(Dibenzyl sulfoxide‐κO)bis(1,3‐diphenylpropane‐1,3‐dionato‐κ2O,O′)dioxouranium(VI)

In the title compound, [UO₂(C₁₅H₁₁O₂)₂(C₁₄H₁₄OS)], the U^VI atom is coordinated by seven O atoms in a distorted pentagonal–bipyramidal geometry. Both di­phenyl­propane‐1,3‐dionate systems are nearly planar. The sulfoxide moiety is in a distorted tetrahedral geometry, while its two aromatic rings are nearly orthogonal to one another. The crystal packing is stabilized by two bifurcated hydrogen‐bonding interactions involving both uranyl O atoms.     

A quick method for the determination of the Al/Si weight ratio in alumino-silicates using an Am-Be neutron source

An irradiation procedure with fast and thermal neutrons from a 5 Ci Am-Be isotopic neutron source irradiation facility in combination with a 3'3' NaI(Tl) detector system has been used to determine Al/Si weight ratios in alumino-silicates. Samples were irradiated with and without Cd cover for 10 minutes and counted for 10 minutes after a waiting time of 1 minute. The peak area analysis of the 1779 keV gamma-ray line of ²⁸Al product radionuclide produced via ²⁷Al(n,γ)²⁸Al and ²⁸Si(n,p)²⁸Al reactions in combination with the neutron flux parameter at the irradiation site and nuclear data were used to determine Al/Si ratios. Due to discrepancy in literature data, Am-Be neutron source spectrum averaged cross sections of (n,p) reactions on ²⁷Al, ²⁸Si and ⁵⁶Fe were determined by the activation technique using ¹¹⁵In(n,n')^115mIn as the fast neutron flux monitor reaction. The method was tested using mixtures of high-purity Al₂O₃ and SiO₂ with known weight ratios of Al/Si and validated by a certified reference material BCS-CRM 348 (Ball Clay). Results are presented for bentonite, kaolin, bauxite, feldspar and ball clay samples from Nigeria. The method is non-destructive, rapid and suitable for use in-situ for large-scale exploration works and industrial process control. This revised version was published online in July 2006 with corrections to the Cover Date.     

Preparation and crystal structural characterization of Cu(II) complex with piperidine-4-carboxylic acid

Copper(II) complex with piperidine-4-carboxylic acid (HPipe-4), Cu(HPipe-4)₄(ClO₄)₂ (I) was prepared and characterized by IR, X-ray diffraction, and thermal analysis. The crystal is orthorhombic with space group Ccca, Z = 8, a =17.415(3) , b =17.399(2) , c = 21.426(3) . The copper atom has a square surrounding and is coordinated by four carboxylato oxygen atoms in monodentate coordination mode. Full-matrix least-squares refinements gave a final R value of 0.0723 for 22169 reflections. The complex consists of two perpendicularly arranged molecules differing slightly in conformations and shows a three-dimensional polymeric structure formed by hydrogen bonds.__________From Koordinatsionnaya Khimiya, Vol. 31, No. 4, 2005, pp. 302–305.Original English Text Copyright © 2005 by Yang, Zhang, Tian, Wu, Liu, Usman, Chantrapromma, Fun.This article was submitted by the authors in English.     

A 1:1 adduct of hexa­methylene­tetramine and 4‐hydroxy‐3‐methoxy­benz­aldehyde

In the title complex, C₆H₁₂N₄·C₈H₈O₃, the hexa­methyl­ene­tetramine mol­ecule accepts a single intermolecular O—H?N hydrogen bond from the hydroxy group of the 4‐hydroxy‐3‐methoxy­benz­aldehyde moiety. The non‐centrosymmetric crystal structure is built from alternating molecular sheets of 4‐hydroxy‐3‐methoxy­benz­aldehyde and hexa­methyl­ene­tetramine mol­ecules, and is stabilized by intermolecular O—H?N, C—H?O and C—H?π interactions.     

1,1′‐Di­acetyl‐3‐hydroxy‐2,2′,3,3′‐tetra­hydro‐3,3′‐bi(1H‐indole)‐2,2′‐dione

In the title compound, C₂₀H₁₆N₂O₅, both of the 1‐acetyl­isatin (1‐acetyl‐1H‐indole‐2,3‐dione) moieties are planar and form a dihedral angle of 74.1 (1)°. Weak intermolecular hydrogen bonds and C—H?π interactions stabilize the packing in the crystal.     

Piperazine‐1,4‐diium–2,4‐dinitrophenolate–water (1/2/2)

In the title 1/2/2 adduct, C₄H₁₂N₂²⁺·2C₆H₃N₂O₅^?·2H₂O, the dication lies on a crystallographic inversion centre and the asymmetric unit also has one anion and one water mol­ecule in general positions. The 2,4‐di­nitro­phenolate anions and the water mol­ecules are linked by two O—H?O and two C—H?O hydrogen bonds to form molecular ribbons, which extend along the b direction. The piperazine dication acts as a donor for bifurcated N—H?O hydrogen bonds with the phenolate O atom and with the O atom of the o‐nitro group. Six symmetry‐related molecular ribbons are linked to a piperazine dication by N—H?O and C—H?O hydrogen bonds.     

