Physical and Rheological Characteristics of Emulsion Model Structures Containing Iranian Tragacanth Gum and Oleic Acid

The physical and rheological properties of oil in water model emulsion systems containing Iranian tragacanth gum (TG) (0.5, 1 g/100 ml emulsions), whey protein isolate (WPI) (2, 4 g/100 ml emulsions), and oleic acid (5, 10 ml/100 ml emulsions) were investigated for droplet-size distribution, creaming index, and rheological properties of emulsions. The shear-thinning behavior of all dispersions was modeled using power law, Cross, and Ellis models. The power law model described the flow behavior of dispersions for its lowest standard error (0.29) and highest determination coefficient (R²) (0.99). Rheological investigation showed that both loss (G″) and storage (G′) modules increased as gum and oil content increased. Delta degree was 0.1 and increased as frequency increased, indicating that liquid-like viscose behavior dominated solid-like elastic behavior. Droplet-size distribution was measured by light scattering and microscopic observations revealed a flocculated system. Gum, WPI, and oil contents decreased the emulsion creaming index with gum concentration having the greatest effect.     

Contact angle hysteresis in multiphase systems

Contact angle (CA) hysteresis is the difference between the maximum (advancing) and minimum (receding) water CA. Hysteresis is caused by adhesion hysteresis in the solid–water contact area (2D effect) and by pinning of the solid–water–air triple line due to the surface roughness (1D effect). In this work, we show that CA hysteresis is present also in more complex systems, such as an organic liquid (oil) in contact with a solid immersed in water. In order to decouple the 1D and 2D effects, we study CA hysteresis in solid–water–air (droplet), solid–air–water (bubble), solid–water–oil, and solid–water–air–oil systems involving rough and microstructured surfaces. The comparative analysis of these systems allows decoupling the 1D and 2D effects as well as hydrogen bonding and entropic forces (water–air tension) and dispersion forces (oil–air tension).     

Ligandless-ultrasound-assisted emulsification microextraction followed by inductively coupled plasma-optical emission spectrometry for simultaneous determination of heavy metals in water samples

In this study, a simple and efficient method of ligandless-ultrasound-assisted emulsification microextraction (LL-USAEME) followed by inductively coupled plasma-optical emission spectrometry (ICP-OES) has been developed for simultaneous extraction, preconcentration and determination of manganese, cadmium, cobalt and nickel in water samples. In the proposed approach, tetrachloroethylene was selected as extraction solvent. The effect of important experimental factors such as volume of extraction solvent, pH, sonication time, salt concentration, and temperature was investigated by using a fractional factorial design (2^5?1) to identify important factors and their interactions. In the next step, a Box-Behnken design (BBD) was applied for optimisation of significant factors. The obtained optimal conditions were: 30?µL for extraction solvent, 12 for pH, 5?min for sonication time, and 5% w/v for salt concentration. The limits of detections (LODs) for Cd(II), Co(II), Mn(II) and Ni(II) were 0.20, 0.13, 0.21 and 0.28?µg?L^?1, respectively. Relative standard deviations (RSD, C?=?200.0?µg?L^?1, n?=?9) were between 3.4–7.5% and the calibration graphs were linear in the range of 0.25 to 1000.0?µg?L^?1 for Mn, 0.5–1000.0?µg?L^?1 for Co and Ni and 1.0–250.0?µg?L^?1 for Cd. The determination coefficients (R ²) of the calibration curves for the analytes were in the range of 0.993 to 0.999. The proposed method was validated by using two certified reference materials, and also the method was applied successfully for the determination of heavy metals in different real water samples.     

“Grafting through” approach for synthesis of polystyrene/silica aerogel nanocomposites by in situ reversible addition-fragmentation chain transfer polymerization

Aerogel/polystyrene nanocomposites with mixed free and aerogel-attached polystyrene chains were synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization. 3-methacryloxypropyldimethylchlorosilane containing a double bond, which could be incorporated into polystyrene chains by a “grafting through” approach, was used as an aerogel modifier. Kinetics of RAFT polymerization of styrene in the presence of modified silica aerogel was studied by monitoring conversion and molar mass values. To further study, attached polymers were detached and their molecular characteristics were compared to free chains. According to results, the presence of silica aerogel particles has a sensible influence on polymerization kinetic and more aerogels result in decreased polymerization rate and conversion. The dispersity (Ð) of polymer chains increased by the addition of silica aerogel. In the case of aerogel-attached polystyrene chains, number-averaged molar mass values were slightly lower than that of free chains. Also, thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques were used to observe the effect of loading on thermal properties of synthesized nanocomposites.     

