High-resolution Mn EXAFS of the oxygen-evolving complex in photosystem II: structural implications for the Mn4Ca cluster

The biological generation of oxygen by the oxygen-evolving complex in photosystem II (PS II) is one of nature's most important reactions. The recent X-ray crystal structures, while limited by resolutions of 3.2-3.5 A, have located the electron density associated with the Mn4Ca cluster within the multiprotein PS II complex. Detailed structures critically depend on input from spectroscopic techniques, such as EXAFS and EPR/ENDOR, as the XRD resolution does not allow for accurate determination of the position of Mn/Ca or the bridging and terminal ligand atoms. The number and distances of Mn-Mn/Ca/ligand interactions determined from EXAFS provide important constraints for the structure of the Mn4Ca cluster. Here, we present data from a high-resolution EXAFS method using a novel multicrystal monochromator that show three short Mn-Mn distances between 2.7 and 2.8 A and, hence, the presence of three di-mu-oxo-bridged units in the Mn4Ca cluster. This result imposes clear limitations on the proposed structures based on spectroscopic and diffraction data and provides input for refining such structures.     

Pb2(OH)2[p‐O2C‐C6H4‐CO2]: Synthese und Kristallstruktur

Pb₂(OH)₂[p‐O₂C‐C₆H₄‐CO₂]: Synthesis and Crystal Structure Single crystals of Pb₂(OH)₂[p‐O₂C‐C₆H₄‐CO₂] ( 1 ) were obtained by hydrothermal reaction of terephthalic acid and PbCO₃ at 180 °C (10 days). 1 crystallizes in the monoclinic space group P2₁/c with Z = 2 (a = 1115.6(2) pm, b = 380.10(4) pm, c = 1141.3(2) pm, β = 93.39(1)°, V = 0.4831(1) nm³). The crystal structure is characterized by ladder‐type Pb(OH)_3/3 double chains, which are connected to a three‐dimensional framework by terephthalate dianions.     

Comparison of the acidity of residual silanol groups in several liquid chromatography columns

The silanol acidity of Waters Resolve C18, Waters Resolve silica, Waters Symmetry C18, Waters Symmetry silica, Waters XTerra MS C18 and underivatized XTerra columns has been measured from the retention of LiNO3 with a methanol/water (60:40) mobile phase buffered to different pH values. The Li+ cation is retained by cationic exchange with the background cation of the mobile phase (Na+) through the ionized silanols. The number of active silanols increases in the order: XTerra MS C18 < Symmetry C18 < underivatized XTerra < Resolve C18 < Resolve silica approximately equal to Symmetry silica. XTerra MS C18 does not present any residual silanol acidity up to s(s)pH 10.0 (pH in 60% methanol) as measured by LiNO3. The underivatized XTerra packing and Symmetry C18 present active silanols only at s(s)pH values higher than 7.0. For the other three columns, two different types of silanols with different acidity (s(s)pKa values about 3.5-4.6 and 6.2-6.8, respectively) have been observed. Symmetry C18 shows evidence of the presence of active basic sites that retain NO3- by anionic exchange.     

The Diammoniates of dipotassiumtetraethinylozincate and -cadmate: K2M(C2H)4.2NH3 (M = Zn, Cd)

By reaction of KC(2)H and K(2)Zn(CN)(4) in liquid ammonia, the diammoniate K(2)Zn(C(2)H)(4).2NH(3) was obtained. K(2)Cd(C(2)H)(4).2NH(3) was synthesized by reacting KC(2)H, Cd(NH(2))(2), and acetylene in liquid ammonia. The crystal structures of the air and temperature sensitive compounds were determined by X-ray single crystal diffraction at low temperatures (T = 170 K). Both compounds crystallize in the monoclinic space group I2/a (No. 15) with Z = 4. K(2)Zn(C(2)H)(4).2NH(3): a = 7.289(1) A, b = 12.765(2) A, c = 14.066(2) A, beta = 98.11(2) degrees. K(2)Cd(C(2)H)(4).2NH(3): a = 7.444(1) A, b = 12.619(3) A, c = 14.304(2) A, beta = 98.94(1) degrees. Characteristic structural motifs are tetrahedral [M(C(2)H)(4)](2-) fragments (M = Zn, Cd) and zigzag chains of edge sharing distorted (C(2)H)(6) octahedra centered by potassium ions. These zigzag chains are connected by a second type of crystallographically distinct potassium ions that also bind to two ammonia molecules.     

