Structural and optical properties of RF magnetron sputtered aluminum nitride films without external substrate heating

We report structural and optical properties of aluminum nitride (AlN) thin films prepared by RF magnetron sputtering. A ceramic AlN target was used to sputter deposit AlN films without external substrate heating in Ar-N₂ (1:1) ambient. The X-ray diffraction and high resolution transmission electron microscopy results revealed that the films were preferentially oriented along c-axis. Cross-sectional imaging revealed columnar growth perpendicular to the substrate. The secondary ion mass spectroscopy analysis confirmed that aluminum and nitrogen distribution was uniform within the thickness of the film. The optical band gap of 5.3 eV was evaluated by UV-vis spectroscopy. Photo-luminescence broad band was observed in the range of 420-600 nm with two maxima, centered at 433 nm and 466 nm wavelengths related to the energy states originated during the film growth. A structural property correlation has been carried out to explore the possible application of such important well oriented nano-structured two-dimensional semiconducting objects.     

NIR to visible upconversion in Er/Yb co-doped CaYAl3O7 phosphor obtained by solution combustion process

Using the combustion synthesis, CaYAl₃O₇:Er³⁺ phosphor powders co-doped with Yb³⁺ have been prepared at low temperatures (550 °C) in a few minutes. Formation of the compound was confirmed by X-ray powder diffraction. Near-infrared to visible upconversion fluorescence emission in the Er³⁺ doped CaYAl₃O₇ phosphor powder has been observed. The effect of co-doping with triply ionized ytterbium in the CaYAl₃O₇:Er³⁺ phosphor has been studied and the process involved is discussed.     

Designing of endlessly single mode polarization maintaining highly birefringent nonlinear micro-structure fiber at telecommunication window by FV-FEM

An endlessly single mode highly polarization maintaining nonlinear microstructure fiber at telecommunication window is reported via full-vector finite element method. By taking three ring hexagonal PCF with suitable fiber parameter such as air hole diameter in cladding region d = 0.8 μm, pitch 2.3 μm and introducing four symmetrical large air holes near core region d′ = 2 μm, single mode (V_eff ≤ π), small effective mode area 2.7 μm², nonlinear co-efficient 44.39 W⁻¹ km⁻¹, high phase birefringence of the order of 10⁻³ and group birefringence of the order of 10⁻⁴ with beat length 0.3 μm at wavelength 1.55 μm are achieved.     

Structural,electronic, optical,elastic and thermal properties of ZnXAs<Subscript>2</Subscript> (X = Si and Ge) chalcopyrite semiconductors

We report first principles calculations of solid state properties of ZnSiAs₂ and ZnGeAs₂ chalcopyrite semiconductors. The structural properties are calculated using a Full Potential Linearized Augmented Plane Wave method (FP-LAPW) of the Density Functional Theory (DFT). A Generalized Gradient Approximation (GGA) scheme proposed by Wu and Cohen (WC) has been chosen to calculate electronic and optical properties. Optical features such as dielectric functions, refractive indices, extinction coefficient, optical reflectivity, absorption coefficients and optical conductivities were calculated for photon energies up to 30 eV. The elastic constants at equilibrium in tetragonal structure are also determined. Temperature effect on the volume, thermal expansion, heat capacity, Debye temperature, entropy, Grüneisen parameter and bulk modulus were calculated employing the quasi-harmonic Debye model at different temperatures and pressures and the silent results were interpreted. Finally using semi-empirical relation, we determined the hardness of the materials which attributed to different covalent bonding strengths.     

Multimodal approach for diagnosis of bacterial etiology in brain abscess

Background and purpose

Proton magnetic resonance spectroscopy (PMRS) has high sensitivity and specificity for the detection of pyogenic brain abscess and the categorization of bacteria. But the metabolite patterns failed to evaluate the etiology of disease when the culture results are sterile. The aim of the present study is to compare the multimodality techniques viz., conventional culture, MR spectroscopy and 16S rRNA PCR and sequencing for rapid diagnosis of etiology in brain abscess and evaluate the PMRS in culture sterile samples and also demonstrate the sensitivity and specificity of these techniques.

Methods

Thirty five patients underwent MRI on a 3 T MRI and in-vivo PMRS for the diagnosis and evaluation of various resonances of metabolites such as lipid (LIP), lactate (LAC), acetate (AC), amino acid (AC), succinate (SUC). Pus was collected for identification of etiologic agents by culture and molecular method.

Results

In 35 samples, metabolite patterns were as follows: LIP/LAC/AA, n = 17, LIP/LAC/AA/SUC with or without AC, n = 17 and LIP/LAC/AA/AC, n = 1. Culture showed bacterial growth in 22 samples (18 aerobic/facultative anaerobic, 9 anaerobic) whereas molecular method was detected 26 aerobic/facultative anaerobic, 13 anaerobic, 4 microaerophilic bacteria. Among the 13 sterile samples, molecular method detected 16 microorganisms along with 3 mixed infections and PMRS recognized metabolite patterns as LIP/LAC/AA, n = 5 and LIP/LAC/AA/SUC with or without AC, n = 8. The sensitivity of in-vivo PMRS in sterile samples was 100% and 75%, and specificity was 75% and 100% for aerobic and anaerobic organisms respectively.

Conclusion

Based on metabolite resonances, PMRS can detect slow growing and fastidious organisms and classify them into aerobic and anaerobic bacteria which are difficult to culture by conventional method. It can categorize microorganisms even in culture sterile samples with rational sensitivity and specificity which may allow early choice of targeted therapy.     