Polypyrrole–montmorillonite nanocomposite as sorbent for solid‐phase microextraction of phenolic compounds in water

A fiber‐coated polypyrrole–montmorillonite nanocomposite was prepared for solid‐phase microextraction. The fiber coating can be prepared easily; it is mechanically stable and exhibits relatively high thermal stability. The prepared fiber was evaluated for the extraction of some phenolic compounds from aqueous sample solutions by gas chromatography–mass spectrometry. The effects of the extraction and desorption parameters including extraction time, extraction temperature, stirring rate, ionic strength, pH and desorption temperature and time have been studied. At optimum conditions, the repeatability for one fiber (n = 5), expressed as % relative standard deviation was between 6.5 and 7.8% for the phenolic compounds. The detection limits for the studied phenolic compounds were between 0.05–1.3 ng/mL. The developed method offers the advantage of being simple to use, with shorter analysis time, lower cost, thermal stability of the fibers, and high relative recovery in comparison to conventional methods of analysis.     

Kinetics of mullitization from sol-gel synthesized precursors

The aim of this study is to shed more light on the formation of mullite and the kinetics of mullitization from sol-gel synthesized precursors. Tetraethylorthosilicate (TEOS) and aluminum nitrate nonahydrate (ANN) were used, as a source of silica and alumina, respectively, for the synthesis of homogenous mullite precursor powder. The mullitization process was characterized by thermogravimetry (TG), differential thermal analysis (DTA), thermodilatometric analysis (TDA), and x-ray powder diffraction (XRD) techniques. It was found that mullite started to crystalize at temperatures of 1050, 1200, and 1241 °C as determined by XRD, DTA, and TDA, respectively?. Mullite crystallization kinetics was thoroughly investigated under isothermal and non-isothermal conditions using DTA. The activation energy for mullite formation was calculated, for different crystallization fractions, following the Freidman, Kissinger, Boswell, and Ozawa methods. The average values were found to be 1282.92, 1324.30, 1336.93, and 1283.09 kJ/mol, respectively. The kinetic parameters and the crystallization mechanism were determined and the results were compared with those available in the literature. The Sestak Berggren SB(m,n) model was found to be the most suitable for the determination of mullite crystallization mechanism. The calculated average values of the Gibbs free energy (ΔG^#), enthalpy (ΔH^#), and entropy (ΔS^#) for mullite formation, at different heating rates, were 433.98 kJ/mol, 1294.20 kJ/mol, and 566.23 J/mol.K, respectively.     

Energy and exergy analysis of a novel turbo-compounding system for supercharging and mild hybridization of a gasoline engine

Journal of Thermal Analysis and Calorimetry - Number of hybrid vehicles has increased around the world significantly. Automotive industry is utilizing the hybridization of the powertrain system to...     

Copper-catalyzed domino reaction between terminal alkynes,isocyanates, and oxiranes: An atom-economic route to morpholine derivatives

In situ generated copper acetylides react with isocyanates and oxiranes to form a decent range of morpholine derivatives. The reactions proceeded with acceptable yields and excellent regioselectivity. The presence of oxygen and moisture completely inhibited the reaction. The scope of the reaction is wide and the reactions involve consecutive C–C, C–N, and C–O bond formations.     

Detection of Dexamethasone Sodium Phosphate in Blood Plasma: Application of Hematite in Electrochemical Sensors

We studied sensor application of a graphene oxide and hematite (α‐Fe₂O₃/GO) composite electrode well‐characterized by the SEM and XRD. Through differential pulse voltammetry (DPV), oxidation of dexamethasone sodium phosphate (DSP) was studied at the surface of a glassy carbon electrode (GCE) modified with graphene oxide nanosheets (GO) and the α‐Fe₂O₃/GO composite. The values of the transfer coefficient (α) and the diffusion coefficient (D) of DSP were 0.5961 and 4.71×10^?5 cm² s^?1 respectively. In the linear range of 0.1–50 μM, the detection limit (DL) was 0.076 μM. In the second step, a GCE was modified with α‐Fe₂O₃/GO composite and the DSP measurement step was repeated to analyzed and compare the effects of hematite nanoparticles present on graphene oxide surfaces. According to the results, α and D were 0.52 and 2.406×10^?4 cm² s^?1 respectively and the DL was 0.046 μM in the linear range of 0.1–10.0 μM. The sensor is simple, inexpensive and uses blood serum.     

Influence of counter-anion on the coordination geometry of manganese(II) complexes with methyl-2-pyrazinecarboximidate ligand

Two new complexes of [Mn(2-MPyzCI)₂Cl₂].H²O (1) and [Mn(2-MPyzCI)₂(H₂O)₂](NO₃)₂ (2) were synthesized from the reaction of MnX₂.4H₂O (X=Cl^? and NO₃^?) with 2-cyanopyrazine in methanolic solution. The chelating methyl pyrazine-2-carboximidate (2-MPyzCI) ligand is formed via the methanolysis of 2-cyanopyrazine. Although coordination environment around manganes(II) ions is similar, but these complexes are different in geometrical position of 2-MPyzCI ligands. As both compounds are synthesized under the same reaction conditions, the only difference between these two complexes are counter ions and changing of geometrical position of ligands can be considered as a result of influence of the counter-anions on the molecular structures.