Synthesis and α-Glucosidase Inhibition Activity of 2-[3-(Benzoyl/4-bromobenzoyl)-4-hydroxy-1,1-dioxido-2H-benzo[e][1,2]thiazin-2-yl]-N-arylacetamides: An In Silico and Biochemical Approach

Diabetes mellitus (DM) is a chronic disorder and has affected a large number of people worldwide. Insufficient insulin production causes an increase in blood glucose level that results in DM. To lower the blood glucose level, various drugs are employed that block the activity of the α-glucosidase enzyme, which is considered responsible for the breakdown of polysaccharides into monosaccharides leading to an increase in the intestinal blood glucose level. We have synthesized novel 2-(3-(benzoyl/4-bromobenzoyl)-4-hydroxy-1,1-dioxido-2H-benzo[e][1,2]thiazin-2-yl)-N-arylacetamides and have screened them for their in silico and in vitro α-glucosidase inhibition activity. The derivatives 11c, 12a, 12d, 12e, and 12g emerged as potent inhibitors of the α-glucosidase enzyme. These compounds exhibited good docking scores and excellent binding interactions with the selected residues (Asp203, Asp542, Asp327, His600, Arg526) during in silico screening. Similarly, these compounds also showed good in vitro α-glucosidase inhibitions with IC₅₀ values of 30.65, 18.25, 20.76, 35.14, and 24.24 μM, respectively, which were better than the standard drug, acarbose (IC₅₀ = 58.8 μM). Furthermore, a good agreement was observed between in silico and in vitro modes of study.     

Role of calcination on geopolymerization of lateritic clay by alkali treatment

In the present study, the role of calcination of a low iron lateritic clay sample was investigated to synthesize the geopolymer. The analyses like X-ray fluorescence (XRF) spectroscopy for chemical composition, X-ray diffractometry (XRD) for mineral composition, and Fourier transform infrared (FT-IR) spectroscopy & scanning electron microscopy (SEM) for structural changes upon calcination at 500, 700 and, 900 °C were used to assess the suitability of selected lateritic clay sample for geopolymer. The drop in electrical conductivity and greater consumption of calcium hydroxide by CS-900 confirmed its potential reactivity than CS-700, CS-500, and CS-Control. The quality of geopolymer derived from un-calcined and calcined lateritic clay samples by alkali activation was evaluated by comparing results of compressive strength, water absorption test, and stability in the aggressive environment of chloride, FT-IR, XRD, and SEM analyses. The experimental results reveal that the quality of geopolymer enhances as the calcination temperature of the lateritic clay sample increases, However, calcination of the lateritic clay sample at 900 °C gives significant results and yield good quality geopolymer with 24.8 MPa of compressive strength, 7.07% of water absorption and 2.22% loss in mass in an aggressive environment.     

Double-diffusive Cattaneo–Christov squeezing flow of micropolar fluid

Journal of Thermal Analysis and Calorimetry - An incompressible magnetized flow of micropolar fluid is confined between two disks. The lower disk is stationary, while the upper disk moves in upward...     

An overview on enzyme-mimicking nanomaterials for use in electrochemical and optical assays

Various kinds of nanomaterials have been described in recent years that represent stable and low-cost alternatives to biomolecules (such as enzymes) for use in (bio)analytical methods. The materials typically include, metal/metal oxides, metal complexes, nanocomposites, porphyrins, phthalocyanines, smart polymers, and carbonaceous nanomaterials. Due to their biomimetic and other properties, such nano-materials may replace natural enzymes in chemical sensors, biosensors, and in various kinds of bioassays. This overview (with 252 references) highlights the analytical potential of such nanomaterials. It is divided into sections on (a) the types of nanomaterials according to their intrinsic nature, (b) non-enzymatic sensor designs (including electrochemical, colorimetric, fluorescent and chemiluminescent methods), and (c), applications of non-enzymatic sensors in the biomedical, environmental and food analysis fields. We finally address current challenges and future directions.

Open image in new window

Graphical abstract This review discusses different types of nanomaterials, which are explored as a potential biomimetic material to replace the natural enzyme in the field of biosensors, and have found widespread applications in biomedical, food and environmental analysis.

     

Influence of PZC (Point of Zero Charge) on the Static Adsorption of Anionic Surfactants on a Malaysian Sandstone

Static adsorption studies of two anionic surfactants produced in our lab are reported. The adsorption of surfactants on the rock samples was investigated with and without the presence of alkali. The point of zero charge (PZC) values were determined for the sandstone samples employing three titrimetric methods and it was found to be at pH 7.98. The relationship between the adsorption degree and pH value of brine below and above the PZC is discussed. It was found that at the pH of solution exceeds the PZC of the rock, the adsorption was 0.43 and 0.86mg/g of rock for the two surfactants. However, at pH values below PZC, the adsorption as high as 3.66 and 4.49mg/g for the two surfactants. The synthesized surfactants are found to be suitable for the EOR applications at pH values higher than the PZC of the rock sample.     

