (1) and [Fe(dm4bt)(3)][FeBr(4)](2) (2) were prepared from the reaction of 2,2'-dimethyl-4,4'-bithiazole (dm4bt) with FeCl(3)·6H(2)O and FeBr(3), respectively, in methanol. Both complexes were characterized by IR, UV-Vis and (1)H NMR spectroscopy and their structures were studied by single-crystal diffraction. The methylated bithiazole led to high spin Fe(II) centers in the octahedral cation part of complexes 1 and 2 with Fe-N distance of 2.220 ?, in spite of the low spin octahedral Fe(II) complexes with unsubstituted bithiazole ligands. Crystal structure determination of 2 was performed at 90, 120 and 298 K. Temperature reduction to 90 K resulted in a decrease in the Fe-N bond length to 2.206 ? which is still in the range of high spin Fe(II). Complex 1 shows a reversible mechanochromic effect from the crystalline phase to powder form from red to yellow; it also displays reversible photochromism from yellow to green in solution under sunlight. The magnetic behaviour of the complexes was also studied at 2-300 K. The temperature dependence of χ(m)T curves for the two forms of 1, crystal and powder, demands some changes in their magnetic behavior, causing different colors i.e. red and yellow. At low temperatures, χ(m)T decreases where the decrease starts at around 65 K for compound 1, and at around 100 K for compound 2, due to different counterions. The two complexes exhibit antiferromagnetism at around 4 K.     

Surface properties of nano-Al2O3 film and its application in the preparation of morphine electrochemical sensor

In this study, alumina nanoparticles and film were synthesized by sol–gel method and thermally grown. The chemical composition, morphology, and structural properties of the grain nanostructures of the nanoaggregate aluminum atoms on the silicon surface are characterized by X-ray diffraction, energy dispersive spectroscopy, and scanning electron microscopy techniques which show that the atomic ratio of Al and O elements is about 60:45 and the mass ratio is about 70:31. This point reveals that there is no intermediate layer between Al₂O₃ and the silicon substrate. In conclusion, this nanoparticle shows good electron conductivity at the surface of a carbon paste electrode that shows its ability in the preparation of a nanosensor in morphine analysis. The linear response range and detection limit were found to be 0.1–550 and 0.03 μmol L^?1, respectively. The proposed sensor was successfully applied for the determination of morphine in real samples such as human urine and drug.     

The complexity of generating an exponentially distributed variate

We analyze in detail an almost optimal algorithm for generating an exponentially distributed variate. The algorithm is due to Knuth and Yao and relies on a method which goes back to J. von Neumann. It is shown here that it can generate k bits of an exponentially distributed variate using an average of about k + 5.67974692 coin flippings. This solves a problem left open by Knuth and Yao.     

Property (X) for Second-Order Nonlinear Differential Equations of Generalized Euler Type

In this paper the generalized nonlinear Euler differential equation t²k(tu′)u″ + t(f(u)+ k(tu′))u′ + g(u) = 0 is considered. Here the functions f(u), g(u) and k(u) satisfy smoothness conditions which guarantee the uniqueness of solutions of initial value problems, however, no conditions of sub(super) linearity are assumed. We present some necessary and sufficient conditions and some tests for the equivalent planar system to have or fail to have property (X⁺), which is very important for the existence of periodic solutions and oscillation theory.     

Synthesis,Characterization, and Crystal Structure of a Chromium(III)‐Complex Containing 2,6‐Pyridinedicarboxylic Acid and 1,10‐Phenanthroline

The reaction of solution 2,6‐pyridinedicarboxylic acid and 1,10‐phenanthroline ( 1 ) with CrCl₃·6H₂O led to the complex [Cr(phen)(pydc)(H₂O)][Cr(pydc)₂]·4H₂O ( 2 ) (phen is 1,10‐phenanthroline and pydcH₂ is 2,6‐pyridinedicarboxylic acid). 2 was characterized by elemental analysis, IR spectroscopy and single‐crystal structure determination. Crystal data for 2 at ?80 °C: triclinic, space group , a = 818.5(1), b = 1492.2(1), c = 1533.6(2) pm, α = 76.45(1)°, β = 84.22(1)°, γ = 77.99(1)°, Z = 2, R₁ = 0.0416.     

Kinetic spectrophotometric method for the determination of trace amounts of oxalate by an activation effect.

A new, simple and inexpensive kinetic catalytic spectrophotometric method for the determination of oxalate is described. The method is based on an activation effect of oxalate on a catalytic effect of iron(II) on the oxidation of iodide by bromate. The reaction is monitored by measuring the absorbance of triiodide ion at lambda max = 352 nm. A calibration graph was obtained from 0.10 - 7.0 microg cm(-3) of oxalate with a detection limit of 0.080 microg cm(-3). The standard deviations for ten replicate determinations of 0.50, 1.0 and 5.0 microg cm(-3) of oxalate were 4.0, 2.6 and 1.8%, respectively. The applicability of the method was demonstrated by the determination of oxalate ion in real samples.     

Strong Convergence of an Inexact Proximal Point Algorithm in a Banach Space

Journal of Optimization Theory and Applications - By using our own approach, we study the strong convergence of an inexact proximal point algorithm with possible unbounded errors for a maximal...