Quality assurance in immunoassay performance—comparison of different enzyme immunoassays for the determination of caffeine in consumer products

Enzyme immunoassays with optical detection are amongst the most widely used bioanalytical tools. We defined seven parameters for the quality assessment of immunoassays that were addressed in a systematic study of direct and indirect immunoassays, using the enzymes horseradish peroxidase (HRP) and alkaline phosphatase (AP), the chromogenic substrates 3,3′,5,5′-tetramethylbenzidine (TMB) and para-nitrophenyl phosphate, and the fluorescent substrates 3-(4-hydroxyphenyl)propionic acid and 4-methylumbelliferyl phosphate. The same monoclonal antibody against caffeine was used throughout the study. The four quality parameters regarding the standard curve were the test midpoint (sensitivity), the measurement range, the relative dynamic range of the signal, and the goodness of fit of the adjusted four-parameter logistic function. All HRP immunoassays showed a higher sensitivity compared to the AP assays. On the basis of all four criteria, it was established that the direct assay format is superior to the indirect format, the immunoassay using HRP TMB fulfilling all requirements best. In a second step, caffeine concentrations in 24 beverage and cosmetics samples were determined and three more quality parameters were assessed with this application. The direct HRP TMB assay showed one of the best intra- and inter-plate precisions and the best accuracy, defined by the correlation of results with those from the chosen reference method liquid chromatography tandem mass spectrometry (LC-MS/MS). Considering all criteria, HRP TMB seems to be the enzyme substrate system of choice preferably used in the direct assay format.

Bent‐core mesogens based on semi‐flexible dicyclohexylmethane spacers

New, bent‐core mesogens are described in which the core of the molecule is a semiflexible, di(4‐aminocyclohexyl)methane spacer. The compounds show nematic, columnar nematic and columnar phases as shown by a combination of X‐ray diffraction and optical microscopy. The potential of these new mesogens as biaxial nematic candidates is considered.     

Common Trends and Differences in Antioxidant Activity Analysis of Phenolic Substances Using Single Electron Transfer Based Assays

Numerous assays were developed to measure the antioxidant activity, but each has limitations and the results obtained by different methods are not always comparable. Popular examples are the DPPH and ABTS assay. Our aim was to study similarities and differences of these two assay regarding the measured antioxidant potentials of 24 phenolic compounds using the same measurement and evaluation methods. This should allow conclusions to be drawn as to whether one of the assays is more suitable for measuring specific subgroups like phenolic acids, flavonols, flavanones, dihydrochalcones or flavanols. The assays showed common trends for the mean values of most of the subgroups. Some dihydrochalcones and flavanones did not react with the DPPH radical in contrast to the ABTS radical, leading to significant differences. Therefore, to determine the antioxidant potential of dihydrochalcone or flavanone-rich extracts, the ABTS assay should be preferred. We found that the results of the flavonoids in the DPPH assay were dependent on the Bors criteria, whereas the structure–activity relationship in the ABTS assay was not clear. For the phenolic acids, the results in the ABTS assay were only high for pyrogallol structures, while the DPPH assay was mainly determined by the number of OH groups.     

“Golden” Cascade Cyclization to Benzo[c]-Phenanthridines

Herein, we describe a gold-catalyzed cascade cyclization of Boc-protected benzylamines bearing two tethered alkyne moieties in a domino reaction initiated by a 6-endo-dig cyclization. The reaction was screened intensively, and the scope was explored, resulting in nine new Boc-protected dihydrobenzo[c]phenanthridines with yields of up to 98 %; even a π-extension and two bidirectional approaches were successful. Furthermore, thermal cleavage of the Boc group and subsequent oxidation gave substituted benzo[c]phenanthridines in up to quantitative yields. Two bidirectional approaches under the optimized conditions were successful, and the resulting π-extended molecules were tested as organic semiconductors in organic thin-film transistors.     

Tetracyanoquinodimethane Reduction by Complexed Guanidinyl‐Functionalized Aromatic Compounds

In this work, we report on the reduction of tetracyanoquinodimethane (TCNQ) with dicationic complexes of guanidinyl‐functionalized aromatic (GFA) electron donors. In contrast to reduction with free GFAs, milder reduction conditions were achieved, and this led to semiconducting materials with extended TCNQ π stacking. The charge on the TCNQ units was estimated from the structural data obtained by single‐crystal X‐ray diffraction analysis and from IR spectroscopic data. The electrical conductivity was studied and the activation energy of the semiconducting materials was estimated from the temperature dependence of the conductivity.     

