Magnetic and high-pressure magnetotransport properties of cesium-substituted lanthanum calcium manganites

The nature of the double-exchange (DE) interaction in lanthanum manganites is studied through chemical substitutions, Cs for La, and high-pressure measurements. Static and high-frequency magnetic measurements and high-pressure electrical transport studies were carried out on bulk polycrystalline and radio-frequency sputtered thin films of La_0.7-xCs_xCa_0.3MnO₃ for x=0-0.1. The samples are found to be cubic. Curie temperature T_c measurements provide evidence for bond-length-related weakening of DE as x is increased from 0 to 0.03. For higher x, the bond-angle-related changes lead to an increase in the strength of DE. High-pressure mangetoresistance data indicate both bond length and bond-angle-related increase of 10–20 K/GPa in T_c with pressure, with the largest increase measured for x=0.03. The rate of increase in the Curie temperature with pressure decreases with increasing T_c. Anomalies are observed in the magnetic parameters for x=0.03. The Cs-concentration dependence of the low-temperature saturation magnetization shows a minimum close to x=0.03. Ferromagnetic resonance studies at x-band reveal a 5% decrease in the g-value for x=0.03 relative to the end members (x=0 and 0.1). The low-field magnetostriction for x=0.03 indicates a relatively strong electron–phonon spin coupling compared to neighboring compositions. Received: 15 May 2000 / Accepted: 24 July 2000 / Published online: 9 November 2000     

Charge transport in anodic TiO2 nanotubes studied by terahertz spectroscopy

We report on the photoelectrochemical and terahertz measurements, of the charge transport properties of 1 μm thick self‐organized TiO₂ nanotube layers, prepared by the anodization of titanium. We provide evidence regarding the complexity of electron transport, and dynamics in the nanotubes. Shortly after photoexcitation, charge mobilites in amorphous and crystalline nanotubes are similar, but still lower compared to the bulk anatase. The mobility subsequently decreases due to trapping‐detrapping processes. The recombination rate in anatase nanotubes is much slower than in the amorphous ones, enabling the material to reach an internal photon to electron conversion efficiency exceeding 60%.     

Ultrasonic degradation of aqueous carboxymethylcellulose: effect of viscosity, molecular mass, and concentration

It is well established that prolonged exposure of solutions of macromolecules to high-energy ultrasonic waves produces a permanent reduction in viscosity. It is generally agreed as well and also this study proved the hydrodynamic forces to have the primary importance in degradation. According to this study the sonolytic degradation of aqueous carboxymethylcellulose polymer or polymer mixtures is mainly depended on the initial dynamic viscosity of the polymer solution when the dynamic viscosity values are in the area range enabling intense cavitation. The higher was the initial dynamic viscosity the faster was the degradation. When the initial dynamic viscosities of the polymer solutions were similar the sonolytic degradation was dependent on the molecular mass and on the concentration of the polymer. The polymers with high molecular mass or high polymer concentration degraded faster than the polymers having low molecular mass or low polymer concentration. The initial dynamic viscosities were adjusted using polyethyleneglycol.     

Inelastic scattering of heavy ions at intermediate energies with excitations of nuclear collective states

Excitation of low-lying nuclear collective states upon scattering of heavy ions with energies of several tens of MeV/nucleon has been studied. The interaction potential leading to excitation is chosen in the form of a derivative of the microscopic (or semimicroscopic) nucleus-nucleus double-folding optical potential. Elastic and inelastic scattering cross sections have been calculated within the high-energy approximation; the inelastic scattering amplitude was obtained in the first order in the deformation parameter. The cross sections are compared with the experimental data on scattering of ¹⁷O from a series of nuclei with excitation of the 2⁺ level.     

Third-order Nonlinear Optical Properties of Octa-substituted Metal-free Phthalocyanine Thin Films

Third-order nonlinear optical susceptibility, χ⁽³⁾ of symmetrically octa-substituted metal-free phthalocyanine thin films measured by the third-harmonic generation technique are reported. The metal-free phthalocyanine has been found to show a χ⁽³⁾ (−3ω; ω,ω, ω) value as large as 7.73×10⁻¹² esu at 1.80 μm. The figure of merit, χ⁽³⁾/α, was estimated to be 4.17×10¹⁷ esu cm at 1.05 μm and 6.97×10¹⁶ esu cm at 1.65 μm. Both linear and third-order optical properties of liquid-crystalline metal-free phthalocyanines are discussed     

Comparative validation of amisulpride determination in pharmaceuticals by several chromatographic, electrophoretic and spectrophotometric methods