Influence of small DC bias field on the electrical behaviour of Sr- and Mg-doped lanthanum gallate

One of the promising electrolyte materials for solid oxide fuel cells application, Sr- and Mg-doped lanthanum gallate La_0.9Sr_0.1Ga_0.8Mg_0.2O_3-δ (LSGM), is synthesized by conventional solid state ceramic route. X-ray Rietveld analysis confirms the formation of main orthorhombic phase at room temperature along with a few minor secondary phases. SEM micrograph reveals the grain and grainboundary morphology of the system. Electrical conductivity of the LSGM sample is measured in the temperature range 573–873 K and in the frequency range 20 Hz–1 MHz at a few small DC bias fields (at 0.0, 0.5, 1.0, 1.5 and 2.0 V). The conductivity spectra show power-law behaviour. Electrical conductivity of the sample is found to be weakly dependent on DC bias field. This is attributed to field-dependent bulk and grainboundary conduction processes. In the present system, under investigated bias field range, the possibility of formation of Schottky barrier is ruled out. The concept of grainboundary channel (pathway) modulation on the application of bias field is proposed.     

Formation of aligned ZnO nanorods on self-grown ZnO template and its enhanced field emission characteristics

We report a novel method for producing aligned ZnO nanorods (ANR) on self-grown ZnO template in a single step process involving growth of ZnO by vapor transport, followed by quenching of growing ZnO flux in liquid nitrogen. In the present study Zn powder turns into ZnO sheet under oxygen flow at ∼900 °C and bottom surface of the sheet acts as template for the growth of ANR. It is revealed from XRD and EDAX analysis that the bottom of the sheet is Zn rich region and acts as self catalyst for the growth of ANR. The grown nanorods have length up to several tens of micrometers with diameters ranging from ∼100 to 150 nm. Microstructural analysis of ANR indicates the fractal like configuration. The field emission properties have been investigated for ANR with fractal geometry using the ANR on self-grown ZnO template as a cathode directly. The turn-on electric field required to draw current density of ∼1.0 μA/cm² has been found to be ∼0.98 V/μm. The field enhancement factor based on Fowler-Nordheim (F-N) plot was found to be ∼7815 for ANR. The fractal geometry of ANR has been shown to be advantageous for achieving improved field emission features. The present investigations of synthesis involving formation of ANR over self-grown ZnO template, together with fractal configuration of the as-synthesized ANR, are first of their type.     

Signatures of Noncommutative Geometry in Muon Decay for Nonsymmetric Gravity

It is shown how to identify potential signatures of noncommutative geometry within the decay spectrum of a muon in orbit near the event horizon of a microscopic Schwarzschild black hole. This possibility follows from a re-interpretation of Moffat’s nonsymmetric theory of gravity, first published in Phys. Rev. D 19:3554, 1979, where the antisymmetric part of the metric tensor manifests the hypothesized noncommutative geometric structure throughout the manifold. It is further shown that for a given sign convention, the predicted signatures counteract the effects of curvature-induced muon stabilization predicted by Singh and Mobed in Phys. Rev. D 79:024026, 2009. While it is unclear whether evidence for noncommutative geometry may become observable anytime soon, this approach at least provides a useful direction for future quantum gravity research based on the ideas presented here.     

Tuning the resonance in high-temperature superconducting terahertz metamaterials

In this Letter, we present resonance properties in terahertz metamaterials consisting of a split-ring resonator array made from high-temperature superconducting films. By varying the temperature, we observe efficient metamaterial resonance switching and frequency tuning. The results are well reproduced by numerical simulations of metamaterial resonance using the experimentally measured complex conductivity of the superconducting film. We develop a theoretical model that explains the tuning features, which takes into account the resistive resonance damping and additional split-ring inductance contributed from both the real and imaginary parts of the temperature-dependent complex conductivity. The theoretical model further predicts more efficient resonance tuning in metamaterials consisting of a thinner superconducting split-ring resonator array, which are also verified in subsequent experiments.     

White organic light emitting diodes based on DCM dye sandwiched in 2-methyl-8-hydroxyquinolinolatolithium

Stable white electroluminescence (EL) has been achieved from organic LED, in which an ultrathin 4-(dicyanomethylene)-2-methyl-6-(p-dimethyl-aminostyryl)-4H-pyran (DCM) dye layer has been inserted in between two 2-methyl-8-hydroxyquinolinolatolithium [LiMeq] emitter layer and by optimizing the position of the DCM dye layer from the α-NPD/LiMeq interface. Electroluminescence spectra, current-voltage-luminescence (I-V-L) characteristics of the devices have been studied by changing the position of the dye layer. As the distance of DCM layer from α-NPD/LiMeq interface is increased, the intensity of host emission enhances rapidly. Introduction of thin layer of DCM in emissive layer increases the turn on voltage. The best Commission International de L’ Eclairage (CIE) coordinates i.e. (0.32, 0.33) were obtained with device structure ITO/α-NPD(30 nm) /LiMeq(10 nm)/DCM(1 nm)/LiMeq(25 nm)/BCP(6 nm)/Alq₃(28 nm)/LiF(1 nm)/Al(100 nm). The EL spectrum covers the whole visible spectra range 400-700 nm. The color rendering index (CRI) for our best white light (Device 4) is 47.4. The device shows very good color stability in terms of CIE coordinates with voltages. The maximum luminescence 1240 cd/m⁻² has been achieved at 19 V.