Detecting cortical lesions in multiple sclerosis at 7 T using white matter signal attenuation

Cortical lesions have recently been a focus of multiple sclerosis (MS) MR research. In this study, we present a white matter signal attenuating sequence optimized for cortical lesion detection at 7 T. The feasibility of white matter attenuation (WHAT) for cortical lesion detection was determined by scanning eight patients (four relapsing/remitting MS, four secondary progressive MS) at 7 T. WHAT showed excellent gray matter-white matter contrast, and cortical lesions were hyperintense to the surrounding cortical gray matter, The sequence was then optimized for cortical lesion detection by determining the set of sequence parameters that produced the best gray matter-cortical lesion contrast in a 10-min scan. Despite the B1 inhomogeneities common at ultra-high field strengths, WHAT with an adiabatic inversion pulse showed good cortical lesion detection and would be a valuable component of clinical MS imaging protocols.     

Luminescence in Dy<Superscript>3+</Superscript> and Eu<Superscript>3+</Superscript> Activated K<Subscript>3</Subscript>Al<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

The Dy³⁺ and Eu³⁺ activated K₃Al₂ (PO₄)₃ phosphors were prepared by a combustion synthesis. From a powder X-ray diffraction (XRD) analysis the formation of K₃Al₂ (PO₄)₃ was confirmed. In the photoluminescence emission spectra, the K₃Al₂(PO₄)₃:Dy³⁺ phosphor emits two distinctive colors: blue and yellow whereas K₃Al₂(PO₄)₃:Eu³⁺ emits red color. Thus the combination of colors gives BYR (blue–yellow–red) emissions can produce white light. These phosphors exhibit a strong absorption between 340 and 400 nm which suggest that present phosphor is a promising candidate for producing white light-emitting diodes (LED).     

Deposition of copper iodide thin films by chemical bath deposition (CBD) and successive ionic layer adsorption and reaction (SILAR) methods

In this paper, we report structural, morphological, electrical studies of copper iodide (CuI) thin films deposited onto glass substrates by chemical bath deposition (CBD) and successive ionic layer adsorption and reaction (SILAR) methods. CuI thin films were characterized for their structural, morphological and wettability studies by means of X-ray diffraction (XRD), FT-Raman spectroscopy, scanning electron microscopy (SEM), optical absorption, and contact angle measurement methods. Thickness of thin films was 1 ± 0.1 μm measured by gravimetric weight difference method. The CuI thin films were nanocrystalline, with average crystal size of ～60 nm. The FT-IR study confirmed the formation of CuI on the substrate surface. SEM images revealed the compact and cube like structure for CuI thin films deposited by CBD and SILAR methods, respectively. Optical absorption study revealed optical energy gaps as 2.3 and 3.0 eV for CBD and SILAR methods, respectively. Wettability study indicated that CuI thin films deposited by SILAR method are more hydrophobic as compared to CBD method.     

Conformational flexibility of xanthene‐based covalently linked dimers

The conformational flexibility of three covalently linked dimers consisting of two xanthene‐based moieties connected by a diphenyl ether linker was studied using NMR spectroscopy, X‐ray crystallography, and density functional theory (DFT) calculations. The three dimers interconvert as a function of pH: the doubly cationic dimer (Xan⁺)₂ exists in acidic solutions (pH < 0.5), the mono‐alcohol monocation Xan⁺–Xan‐OH at intermediate pH values (pH = 1–3), and the neutral diol at the highest pH‐values (pH > 3). Each dimer exhibits conformational degrees of freedom associated with rotations of either the xanthene moiety or of the diphenyl ether (DPE) linker. The barriers for rotation of the xanthylium moiety were evaluated using DFT calculations, yielding values of 23 kcal/mol for (Xan⁺)₂ and 11 kcal/mol for (Xan‐OH)₂, respectively. The rotational barrier for the diphenyl ether linker in Xan⁺–Xan‐OH (15 kcal/mol) was experimentally determined using variable temperature NMR measurements. The relative orientation of the two –OH groups in (Xan‐OH)₂ diol was investigated in solution and the solid state using NMR spectroscopy and X‐ray crystallography. The conformer observed in the solid state was found to be the In–Out conformer, while free rotation of the xanthenol units is thought to occur on the NMR timescale at room temperature. These studies are relevant for the design of linkers for efficient water oxidation catalysts. Copyright © 2016 John Wiley & Sons, Ltd.     

