Method for Simultaneously Improving the Thermal Stability and Mechanical Properties of Poly(lactic acid): Effect of High-Energy Electrons on the Morphological, Mechanical, and Thermal Properties of PLA/MMT Nanocomposites

Nanocomposites derived from poly(lactic acid) (PLA) and organically modified montmorillonite (oMMT) have been cross-linked by high-energy electrons in the presence of triallyl cyanurate (TAC). The morphology of untreated and cross-linked PLA/MMT nanocomposites was characterized by wide-angle X-ray scattering (WAXS) and transmission electron microscopy (TEM). This treatment can improve both the thermal stability and the glass-transition temperatures of the PLA nanocomposites (e.g., PLA-MMT-TAC 30kGy, 50kGy, and 70kGy) because of the formation of cross-linking structures in the nanocomposites that will considerably reduce the mobility of polymers. Interestingly, at relatively low irradiation doses (e.g., 30 and 50 kGy) a good balance between tensile strength and elongation at break for the PLA nanocomposites could be achieved. These mechanical properties are superior to those of pure PLA. Therefore, combining nanotechnology and electron beam cross-linking is a promising new method of simultaneously improving the mechanical properties (toughness and tensile strength) and thermal stability of PLA.     

Nonlinear current-voltage relationship of the plasma membrane of single CHO cells

The application of electric field pulses to Chinese Hamster Ovary (CHO) cells causes membrane electroporation (MEP). If a voltage or current ramp is applied to the cellular membrane of a single CHO cell, the membrane conductance increases nonlinearly with field strength reaching saturation. In particular, the kinetics of the induced conductance changes represents the data basis for the interpretation in terms of underlying structural changes. The current/voltage characteristic is found to be continuous, but displays occasionally a sharp increase in the conductance. The step-like increases are interpreted to reflect the formation of one (or more) larger pore(s). The analysis of current clamp data yields pores of radius (r(p)) in the range of 2.5< or =r(p)/nm< or =20; the pores of the voltage clamp data are in the range of 2.5< or =r(p)/nm< or =55. The larger pores occur predominantly during hyperpolarising and less frequently during depolarising conditions, respectively. The different kinetics of pore formation in the hyperpolarising condition, where the inward field increases, and the depolarising condition, where the inward field first decreases and then increases in the opposite direction, suggests structural asymmetry with respect to the direction of the electric membrane field. At the required higher voltage, the effect of the resting potential is negligibly small.     

On the Track of Novel Triel‐Stabilised Silylaminoiminoborenes

Borenes and boranes : Silylaminoiminoborenes, such as depicted, were isolated after treatment of halogen triels with silylaminofluoroboranes. In addition, novel aryl‐ and silyl‐substituted diaminofluoroboranes were also prepared in order to substantiate this reaction route.

     

Aldehyde cruciforms: dosimeters for primary and secondary amines

We demonstrate that aldehyde-substituted donor-acceptor cruciforms [1,4-bis(arylethynyl)-2,5-distyrylbenzenes] are useful dosimeters for primary amines, primary diamines, and secondary amines. The 1,n-diamines are particularly reactive towards this dosimeter and can be detected in less than 100 ppm concentration. Using a single aldehyde-functionalized cruciform in seven different solvents allowed us to discern fourteen different amines by digital photography and statistical evaluation of the response patterns extracted as red, green, blue (RGB) values.     

Structural control of surface layer proteins at electrified interfaces investigated by in situ Fourier transform infrared spectroscopy

In situ Fourier Transform Infrared (FTIR) Spectroscopy complemented by Electrochemical Quartz Microbalance (EQMB) investigations allowed a detailed insight into the influence of the electrode potential on competing adsorption processes and bonding mechanisms of buffer ions and S-layer protein molecules of Lysinibacillus sphaericus CCM2177 at an electrified liquid/gold interface. The S-layer proteins adsorb on gold polarized positively of the point of zero charge by displacing perchlorate anions in the Helmholtz plane by their carboxylate groups. This is indicated by an increase of the peptide and carboxylate infrared absorption signals accompanied by a decrease of the perchlorate signal. S-layers interlinked laterally with Ca(2+) ions, positive of the point of zero charge, resulted in the formation of a crystalline layer participating in the Helmholtz layer. In contrast to the absence of the Ca(2+)-linkers, S-layers remain structurally intact also in the negative polarization domain where the Helmholtz layer is solely sustained by mainly solvated cations without participation of the negatively charged protein carboxylate functions.     