Rhodium-Catalyzed Asymmetric Synthesis of 1,2-Disubstituted Allylic Fluorides

Although there are many methods for the asymmetric synthesis of monosubstituted allylic fluorides, construction of enantioenriched 1,2-disubstituted allylic fluorides has not been reported. To address this gap, we report an enantioselective synthesis of 1,2-disubstituted allylic fluorides using chiral diene-ligated rhodium catalyst, Et₃N ⋅ 3HF as a source of fluoride, and Morita Baylis Hillman (MBH) trichloroacetimidates. Kinetic studies show that one enantiomer of racemic MBH substrate reacts faster than the other. Computational studies reveal that both syn and anti π-allyl complexes are formed upon ionization of allylic substrate, and the syn complexes are slightly energetically favorable. This is in contrast to our previous observation for formation of monosubstituted π-allyl intermediates, in which the syn π-allyl conformation is strongly preferred. In addition, the presence of an electron-withdrawing group at C2 position of racemic MBH substrate renders 1,2-disubstituted π-allyl intermediate formation endergonic and reversible. To compare, formation of monosubstituted π-allyl intermediates was exergonic and irreversible. DFT calculations and kinetic studies support a dynamic kinetic asymmetric transformation process wherein the rate of isomerization of the 1,2-disubstituted π-allylrhodium complexes is faster than that of fluoride addition onto the more reactive intermediate. The 1,2-disubstituted allylic fluorides were obtained in good yields, enantioselectivity, and branched selectivity.     

Potato peels as solid waste for the removal of heavy metal copper(II) from waste water/industrial effluent

A new sorbent potato peels, which are normally discarded as solid waste for removing toxic metal ion Cu(II) from water/industrial waste water have been studied. Potato peels charcoal (PPC) was investigated as an adsorbent of Cu(II) from aqueous solutions. Kinetic and isotherm studies were carried out by studying the effects of various parameters such as temperature, pH and solid liquid ratios. The optimum pH value for Cu(II) adsorption onto potato peels charcoal (PPC) was found to be 6.0. The thermodynamic parameters such as standard Gibb's free energy (Delta G degrees ), standard enthalpy (Delta H degrees ) and standard entropy (DeltaS degrees ) were evaluated by applying the Van't Hoff equation. The thermodynamics of Cu(II) adsorption onto PPC indicates its spontaneous and exothermic nature. The equilibrium data at different temperatures were analyzed by Langmuir and Freundlich isotherms.     

Reconstruction of large phylogenetic trees: a parallel approach

Reconstruction of phylogenetic trees for very large datasets is a known example of a computationally hard problem. In this paper, we present a parallel computing model for the widely used Multiple Instruction Multiple Data (MIMD) architecture. Following the idea of divide-and-conquer, our model adapts the recursive-DCM3 decomposition method [Roshan, U., Moret, B.M.E., Williams, T.L., Warnow, T, 2004a. Performance of suptertree methods on various dataset decompositions. In: Binida-Emonds, O.R.P. (Eds.), Phylogenetic Supertrees: Combining Information to Reveal the Tree of Life, vol. 3 of Computational Biology, Kluwer Academics, pp. 301-328; Roshan, U., Moret, B.M.E., Williams, T.L., Warnow, T., 2004b. Rec-I-DCM3: A Fast Algorithmic Technique for reconstructing large phylogenetic trees, Proceedings of the IEEE Computational Systems Bioinformatics Conference (ICSB)] to divide datasets into smaller subproblems. It distributes computation load over multiple processors so that each processor constructs subtrees on each subproblem within a batch in parallel. It finally collects the resulting trees and merges them into a supertree. The proposed model is flexible as far as methods for dividing and merging datasets are concerned. We show that our method greatly reduces the computational time of the sequential version of the program. As a case study, our parallel approach only takes 22.1h on four processors to outperform the best score to date (Found at 123.7h by the Rec-I-DCM3 program [Roshan, U., Moret, B.M.E., Williams, T.L., Warnow, T, 2004a. Performance of suptertree methods on various dataset decompositions. In: Binida-Emonds, O.R.P. (Eds.), Phylogenetic Supertrees: Combining Information to Reveal the Tree of Life, vol. 3 of Computational Biology, Kluwer Academics, pp. 301-328; Roshan, U., Moret, B.M.E., Williams, T.L., Warnow, T., 2004b. Rec-I-DCM3: A Fast Algorithmic Technique for reconstructing large phylogenetic trees, Proceedings of the IEEE Computational Systems Bioinformatics Conference (ICSB)] on one dataset. Developed with the standard message-passing library, MPI, the program can be recompiled and run on any MIMD systems.     

Enhancement in the supercapacitive storage performance of MnCO<Subscript>3</Subscript> using SiO<Subscript>x</Subscript> nanofluid-based electrolyte

Generally adopted strategies to improve capacitance of the electrode materials are tuning various properties of the electrode material or increasing the cell voltage. While tuning the properties of the electrode material is tedious, increasing the cell voltage is restricted by the stability of the electrolyte. Herein, we report a facile approach to improve the capacitance of MnCO₃ by the influence of SiO_x nanofluid in the electrolyte. The capacitance properties of MnCO₃ are studied in 0.1 M Mg(ClO₄)₂ electrolyte in the presence and in the absence of SiO_x nanofluid. The presence of small amount of SiO_x nanofluid in the electrolyte provides higher diffusivity and more conductive percolation paths for ions and thus decreases internal resistance and increases ionic conductivity of the electrolyte. As a result, 60% enhancement in the capacitance is witnessed for MnCO₃. Further, nanofluid containing electrolyte is found to be stable over a month.

Open image in new window

Graphical abstract Improvement in the capacitance properties of MnCO by the influence of SiO nanofluid