The Influence of Mineral Impurities on the „Sulphur Puffing”︁ at High Temperature Treatment of Brown Coal Pitch Cokes

Cokes rich in sulphur usually show throughout the high temperature treatment between 1500 and 1800 °C an irreversible dilatation which can be suppressed by additives of inorganic oxides or salts. In brown coal pitch cokes with high content of sulphur and mineral impurities (ash), however, this suphur puffing cannot be observed. Basic ash components (e. g. CaO, Fe₂O₃, MgO) are responsible for the puffing inhibition. The inhibition is already sufficient if the concerntration of basic ash components equals the suphur conentration.     

Preparation and properties of isotactic and syndiotactic poly(methyl methacrylate)s,uniform with respect to molecular weight

Highly isotactic (it-) and highly syndiotactic (st-) poly(methyl methacrylate)s (PMMAs) uniform with respect to molecular weight (stereoregular, uniform PMMAs) were isolated up to the 100mer from it- and st-PMMAs by supercritical fluid chromatography (SFC) and characterized by NMR and mass spectroscopies. Glass transition temperatures (Tg's) of the uniform it- and st-PMMAs were higher than those of the corresponding PMMAs with MWD and with similar molecular weight on average. The Tg values of the uniform it-and st-PMMAs series obeyed the relationship, Tg = Tg∞ - K/M, where M and Tg∞ denote molecular weight and Tg at infinite M, respectively. The reciprocal melting points (1/Tm) of uniform it-PMMA (degree of polymerization, DP = 28–44), obtained from methanol solutions by evaporating the solvent, increased linearly with increasing 1/DP. Extrapolation of the linear relation to 1/DP = 0 gave the Tm of it-PMMA with infinite DP; Tm∞ = 171.1°C. Thermal degradation behavior was studied by thermogravimetry and by SFC analysis of degradation products. In gel-permeation chromatography (GPC) measurements, the it-50mer eluted faster than the st-50mer. Calibration curves for it- and st-PMMAs could be obtained using series of the uniform PMMAs. The instrumental spreading factor determined using it-25mer, it-50mer, st-25mer and st-50mer for our GPC chromatograph was 0.070 ml when the volume of the sample solution was 0.003ml. GPC analysis of a mixture of the it- and st-50mers in tetrahydrofuran indicated formation of a stereocomplex in the solution, and was found quite useful to elucidate the minimum sequence length required for complex formation.     

CE characterization of semiconductor nanocrystals encapsulated with amorphous silicium dioxide

The electrophoretic mobility of silica-encapsulated semiconductor nanocrystals (quantum dots) dependent on the pH and the ionic strength of the separation electrolyte has been determined by CE. Having shown the viability of the approach, the electrophoretic mobility mu of the nanoparticles investigated is calculated for varied zeta potential zeta, particle radius r, and ionic strength I employing an approximate analytical expression presented by Ohshima (J. Colloid Interface Sci. 2001, 239, 587-590). The comparison of calculated with measured data shows that the experimental observations exactly follow what would be expected from theory. Within the parameter range investigated at fixed zeta and I there is an increase in mu with r which is a nonlinear function. This dependence of mu on size parameters can be used for the size-dependent separation of particles. Modeling of mu as function of I and zeta makes it possible to calculate the size distribution of nanoparticles from electrophoretic data (using the peak shape of the particle zone in the electropherogram) without the need for calibration provided that zeta is known with adequate accuracy. Comparison of size distributions calculated via the presented method with size histograms determined from transmission electron microscopy (TEM) micrographs reveals that there is an excellent matching of the size distribution curves obtained with the two independent methods. A comparison of calculated with measured distributions of the electrophoretic mobility showed that the observed broad bands in CE studies of colloidal nanoparticles are mainly due to electrophoretic heterogeneity resulting from the particle size distribution.     

Light emission from nanocrystalline silicon clusters embedded in silicon dioxide: Role of the suboxide states

Silicon clusters embedded in a silicon dioxide matrix were prepared by ultrasound-assisted implantation resulting in a modified concentration of suboxide states as revealed by high-resolution photoelectron spectroscopy. It is suggested that ultrasound treatment results in formation of different interface structure between silicon cluster and silicon dioxide matrix which is characterized by a distinctly reduced concentration of the suboxide states. It is observed that photoluminescence properties are strongly correlated with the concentration of the suboxide states thereby providing an evidence that besides a quantum confinement effect a closer look at the chemical composition of the nc-Si/SiO₂ system is important.     

Development of an HPLC-NMR method for the determination of PAHs in soil samples - a comparison with conventional methods

A hyphenated HPLC-(1)H NMR method for the identification and quantification of PAHs in soil samples has been developed and applied to a PAH reference sample provided by the Federal Institute for Materials Research and Testing (BAM, Berlin, Germany). The results were compared with those obtained by HPLC-DAD, HPLC-F, and GC-MS analyses of the same sample.     

Systematic optimisation of high-performance liquid chromatographic separation by varying the temperature, gradient, and stationary phase

Optimisation of the separation of a synthetic drug mixture by HPLC is performed by changing both continuous variables, i.e. mobile phase composition and temperature, and categorical variables, here the stationary phase. The retention of solutes is described on the basis of a general linear model in which the different columns are modelled by indicator variables. From the solute-specific retention models the global separation optimum is evaluated on the basis of multidimensional window diagrams using relative retentions of all peak pairs as the figure-of-merit.     

The influence of a γ-oxygen in the spacer of liquid crystal side group polysiloxanes on their ferroelectric properties

Two types of side group polysiloxanes which differ in their spacer between backbone and mesogenic part were synthesized via polymer analogous reaction. The impact of an oxygen atom localized in the γ position to the siloxane main chain on the ferroelectric properties was investigated. In addition, the link between the terminal chiral moiety and the mesogenic part in each series was varied. The phase transition behaviour, spontaneous polarization and the electro-optical response time for the two series of polymers are compared. The mesophase structures were determined by X-ray measurements on magnetically oriented samples at different temperatures. The additional oxygen atom in the spacer near to the main chain leads to broader range smectic C* phases and shorter electro-optical response times, which suggests that the ether linkage promotes a better decoupling between main chain and mesogenic side group.