Reaktion von Alkyl- und Arylchlorsilanen mit Phosph(III) en-imidamiden

The reaction of RSiCl₃ (R=CH₃, C₂H₅, C₆H₅) and R₂SiCl₂ (R=CH₃) with one mole of the phosphenimidous amides R₂N–P=NR [R=R=Si(CH₃)₃; R=Si(CH₃)₃, R=C(CH₃)₃] yieds a four membered PN₂Si-ring system under elimination of (CH₃)₃SiCl.     

Performance of an ultra-low elution-volume 96-well plate: drug discovery and development applications

Recently, sample preparation has been considered to be the major cause of bottlenecks during high-throughput analysis. With the assistance of robotic liquid handlers and the 96-well plate format, more samples can be prepared for subsequent liquid chromatography/tandem mass spectrometry (LC/MS/MS) analysis. Protein precipitation is still widely used despite potential loss of sensitivity or variable results due to ion suppression. The use of solid-phase extraction (SPE) clearly gives superior results but may not be as cost effective as protein precipitation due to the labor and material costs associated with the process. Here, a novel 96-well SPE plate is described that was designed to minimize the elution volume required for quantitative elution of analytes. The plate is packed with 2 mg of a high-capacity SPE sorbent that allows loading of up to 750 microL of plasma, while the novel design permits elution with as little as 25 microL. Therefore, the plate offers up to a 15-fold increase in sample concentration. The evaporation and reconstitution step that is typically required in SPE is avoided due to the concentrating ability of the plate. Examples of applications in drug discovery/development are shown and results are compared to protein precipitation. Excellent sensitivity and linearity are demonstrated.     

Novel method for bulk resistance evaluation in conductivity measurement for high-purity water

A major issue with the electrolytic conductivity measurement for pure water is the lack of standard or reference methods. A primary method traceable to SI and suitable for pure-water conductivity measurement was developed at the Physikalisch-Technische Bundesanstalt (PTB), Germany, as the base for the calibration method for the conductivity measuring devices at the low conductivity level. This paper provides a novel method to calculate the bulk resistance of pure water using impedance measured at a single frequency, which is one of the key procedures for the primary methods.     

Determination of aluminum in highly concentrated iron samples: Study of interferences using high-resolution continuum source atomic absorption spectrometry

High-resolution continuum source atomic absorption spectrometry (HR-CS AAS) has been used to investigate spectral and non-spectral interferences found with a conventional line source atomic absorption spectrometer in the determination of aluminum in pharmaceutical products containing elevated iron and sugar concentrations. A transversely heated graphite furnace was used as the atomizer in both spectrometers. The two most sensitive aluminum lines at 309.3 nm and 396.2 nm were investigated and it was found that an iron absorption line at 309.278 nm, in the vicinity of the aluminum line at 309.271 nm, could be responsible for some spectral interference. The simultaneous presence of iron and the organic components of the matrix were responsible for radiation scattering, causing high continuous and also structured background absorption at both wavelengths. The aluminum and iron absorption could not be separated in time, i.e., the iron interference could not be eliminated by optimizing the graphite furnace temperature program. However, an interference-free determination of aluminum was possible carrying out the measurements with HR-CS AAS at 396.152 nm after applying least squares background correction for the elimination of the structured background. Analytical working range and other figures of merit were determined and are presented for both wavelengths using peak volume registration (center pixel ± 1) and the center pixel only. Limits of detection and characteristic masses ranged from 1.1 to 2.5 pg and 13 to 43 pg, respectively. The method was used for the determination of the aluminum contamination in pharmaceutical formulations for iron deficiency treatment, which present iron concentrations from 10 to 50 g l^− 1. Spike recoveries from 89% to 105% show that the proposed method can be satisfactorily used for the quality control of these formulations.