Die Gasphasenintercalation von Graphit durch SbCl4F

Gas Phase Intercalation of Graphite by SbCl₄F Gas Phase Intercalation of Graphite by SbCl₄F using a two-zone technique is a method to prepare intercalation compounds of different stage index n in temperature range between 120 and 140°C. The reaction is a process of successive decrease of stage index. Increasing the reaction time, i. e. concentration, regions of pure stages alternate with two-phase regions. Intercalation compounds were characterized by X-ray technique, EPMA, and chemical methods. The compounds are stable in ordinary air, with aqueous HCl as well as KOH only pentavalent but not any trivalent antimony can be removed. The identity periods along c-axis in pure stages are I_c = 9.33 Å (n = 1), 12.72 Å (n = 2), 16.06 Å (n = 3) and 19.40 Å (n = 4). A (√7 × √ 7) 19.1° in-plane structure of intercalants was found. The uptake curve of mass with time reveals a discontinuity connected with formation of stage 2. Concave shape of curve during starting period at 120 and 125°C will be interpreted as a consequence of an induction time. From X-ray and EPMA studies it may be concluded that nucleation at the prismatic crystal edges controls the kinetics of reaction. Assuming a first order kinetics of filling the vacant sites, the same activation energy in case of formation of stage 1 and stage 2 have been determined approximately (97 and 102 kJ/mol).     

Determination of Arsenic Species in Fish Oil After Acid Digestion

Arsenic speciation is of increasing interest to the food industry, as concerns about high total arsenic concentrations in food can often be alleviated to a great extent if the ratio of toxic, less toxic and non-toxic arsenic compounds in the sample is known. The lipid matrix of fish oil is a challenge in the determination of arsenic species, as current methods for this type of analysis require the analyte to be water-soluble. In this study, two sample preparation techniques were applied. One the one hand water-soluble species were extracted with methanol/water, on the other, acid digestion was applied to release lipid-soluble arsenic compounds into the aqueous phase. Ion chromatography – inductively coupled plasma mass spectrometry (IC-ICP-MS) was used for separation and sensitive element-specific detection of arsenic compounds. Additional experiments, including alkaline hydrolysis, were carried out to find out more about the type of lipids arsenic is bound to in fish oil. Up to eight different arsenic species were detected and quantified in fish oil with dimethylarsinate being the major compound both in the aqueous extract and in the acid digest. No inorganic arsenic was detected in the aqueous extract, and the maximum concentration of arsenate determined in the acid digest was 0.05 μg g⁻¹. The total arsenic concentration determined by ICP-MS ranged from <0.1 to 5 μg g⁻¹. With regard to the mass balance, approximately 1% of the total arsenic content was extractable with methanol/water, whereas the sum of arsenic species quantified after acid digestion yielded 85–100% of the total arsenic content. It was confirmed that the large fraction of arsenic in fish oil not extractable on an aqueous basis consists of organoarsenic compounds. This new approach in sample preparation makes the complete characterization of the arsenic content in the sample possible with regard to the respective species, providing necessary information required for risk assessment.     

Determination and regulation of the migration window in electrokinetic chromatography

The determination of the velocities of the mobile and the pseudostationary phases (the migration (time) window) is mandatory for the determination of physicochemical properties by electrokinetic chromatography (EKC). This review offers a detailed discussion on the definition, the importance, the determination and the regulation of the migration (time) window in EKC. An overview on the theoretical treatment of chromatographic processes in EKC is given defining EKC in comparison to the term capillary electrophoresis. Methods to determine and influence the migration window are discussed with emphasis on measures that have been taken to modify the electroosmotic flow velocity. Pseudostationary phases (or separation carriers) that are taken into consideration are anionic and cationic micelles, mixed micelles, microdroplets (microemulsions), polymeric pseudostationary phases and dendrimers.     

Massenspektrometrische Untersuchungen an einigen Halogeniden der 5. Haupt- und Nebengruppe

The mass spectra of fifth group halids and some of their substitution products have been studied. Fragmentation processes, charge distributions as well as relative stabilities of fragment ions and double-charged ions are discussed. Appearance potentials have been measured and discussed, with reference to decomposition reactions and abundance considerations of fragment ions. In some cases polymeric ions were found in mass spectra.     