CO2 Mobility and CO2/Brine Interfacial Tension Reduction by Using a New Surfactant for EOR Applications

The synthesis and use in enhanced oil recovery applications of a novel CO₂-philic surfactant derived from maleic anhydride and 2-butyl-1-octanol is reported. The synthesis involved the esterification of maleic anhydride to produce diester followed by sulfonation of the esterified product. The esterification reaction parameters were optimized for the maximum yield of 98.4%. By employing a silica sulfuric acid catalyst, the reaction kinetics of esterification were also investigated. The activation energy was found to be 45.58 kJ/mol. The sulfonation reaction of the esterified product was performed by using sodium bisulfite, and a yield of 82% of surfactant was achieved. The synthesized surfactant lowered the interfacial tension between CO₂/brine to 3.1 mN/m and effectively reduced the CO₂ mobility. This surfactant has a great potential to be used for CO₂ mobility control for CO₂?EOR applications.      

Synthesis of a New CO2 Philic Surfactant for Enhanced Oil Recovery Applications

The synthesis of CO₂ philic surfactant using maleic anhydride and 4-tert-butylbenzyl alcohol is reported. We reacted maleic anhydride with 4-tert-butylbenzyl alcohol to form bis(4-(tert-butyl)benzyl) fumarate and sulfonated the produced diester. The esterification reaction was optimized for a maximum yield of 98% of bis(4-(tert-butyl)benzyl) fumarate. First-order reaction kinetics with respect to acid was observed. The activation energy was found to be 55.62 kJ/mol. The sulfonated product of diester was obtained by the sulfonation reaction and the yield of 82% of surfactant was achieved. The in-house developed surfactant effectively lowered down the IFT between CO_2/brine to 4.2 mN/m. This surfactant is targeted for CO₂-EOR applications.     

Theoretical antineutrino detection,direction and ranging at long distances

In this paper we introduce the concept of what we call “NUDAR” (NeUtrino Direction and Ranging), making the point that measurements of the observed energy and direction vectors can be employed to passively deduce the exact three-dimensional location and thermal power of geophysical and anthropogenic neutrino sources from even a single detector. Earlier studies have presented the challenges of long-range detection, dominated by the unavoidable inverse-square falloff in neutrinos, which force the use of kiloton scale detectors beyond a few kilometers. Earlier work has also presented the case for multiple detectors, and has reviewed the background challenges. We present the most precise background estimates to date, all handled in full three dimensions, as functions of depth and geographical location. For the present calculations, we consider a hypothetical 138 kiloton detector which can be transported to an ocean site and deployed to an operational depth. We present a Bayesian estimation framework to incorporate any a priori knowledge of the reactor that we are trying to detect, as well as the estimated uncertainty in the background and the oscillation parameters. Most importantly, we fully employ the knowledge of the reactor spectrum and the distance-dependent effects of neutrino oscillations on such spectra. The latter, in particular, makes possible determination of range from one location, given adequate signal statistics. Further, we explore the rich potential of improving detection with even modest improvements in individual neutrino direction determination. We conclude that a 300 MW_th reactor can indeed be geolocated, and its operating power estimated with one or two detectors in the hundred kiloton class at ranges out to a few hundred kilometers. We note that such detectors would have natural and non-interfering utility for scientific studies of geo-neutrinos, neutrino oscillations, and astrophysical neutrinos. This motivates the development of cost effective methods of constructing and deploying such next generation detectors.     

Di­chloro­bis­(tri­methyl­ene­thio­urea‐κS)antimony(III) chloride

In the title compound, [SbCl₂(C₄H₈N₂S)₂]Cl, the coordination around the Sb atom can be described as distorted pseudo‐octahedral. Both rings of the tri­methyl­ene­thio­urea ligands [alternatively 3,4,5,6‐tetrahydropyrimidine‐2(1H)‐thione] adopt an envel­ope conformation. The mol­ecules are connected into dimers in the ab plane by two intermolecular hydrogen bonds. The dimers are arranged into infinite one‐dimensional chains along the a axis as a result of the Cl^? ions forming intermolecular hydrogen bonds with three NH groups.     

Fabrication of silver nanoparticles in pH responsive polymer microgel dispersion for catalytic reduction of nitrobenzene in aqueous medium

Copolymer microgels based on N-isopropylacrylamide (NIPAM) and methacrylic acid (MAA) have been synthesized by free radical emulsion polymerization using N,N-methylenebisacrylamide (BIS) as a cross-linker. Synthesized microgels were characterized by Fourier transform infrared spectroscopy (FTIR). Then silver nanoparticles were fabricated in the synthesized microgels by in-situ reduction of AgNO₃ with NaBH₄. The formation of silver nanoparticles was confirmed by UV–Vis spectroscopy. The pH sensitivity of the copolymer microgels was investigated using dynamic light scattering technique (DLS). Hydrodynamic radius of P (NIPAM–MAA) microgels increases with increase in pH of the medium at 25°C. Surface plasmon resonance wavelength (λ_SPR) of silver nanoparticles increases with increase in hydrodynamic radius due to change in pH of the medium. The catalytic activity for the reduction of nitrobenzene (NB), an environmental pollutant, into aniline was investigated by UV–Vis spectroscopy in excess of NaBH₄ using hybrid microgels as catalyst. The value of apparent rate constant (k_app) of the reaction was calculated using pseudo first order kinetic model and it was found to be linearly related to the amount of catalyst. The results were compared with literature data. The system was found to be an effective catalyst for conversion of NB into aniline.