Heterogeneous freezing on pyroelectric poly(vinylidene fluoride-co-trifluoroethylene) thin films

Active deicing of technical surfaces, such as for wind turbines and heat exchangers, currently requires the usage of heat or chemicals. Passive coating strategies that postpone the freezing of covering water would be beneficial in order to save costs and energy. One hypothesis is that pyroelectric active materials can achieve this because of the surface charges generated on these materials when they are subject to a temperature change. High-quality poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) thin films with a high crystallinity, prefererd edge-on orientation, low surface roughness, and comprised of the β-analogous ferroelectric phase were deposited by spin-coating. Freezing experiments with a cooling rate of 1 K min⁻¹ were made on P(VDF-TrFE) coatings in order to separate the effect of different parameters such as the poling direction, film thickness, used solvent, deposition process, underlying substrate, and annealing temperature on the achievable supercooling. The topography and the underlying substrate significantly changed the distribution of freezing temperatures of water droplets in contact with these thin films. In contrast, no significant effect of the thickness, morphology, or pyroelectric effect of the as-prepared domain-state on the freezing temperatures was found.     

Identification of Semiconductive Patches in Thermally Processed Monolayer Oxo‐Functionalized Graphene

The thermal decomposition of graphene oxide (GO) is a complex process at the atomic level and not fully understood. Here, a subclass of GO, oxo‐functionalized graphene (oxo‐G), was used to study its thermal disproportionation. We present the impact of annealing on the electronic properties of a monolayer oxo‐G flake and correlated the chemical composition and topography corrugation by two‐probe transport measurements, XPS, TEM, FTIR and STM. Surprisingly, we found that oxo‐G, processed at 300 °C, displays C?C sp³‐patches and possibly C?O?C bonds, next to graphene domains and holes. It is striking that those C?O?C/C?C sp³‐separated sp²‐patches a few nanometers in diameter possess semiconducting properties with a band gap of about 0.4 eV. We propose that sp³‐patches confine conjugated sp²‐C atoms, which leads to the local semiconductor properties. Accordingly, graphene with sp³‐C in double layer areas is a potential class of semiconductors and a potential target for future chemical modifications.     

Preparation and properties of isotactic and syndiotactic poly(methyl methacrylate)s,uniform with respect to molecular weight

Highly isotactic (it-) and highly syndiotactic (st-) poly(methyl methacrylate)s (PMMAs) uniform with respect to molecular weight (stereoregular, uniform PMMAs) were isolated up to the 100mer from it- and st-PMMAs by supercritical fluid chromatography (SFC) and characterized by NMR and mass spectroscopies. Glass transition temperatures (Tg's) of the uniform it- and st-PMMAs were higher than those of the corresponding PMMAs with MWD and with similar molecular weight on average. The Tg values of the uniform it-and st-PMMAs series obeyed the relationship, Tg = Tg∞ - K/M, where M and Tg∞ denote molecular weight and Tg at infinite M, respectively. The reciprocal melting points (1/Tm) of uniform it-PMMA (degree of polymerization, DP = 28–44), obtained from methanol solutions by evaporating the solvent, increased linearly with increasing 1/DP. Extrapolation of the linear relation to 1/DP = 0 gave the Tm of it-PMMA with infinite DP; Tm∞ = 171.1°C. Thermal degradation behavior was studied by thermogravimetry and by SFC analysis of degradation products. In gel-permeation chromatography (GPC) measurements, the it-50mer eluted faster than the st-50mer. Calibration curves for it- and st-PMMAs could be obtained using series of the uniform PMMAs. The instrumental spreading factor determined using it-25mer, it-50mer, st-25mer and st-50mer for our GPC chromatograph was 0.070 ml when the volume of the sample solution was 0.003ml. GPC analysis of a mixture of the it- and st-50mers in tetrahydrofuran indicated formation of a stereocomplex in the solution, and was found quite useful to elucidate the minimum sequence length required for complex formation.