Nanotubes fabricated from Ni-naphthalocyanine by a template method

Novel naphthalocyanine (Nc) nanotubes with special wall structures were fabricated by a template method using Nc molecules as building blocks. Thermal stabilization of the ordered columnar structures of the tetrakis(tert-butyl)naphthalocyanine (Ni-BNc) molecules, induced from the pi-pi interactions in the nanoscale channels of an alumina template, resulted in Nc nanotubes with walls consisting of well-ordered Nc molecular disks. Further thermal treatment of Ni-BNc at 600 degrees C produced carbonized Nc nanotubes containing ordered columnar, graphitic wall structures with the graphene disks arranged perpendicular to the tube axis. These nanotubes may be useful for extending the application of Nc molecules for nanodevice fabrication.     

Gas-Phase cationization and protonation of neutrals generated by matrix-assisted laser desorption

The ionization mechanisms involved in matrix-assisted ultraviolet laser desorption/ionization (MALDI) were studied with a time-of-flight mass spectrometer. When protonated or cationized quasimolecular ions generated by MALDI are not extracted promptly, their abundance is a function of the delay time between laser irradiation and ion extraction, maximizing at an optimum delay time (DTM) of a few hundred nanoseconds. The ion abundance at DTM exceeds that of prompt extraction by a factor of 2 or more. Increasing the cation density near the sample surface reduces the DTM, whereas increasing the desorption laser irradiance has the opposite effect. The enhancement suggests extensive gas-phase ion-molecule reactions after irradiation by the desorption laser has ceased.     

Syntheses and Structure of Gd<Subscript>3</Subscript>Rh<Subscript>1.940(7)</Subscript>In<Subscript>4</Subscript>

Summary. The gadolinium–rhodium–indide Gd₃Rh_1.940(7)In₄ was prepared by arc-melting of the elements and subsequent annealing in a corundum crucible in a sealed silica tube. Gd₃Rh_1.940(7)In₄ adopts the hexagonal Lu₃Co_1.87In₄ type, space group , a = 781.4(5), c = 383.8(3) pm, wR2 = 0.0285, BASF = 0.375(1) (merohedric twinning via a twofold axis (xx0)), 648 F² values, 22 variables. The structure is derived from the well known ZrNiAl type through an ordering of rhodium and indium atoms on the Ni2 sites. The Rh/In ordering forces a reduction of the space group symmetry from to , leading to merohedric twinning for the investigated crystal. The Rh1 site has an occupancy of only 94.0(7)%. The investigated crystal had a composition Gd₃Rh_1.940(7)In₄. The main geometrical motif are three types of centered, tricapped trigonal prisms, i.e., [Rh1In2₆Gd₃], [Rh2Gd₆In2₃], and [In1Gd₆In2₃]. The shortest interatomic distances occur for Rh–In (276–296 pm) followed by In–In (297 pm). Together, the rhodium and indium atoms build up a three-dimensional [Rh_1.940(7)In₄] network, in which the gadolinium atoms fill slightly distorted pentagonal channels. The crystal chemistry of Gd₃Rh_1.940(7)In₄ is discussed on the basis of a group-subgroup scheme.     

Facile synthesis and characterization of monocrystalline cubic ZrO2 nanoparticles

Crystalline ZrO₂ nanoparticles were prepared from zirconium isopropoxide by slow hydrolysis and subsequent hydrothermal treatment of solutions containing various amounts of sodium hydroxide at 180 °C. Whereas moderately basic solutions lead to the formation of nanoparticles of monoclinic ZrO₂ with plate-like morphology, and nanoparticles of the cubic ZrO₂ high-temperature polymorph with diameters of approx. 5 nm were obtained from strongly basic solutions. The morphology, structure and properties of as-synthesized nanoparticles were characterized using HRTEM, XRD, Raman spectroscopy, UV–vis, PL spectroscopy and BET measurements. The formation of both, the monoclinic and the cubic polymorph, was confirmed by electron microscopy and Raman spectroscopy. The crystallinity and morphology of the resulting ZrO₂ nanoparticles can be adjusted by the choice of the reaction conditions. The cubic ZrO₂ nanoparticles have a high surface area (300 m²/g) and exhibit a strong photoluminescence in the UV region.     

High-resolution analysis of polyprenols by supercritical fluid chromatography

A high-resolution analysis of polyprenol mixtures was achieved by supercritical fluid chromatography (SFC). The separation of polyprenols was examined on an octadecylsilane-packed column with liquid carbon dioxide as the mobile phase and ethanol as modifier. Using this chromatography system, the resolution of separation (Rs) between octadecaprenol (prenol 18) and nonadecaprenol (prenol 19) was two times higher than that using conventional reversed-phase high-performance liquid chromatography. Our SFC technique allows the advantage of baseline separation of polyprenol samples containing hydrophobic components such as terpenes or fatty acids that are unfavorable for good separation. This method is very useful for the analysis of structurally close polyprenol analogues of rubber plant metabolites.