Parahydrogen induced polarization in face of keto-enol tautomerism: proof of concept with hyperpolarized ethanol

Hyperpolarization (HP) techniques are increasingly important in magnetic resonance imaging (MRI) and spectroscopy (MRS). HP methods have the potential to overcome the fundamentally low sensitivity of magnetic resonance (MR). A breakthrough of HP-MR in life sciences and medical applications is still limited by the small number of accessible, physiologically relevant substrates. Our study presents a new approach to extend PHIP to substrates that primarily cannot be hyperpolarized due to a steady intramolecular re-arrangement, the so-called keto-enol tautomerism. To overcome this obstacle we exploited the fact that instead of the instable enol form the corresponding stable ester can be used as a precursor molecule. This strategy now enables the hydrogenation which is required to apply the standard PHIP procedure. As the final step a hydrolysis is necessary to release the hyperpolarized target molecule. Using this new approach ethanol was successfully hyperpolarized for the first time. It may therefore be assumed that the outlined multi-step procedure can be used for other keto-enol tautomerized substances thereby opening the application of PHIP to a multitude of molecules relevant to analyzing metabolic pathways.     

Tetrachlorinated tetraazaperopyrenes (TAPPs): highly fluorescent dyes and semiconductors for air-stable organic n-channel transistors and complementary circuits

A range of 2,9-perfluoroalkyl-substituted tetraazaperopyrene (TAPP) derivatives (1-5) was synthesised by reacting 4,9-diamino-3,10-perylenequinone diimine (DPDI) with the corresponding carboxylic acid chloride or anhydride in the presence of a base. The reaction of compounds 1-4 with dichloroisocyanuric acid (DIC) in concentrated sulphuric acid resulted in the fourfold substitution of the tetraazaperopyrene core, yielding the 2,9-bisperfluoroalkyl-4,7,11,14-tetrachloro-1,3,8,10-tetraazaperopyrenes 6-9, respectively. The optical and electrochemical data demonstrate the drastic influence of the core substitution on the properties. All compounds are highly luminescent (fluorescence quantum yields of up to Φ=0.8). The LUMO energies of the tetrachlorinated TAPP derivatives (determined by cyclic voltammetry and computed by DFT calulations) were found to be below -4?eV. In the course of this work the performance of TAPP derivatives in organic thin-film transistors (TFTs) was investigated, and their n-channel characteristics with field-effect mobilities of up to 0.14?cm(2) V(-1) s(-1) and an on/off current ratio of >10(6) were confirmed. Long-term stabilities of 3-4 months under ambient conditions of the devices were established. Complementary inverters and ring oscillators with n-channel TFTs based on compound 8 and p-channel TFTs based on dinaphtho-[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) were fabricated on a glass substrate.     

A designer bleomycin with significantly improved DNA cleavage activity

The bleomycins (BLMs) are used clinically in combination with a number of other agents for the treatment of several types of tumors, and the BLM, etoposide, and cisplatin treatment regimen cures 90-95% of metastatic testicular cancer patients. BLM-induced pneumonitis is the most feared, dose-limiting side effect of BLM in chemotherapy, which can progress into lung fibrosis and affect up to 46% of the total patient population. There have been continued efforts to develop new BLM analogues in the search for anticancer drugs with better clinical efficacy and lower lung toxicity. We have previously cloned and characterized the biosynthetic gene clusters for BLMs from Streptomyces verticillus ATCC15003, tallysomycins from Streptoalloteichus hindustanus E465-94 ATCC31158, and zorbamycin (ZBM) from Streptomyces flavoviridis SB9001. Comparative analysis of the three biosynthetic machineries provided the molecular basis for the formulation of hypotheses to engineer novel analogues. We now report engineered production of three new analogues, 6'-hydroxy-ZBM, BLM Z, and 6'-deoxy-BLM Z and the evaluation of their DNA cleavage activities as a measurement for their potential anticancer activity. Our findings unveiled: (i) the disaccharide moiety plays an important role in the DNA cleavage activity of BLMs and ZBMs, (ii) the ZBM disaccharide significantly enhances the potency of BLM, and (iii) 6'-deoxy-BLM Z represents the most potent BLM analogue known to date. The fact that 6'-deoxy-BLM Z can be produced in reasonable quantities by microbial fermentation should greatly facilitate follow-up mechanistic and preclinical studies to potentially advance this analogue into a clinical drug.     