Thermally stimulated discharge current (TSDC) characteristics in β-phase PVDF–BaTiO3 nanocomposites

β-phase polyvinylidene fluoride (PVDF)–BaTiO₃ nanocomposite samples have been prepared by solution mixing method. XRD data represent that the crystallinity of PVDF decreases with increase in loading level of BaTiO₃ nanoparticles. DSC curve represents that the melting point of PVDF is lightly affected by loading concentration of BaTiO₃. The morphology and microstructure of PVDF and PVDF embedded by BaTiO₃ nanofillers were investigated by using inverted contrast microscopy (ICM) and scanning electron microscopy (SEM). FTIR interferrometry is proven that PVDF and BaTiO₃ are not chemically interacting; therefore, interaction of BaTiO₃ is van der Waals type of interaction. The thermally stimulated discharge current (TSDC) of PVDF and PVDF–BaTiO₃ nanocomposites sample was characterized by single peak. The observed TSDC peak is discussed on the basis of dipolar and interfacial polarization.     

Third body modeling in fretting using the combined finite-discrete element method

A new approach was developed for modeling the effect of the third body on fretting. This was accomplished using the combined finite-discrete element method (FDEM) in which the third body is analyzed as discrete elements while the first bodies are modeled using finite elements. This approach provides a link between large scale models which treat the mass of wear debris as a single or small number of bodies and small scale models which only study a control volume. The FDEM was used to analyze the behavior of third body particles between flat sliding surfaces. When the third body mass is composed of unconnected particles, it behaves as a Newtonian fluid, but this behavior ceases when the particles are connected into platelets. The FDEM was also used to study the behavior of third body particles inside a Hertzian line contact. As the number of particles and platelet size increase the load carried by the worn slip zone grows larger in relationship to the unworn stick zone.     

Cyclic Codes over the Integers Modulop

The purpose of this paper is twofold. First, we generalize the results of Pless and Qian and those of Pless, Solé, and Qian for cyclic ₄-codes to cyclic _p^m-codes. Second, we establish connections between this new development and the results on cyclic _p^m-codes obtained by Calderbank and Sloane. We produce generators for the cyclic _p^m-codes which are analogs to those for cyclic ₄-codes. We show that these may be used to produce a single generator for such codes. In particular, this proves that the ringR_n= _p^m[x]/(xⁿ− 1) is principal, a result that had been previously announced with an incorrect proof. Generators for dual codes of cyclic _p^m-codes are produced from the generators of the corresponding cyclic _p^m-codes. In addition, we also obtain generators for the cyclicp^m-ary codes induced from the idempotent generators for cyclicp-ary codes.     

Einstein<Emphasis Type="Italic">A</Emphasis>-coefficients for rotational transitions in the ring-chain isomer of C<Subscript>5</Subscript>H<Subscript>2</Subscript>

Laboratory formation of four isomers of C⁵H² molecule is reported and detection of the ring-chain isomer (isomer 1) of C₅H₂ in cosmic objects has been suggested. For identification of a molecule in cosmic objects, one of the required input data is EinsteinA-coefficients (radiative transition probabilities) for the molecule. Here, we report EinsteinA-coefficients for electric dipole transitions in the ring-chain isomer of C₅H₂ among the rotational levels of the ground electronic and ground vibrational states up to 21 cm⁻¹.     

CsF promoted rapid synthesis of spirooxindole-pyran annulated heterocycles at room temperature in ethanol

A newer, versatile, and straightforward synthetic strategy for the construction of functionalized spirooxindole-pyran annulated heterocycles is described. The procedure is based on CsF-promoted rapid tandem Knoevenagel-Michael-Cyclocondensation reaction of isatin, malononitrile, and 4-hydroxycoumarin/barbituric acids/pyrazolone at room temperature in ethanol. This methodology has various advantages like easy operational, excellent yields within short reaction time (3-25 min), and simple isolation of products. The CsF has a dual role as a base and carbonyl activator.