Investigation of gaseous metabolites from moulds by Ion Mobility Spectrometry (IMS) and Gas Chromatography-Mass Spectrometry (GC-MS)

The metabolism of moulds results in the formation of various microbial volatile organic compounds (MVOCs). These substances can be used as an indicator for the presence of moulds in the indoor environment. Three different mould strains were cultivated on culture media and IMS spectra of gaseous mould metabolites were recorded using a portable mini system with a tritium source and a 5 cm drift cell. The headspace spectra are characteristic for mould species and their age. Typical gaseous components of the metabolites were identified and compared with results obtained from gas chromatography using a mass spectrometer detector. It was observed that the MVOCs formation depends on mould species and their growing stage with a maximum of MVOCs emission occurring during the first 10 days. These preliminary results show that IMS can be applied to detect MVOCs in indoor environment and indicate hidden mould growth.     

Sensor Array Based Determination of Edman Degradated Amino Acids Using Poly(p-phenyleneethynylene)s

A cross-reactive optical sensor array based on poly(p-phenyleneethynylene)s (PPEs) determines Edman degraded amino acids. We report a sensor array composed of three anionic PPEs P1–P3 , and their electrostatic complexes with metal ions (Fe²⁺, Cu²⁺, Co²⁺). We recorded distinct fluorescence intensity response patterns as “fingerprints” of this chemical tongue toward standard phenylthiohydantoin (PTH) amino acids—degradation products of the Edman process. These “fingerprints” were converted into canonical scores by linear discrimination analysis (LDA), which differentiates all of the PTH-amino acids. This array discriminates PTH-amino acid residues degraded from an oligopeptide through Edman sequencing. This approach is complementary to chromatography approaches which rely on mass spectrometry; our array offers the advantage of simplicity.     

Visible Light-Gated Organocatalysis Using a RuII-Photocage

The light-gated organocatalysis via the release of 4-N,N-dimethylaminopyridine (DMAP) by irradiation of the [Ru(bpy)₂(DMAP)₂]²⁺ complex with visible light was investigated. As model reaction the acetylation of benzyl alcohols with acetic anhydride was chosen. The pre-catalyst releases one DMAP molecule on irradiation at wavelengths longer than 455 nm. The photochemical process was characterized by steady-state irradiation and ultrafast transient absorption spectroscopy. The latter enabled the observation of the ³MLCT state and the spectral features of the penta-coordinated intermediate [Ru(bpy)₂(DMAP)]²⁺. The released DMAP catalyzes the acetylation of a wide range of benzyl alcohols with chemical yields of up to 99 %. Control experiments revealed unequivocally that it is the released DMAP which takes the role of the catalyst.     

Synthese neuer Aminofluorsilane,sowie Alkoxylierung von Bis (trimethylsilyl)-amino-fluorsilanen

The reaction of aminofluorsilanes of the type (R=H,F) (Me ₃Si)₂N?SiF₂R with two moles of ammonia, or of a mono- or dialkylamine, yields the corresponding amino-compounds, e.g. (Me ₃Si)₂N?Si(F)R?NH₂, (Me ₃Si)₂N?Si(F)R?NHR′ and (Me ₃Si)₂N?Si(F)R?NR₂′ (R′=Me, Et). Analogous products are obtained by reaction of the aminofluorosilanes with lithium salts of amines with bulky organic substituents in a 1 : 1 molar ratio. Alkoxy- and aryloxyaminofluorosilanes are prepared by the reaction of sodium alcoholates and sodium phenolate with (Me ₃Si)₂N?Si(F₂)R (R=H, C₂H₃, C₂H₅, C₆H₅). The i.r.-, mass-,¹H- and¹⁹F-NMR spectra of the above compounds are reported.