1,3,6,8-Tetraazapyrenes: synthesis, solid-state structures, and properties as redox-active materials

A series of new tetraazapyrene (TAPy) derivatives has been synthesized by reducing 1,4,5,8-tetranitronaphthalene to its corresponding tin salt (I) and reacting it with perfluorinated alkyl or aryl anhydrides. The resulting 2,7-disubstituted TAPy molecules and the known parent compound 1,3,6,8-tetraazapyrene (II) have been further derivatized by core chlorination and bromination. The brominated compounds served as starting materials for Suzuki cross-coupling reactions with electron-poor arylboronic acids. Single-crystal X-ray analyses established polymorphism for some TAPy compounds. The ground-state geometries of all new TAPy derivatives were modeled with DFT methods [B3PW91/6-31 g(d,p) and B3PW91/6-311+g(d,p)], especially focusing on the energies of the lowest unoccupied molecular orbital (LUMO) and the electron affinities (EA) of the molecules. The results of the calculations were confirmed experimentally by cyclic voltammetry to evaluate the substitution effects at the 2 and 7 position and the core positions, respectively, and gave LUMO energy levels that range from -3.57 to -4.14 eV. Fabrication of organic field-effect transistors (OFETs) with several of these tetraazapyrenes established their potential as organic n-type semiconductors.     

Improved focused ion beam target preparation of (S)TEM specimen--a method for obtaining ultrathin lamellae

Specimen quality is vital to (scanning) transmission electron microscopy (TEM) investigations. In particular, thin specimens are required to obtain excellent high-resolution TEM images. Conventional focused ion beam (FIB) preparation methods cannot be employed to reliably create high quality specimens much thinner than 20 nm. We have developed a method for in situ target preparation of ultrathin TEM lamellae by FIB milling. With this method we are able to routinely obtain large area lamellae with coplanar faces, thinner than 10 nm. The resulting specimens are suitable for low kV TEM as well as scanning TEM. We have demonstrated atomic resolution by Cs-corrected high-resolution TEM at 20 kV on a FIB milled Si specimen only 4 nm thick; its amorphous layer measuring less than 1 nm in total.     

pH-induced release from P2VP-PEO block copolymer vesicles

The pH-induced release of hydrophilic dyes from poly(2-vinylpyridine-b-ethylene oxide) (P2VP-PEO) block copolymer vesicles is investigated. The structure of the vesicles is characterized using small-angle neutron scattering (SANS) and cryo-electron microscopy (cryo-TEM). A decrease of the pH below 5 leads to protonation and dissolution of the poly-2-vinylpyridine blocks which induces rupture and dissolution of the vesicle membrane. Details of the rupture, dissolution, and release process are studied by fluorescence video microscopy, gel electrophoresis, and high-performance ultrafiltration.     

Thermo-mechanical description of material diffusion during an ultrasonic wire bonding process

The volume diffusion during an ultrasonic wire bonding process leads to a material transport between the wire and the material of the substrate and thus creates an intermetallic phase between them. In order to investigate this process, the thermal and mechanical mechanisms occurring during wire bonding should be studied. For this purpose, finite element simulations based on coupled thermo-mechanical equations are performed to study the temperature and stress distribution in and around the interface. The final objective of the model is to develop a growth law for the intermetallic phases by considering the mechanical work applied to the wire in addition to the temperature increase at the interface. (© 2011 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Calibration-free concentration determination of charged colloidal nanoparticles and determination of effective charges by capillary isotachophoresis

Although colloidal nanoparticles show an electrophoretic heterogeneity under the conditions of capillary electrophoresis, which can be either due to the particle-size distribution and/or the particle shape distribution and/or the zeta-potential distribution, they can form correct isotachophoretic zones with sharp-moving boundaries. Therefore, the technique of isotachophoresis permits to generate plugs in which the co-ions and counter ions of the original colloidal solution are removed and replaced by the buffering counter ions of the leading electrolyte. It is shown that analytical isotachophoresis can be used to measure directly, without calibration, the molar (particle) concentration of dispersed ionic colloids provided that the transference number and the mean effective charge number of the particles (within the isotachophoretic zone) can be determined with adequate accuracy. The method can also be used to measure directly the effective charge number of biomacromolecules or colloidal particles, if solutions with known molar (particle) concentration can be prepared. The validity of the approach was confirmed for a model solution containing a known molar concentration of bovine serum albumin.