甲烷氧化偶联锂/氧化镁催化剂和纳米催化剂

采用初湿浸渍和溶胶凝胶法分别制备了Li/MgO催化剂和Li/MgO纳米催化剂. 比较两种Li/MgO催化剂对于甲烷氧化偶联反应的催化性能. 采用X射线衍射、BET吸附和透射电镜进行了表征.在973-1073 K和总压力为101 kPa下对催化剂进行了测试. 实验结果表明,Li/MgO纳米催化剂比普通催化剂对于甲烷氧化偶联反应表现为更高的甲烷转换率,较高选择性和较高的的主要产品(乙烷和乙烯)的产率.     

Physical and Rheological Characteristics of Emulsion Model Structures Containing Iranian Tragacanth Gum and Oleic Acid

The physical and rheological properties of oil in water model emulsion systems containing Iranian tragacanth gum (TG) (0.5, 1 g/100 ml emulsions), whey protein isolate (WPI) (2, 4 g/100 ml emulsions), and oleic acid (5, 10 ml/100 ml emulsions) were investigated for droplet-size distribution, creaming index, and rheological properties of emulsions. The shear-thinning behavior of all dispersions was modeled using power law, Cross, and Ellis models. The power law model described the flow behavior of dispersions for its lowest standard error (0.29) and highest determination coefficient (R²) (0.99). Rheological investigation showed that both loss (G″) and storage (G′) modules increased as gum and oil content increased. Delta degree was 0.1 and increased as frequency increased, indicating that liquid-like viscose behavior dominated solid-like elastic behavior. Droplet-size distribution was measured by light scattering and microscopic observations revealed a flocculated system. Gum, WPI, and oil contents decreased the emulsion creaming index with gum concentration having the greatest effect.     

Ligandless-ultrasound-assisted emulsification microextraction followed by inductively coupled plasma-optical emission spectrometry for simultaneous determination of heavy metals in water samples

In this study, a simple and efficient method of ligandless-ultrasound-assisted emulsification microextraction (LL-USAEME) followed by inductively coupled plasma-optical emission spectrometry (ICP-OES) has been developed for simultaneous extraction, preconcentration and determination of manganese, cadmium, cobalt and nickel in water samples. In the proposed approach, tetrachloroethylene was selected as extraction solvent. The effect of important experimental factors such as volume of extraction solvent, pH, sonication time, salt concentration, and temperature was investigated by using a fractional factorial design (2^5?1) to identify important factors and their interactions. In the next step, a Box-Behnken design (BBD) was applied for optimisation of significant factors. The obtained optimal conditions were: 30?µL for extraction solvent, 12 for pH, 5?min for sonication time, and 5% w/v for salt concentration. The limits of detections (LODs) for Cd(II), Co(II), Mn(II) and Ni(II) were 0.20, 0.13, 0.21 and 0.28?µg?L^?1, respectively. Relative standard deviations (RSD, C?=?200.0?µg?L^?1, n?=?9) were between 3.4–7.5% and the calibration graphs were linear in the range of 0.25 to 1000.0?µg?L^?1 for Mn, 0.5–1000.0?µg?L^?1 for Co and Ni and 1.0–250.0?µg?L^?1 for Cd. The determination coefficients (R ²) of the calibration curves for the analytes were in the range of 0.993 to 0.999. The proposed method was validated by using two certified reference materials, and also the method was applied successfully for the determination of heavy metals in different real water samples.     

Synthesis,Characterization, and Crystal Structure of a Chromium(III)‐Complex Containing 2,6‐Pyridinedicarboxylic Acid and 1,10‐Phenanthroline

The reaction of solution 2,6‐pyridinedicarboxylic acid and 1,10‐phenanthroline ( 1 ) with CrCl₃·6H₂O led to the complex [Cr(phen)(pydc)(H₂O)][Cr(pydc)₂]·4H₂O ( 2 ) (phen is 1,10‐phenanthroline and pydcH₂ is 2,6‐pyridinedicarboxylic acid). 2 was characterized by elemental analysis, IR spectroscopy and single‐crystal structure determination. Crystal data for 2 at ?80 °C: triclinic, space group , a = 818.5(1), b = 1492.2(1), c = 1533.6(2) pm, α = 76.45(1)°, β = 84.22(1)°, γ = 77.99(1)°, Z = 2, R₁ = 0.0416.     

Copper-catalyzed domino reaction between terminal alkynes,isocyanates, and oxiranes: An atom-economic route to morpholine derivatives

In situ generated copper acetylides react with isocyanates and oxiranes to form a decent range of morpholine derivatives. The reactions proceeded with acceptable yields and excellent regioselectivity. The presence of oxygen and moisture completely inhibited the reaction. The scope of the reaction is wide and the reactions involve consecutive C–C, C–N, and C–O bond formations.     