Depleted uranium (DU) is a by-product of the uranium enrichment process for nuclear fuel. According to the Commission Decision 2002/657/EC, a confirmatory method for the quantification of DU in freeze-dried fish was developed by isotope ratio dynamic reaction cell inductively coupled plasma-mass spectrometry (IR-DRC-ICP-MS). A preliminary study was performed to determine the following parameters: instrumental detection limit (IDL), isotopic ratio measurement limit (IRML), percentage of DU (P(DU)) in presence of natural uranium (NU) and limit of quantification (LoQ(DU)). The analyses were carried out by means of IR-DRC-ICP-MS. Ammonia was the reaction gas used for the dynamic reaction cell. In addition, a sector field inductively coupled plasma mass spectrometer (SF-ICP-MS) was employed to calculate the within-laboratory reproducibility. For the confirmatory method the following parameters were determined: (a) trueness; (b) precision; (c) critical concentrations alpha and beta (CC(alpha), CC(beta)); (d) specificity; (e) stability. Trueness was assessed by using the recovery tests. The recovery and within-laboratory reproducibility were determined by fortifying the blank digested solution of dogfish tissue: six aliquots were fortified at 1, 1.5 and 2 times the LOQ(DU) with 25.0, 37.5 and 50.0 ng L(-1) or 4.16, 6.24, 8.32 microg kg(-1) with a recovery of -8.2, +9.5 and +9.6%, respectively and a within-laboratory reproducibility (three analytical run) of 15.5, 8.0 and 11.0%, respectively. The results for the decision limit and the detection capability were: CC(alpha) = 11.69 ng L(-1) and CC(beta) = 19.8 ng L(-1). The digested solutions resulted to be stable during testing time (60 days) and the method can be considered highly specific as well.     

A structural investigation of the alkali metal site distribution within bioactive glass using neutron diffraction and multinuclear solid state NMR

The atomic-scale structure of Bioglass and the effect of substituting lithium for sodium within these glasses have been investigated using neutron diffraction and solid state magic angle spinning (MAS) NMR. Applying an effective isomorphic substitution difference function to the neutron diffraction data has enabled the Na-O and Li-O nearest-neighbour correlations to be isolated from the overlapping Ca-O, O-(P)-O and O-(Si)-O correlations. These results reveal that Na and Li behave in a similar manner within the glassy matrix and do not disrupt the short range order of the network former. Residual differences are attributed solely to the variation in ionic radius between the two species. Successful simplification of the 2 < r (?) < 3 region via the difference method has enabled all the nearest neighbour correlations to be deconvolved. The diffraction data provides the first direct experimental evidence of split Na-O nearest-neighbour correlations in these melt quench bioactive glasses, and an analogous splitting of the Li-O correlations. The observed correlations are attributed to the metal ions bonded either to bridging or to non-bridging oxygen atoms. (23)Na triple quantum MAS (3QMAS) NMR data corroborates the split Na-O correlations. The structural sites present will be intimately related to the release properties of the glass system in physiological fluids such as plasma and saliva, and hence to the bioactivity of the material. Detailed structural knowledge is therefore a prerequisite for optimizing material design.     

Thermally stable silarylene-1,3,4-oxadiazole polymers

The effects of incorporating a p-phenylene- (or m-phenylene)-1,3,4-oxadiazole fragment into the backbone of poly[1,4-phenylene(diphenylsilyl)-1,4-phenylene-2,5-(1,3,4-oxadiazole)], which was developed by the authors, was investigated. Bis[(p-carbohydrazidophenyl)]diphenylsilane was copolymerized with dipentachlorophenyl terephthalate or isophthalate to produce the prepolymers poly[N-(p-diphenylsilylbenzoyl)-N′N″-(terephthaloyl)-N″′-(p-benzoyl)dihydrazide] and poly[N-(p-diphenylsilylbenzoyl)-N′,-N″-(isophthaloyl)-N″′-p-(benzoyl) dihydrazide], respectively. The polyhydrazides were converted by thermal dehydration into poly[1,4-phenylene(diphenylsilyl)-1,4-phenylene-(1,3,4-oxadiazole-2,5-diyl)-1,4-phenylene-2,5-(1,3,4-oxadiazole)] and poly[1,4-phenyl-ene(diphenylsilyl)-1,4-phenylene-(1,3,4-oxadiazole-2,5-diyl)-1,3,4-(oxadiazole)]. The new polymers were soluble in organic solvents. Films cast from these solutions exhibited good adhesion to glass and metal surfaces. Thermal analysis showed that the heat stability of all these polymers was about the same and that they were resistant to decomposition when heated in air to about 400°C. The results also indicated that these polymers were somewhat less heat-resistant than samples of poly-[1,4-phenylene(diphenylsilyl)-1,4-phenylene-2,5-]1,3,4-(oxadiazole) synthesized from bis(p-carbohydrazidophenyl)diphenylsilane and bis-(p-carbopentachlorophenoxy-phenyl)diphenylsilane.