Modification of the GV-MSA model in obtaining the activity and osmotic coefficients of aqueous electrolyte solutions

In this work a modified form of the Ghotbi–Vera Mean Spherical Approximation model (MGV-MSA) has been used to correlate the mean ionic activity coefficients (MIAC) for a number of symmetric and asymmetric aqueous electrolyte solutions at 25 °C. In the proposed model the hard sphere as well as the electrostatic contributions to the MIAC and the osmotic coefficient of the previously GV-MSA model has been modified. The results of the proposed model for the MIAC of the electrolyte solutions studied in this work are used to directly calculate the values of the osmotic coefficients without introducing any new adjustable parameter. In the MGV-MSA model the cation diameter as well as the relative permittivity of water depends on the electrolyte concentration. Having considered such dependency for both cation and relative permittivity for water in an electrolyte solution the modification of the GV-MSA has been made. It should be stated that in the MGV-MSA model the anion diameter in the solution similar to that in the GV-MSA model remains constant and independent of the electrolyte concentration. The results obtained from the proposed model have been favorably compared with those of the GV-MSA model. The results showed that the MGV-MSA model can more accurately correlate the MIAC of the single electrolyte solutions than those of the GV-MSA model. The same comparison has been observed in case of the osmotic coefficients for the electrolyte solutions studied in this work. It should be noted that in order to do an unequivocal comparison between the results obtained from the models used in this work the same minimization procedure and the same experimental data for the MIAC and the osmotic coefficients have been used. Also it should be mentioned that in the MGV-MSA model the conversion from the McMillan–Mayer (MM) framework to that of the Lewis–Randall (LR) has been performed. It has been concluded that such transformation can affect the results in particular at higher electrolyte concentrations.     

Nanocrystalline TiO2-HClO4:A novel,efficient and recyclable catalyst for the chemoselective N-Boc protection of amines under solvent-free conditions

Nanocrystalline TiO₂-HClO₄,as newly reported catalyst,has been used as an efficient and reusable catalyst for the chemoselective N-Boc protection of amines.The clean,mild acidity condition, quantitative yields of products,short reaction time and low reaction temperature are attractive features of this reaction.In practice,this method is a combination of a satisfactory synthesis and more significantly easy product isolation and purification.     

Synthesis, characterization, mechanochromism and photochromism of [Fe(dm4bt)3][FeCl4]2 and [Fe(dm4bt)3][FeBr4]2, along with the investigation of steric influence on spin state

The complexes [Fe(dm4bt)(3)][FeCl(4)](2) (1) and [Fe(dm4bt)(3)][FeBr(4)](2) (2) were prepared from the reaction of 2,2'-dimethyl-4,4'-bithiazole (dm4bt) with FeCl(3)·6H(2)O and FeBr(3), respectively, in methanol. Both complexes were characterized by IR, UV-Vis and (1)H NMR spectroscopy and their structures were studied by single-crystal diffraction. The methylated bithiazole led to high spin Fe(II) centers in the octahedral cation part of complexes 1 and 2 with Fe-N distance of 2.220 ?, in spite of the low spin octahedral Fe(II) complexes with unsubstituted bithiazole ligands. Crystal structure determination of 2 was performed at 90, 120 and 298 K. Temperature reduction to 90 K resulted in a decrease in the Fe-N bond length to 2.206 ? which is still in the range of high spin Fe(II). Complex 1 shows a reversible mechanochromic effect from the crystalline phase to powder form from red to yellow; it also displays reversible photochromism from yellow to green in solution under sunlight. The magnetic behaviour of the complexes was also studied at 2-300 K. The temperature dependence of χ(m)T curves for the two forms of 1, crystal and powder, demands some changes in their magnetic behavior, causing different colors i.e. red and yellow. At low temperatures, χ(m)T decreases where the decrease starts at around 65 K for compound 1, and at around 100 K for compound 2, due to different counterions. The two complexes exhibit antiferromagnetism at around 4 K.     

Microextraction of phenolic compounds using a fiber coated with a polyaniline-montmorillonite nanocomposite

Microchimica Acta - A highly porous fiber coated polyaniline/montmorillonite clay was prepared for solid-phase microextraction. The nanocomposite was synthesized by in-situ polymerization. The...     

Polypyrrole–montmorillonite nanocomposite as sorbent for solid‐phase microextraction of phenolic compounds in water

A fiber‐coated polypyrrole–montmorillonite nanocomposite was prepared for solid‐phase microextraction. The fiber coating can be prepared easily; it is mechanically stable and exhibits relatively high thermal stability. The prepared fiber was evaluated for the extraction of some phenolic compounds from aqueous sample solutions by gas chromatography–mass spectrometry. The effects of the extraction and desorption parameters including extraction time, extraction temperature, stirring rate, ionic strength, pH and desorption temperature and time have been studied. At optimum conditions, the repeatability for one fiber (n = 5), expressed as % relative standard deviation was between 6.5 and 7.8% for the phenolic compounds. The detection limits for the studied phenolic compounds were between 0.05–1.3 ng/mL. The developed method offers the advantage of being simple to use, with shorter analysis time, lower cost, thermal stability of the fibers, and high relative recovery in comparison to conventional methods of analysis.