Preparation,Characterization and Electromagnetic Shielding Effectiveness of Conductive Polythiophene/Poly(ethylene terephthalate) Composite Fibers

Conductive polythiophene (PTh)/poly(ethylene terephthalate) (PET) composite fibers were prepared by polymerization of thiophene in the presence of PET fibers in acetonitrile medium using FeCl₃. The effects of polymerization conditions such as oxidant/monomer mol ratio and polymerization temperature and time on PTh content and surface electrical resistivity of PTh/PET composite fiber were investigated in detail. It was observed that the usage of preswelled PET fibers in dichloromethane increased the PTh content and decreased surface resistivity of composite fiber. Composite fiber having the highest PTh content (5.7%) and the lowest surface resistivity (80 kΩ) was obtained at 20°C with 1.25 M FeCl₃ and 0.42 M thiophene concentrations. The washing effects of laundering detergent and dry cleaning liquid on surface resistivity of composite fibers were investigated. The electromagnetic shielding effectiveness (EMSE) and relative shielding efficiency by absorption and reflection of composite fibers were measured in the radio and microwave frequency range. The results show that the EMSE values decreased with increasing frequency from radio waves to microwaves with an attenuation of 21 dB to 4 dB.     

Synthesis in water-free DMF, characterization, electrical, and gas sensing properties of bis[2-(2-aminoethylamino)ethanol]copper(II) dibromide

2-(2-Aminoethylamino)ethanol (L) reacts with cupric bromide in dimethylformamide to give a mononuclear complex of Cu(II) [L₂Cu]Br₂, with six-coordinate distorted octahedral geometry, in which two molecules of tridentate (N,N,O) ligand are involved. The structure was confirmed by spectroscopic methods, elemental and thermogravimetric analyses, and magnetic measurements. Optimization of possible configurations indicated the formation of the trans structure of the complex. Experimental results indicate that the investigated complex, bis[2-(2-aminoethylamino)ethanol] copper(II) bromide, behaves as a semiconductor in the studied temperature range of 298–388 K. Gas sensing properties of the film for the volatile organic compounds (VOCs): acetone, tetra-chloromethane, chloroform, ethanol, and methanol, were also investigated as a function of vapor concentration and temperature in dark. The film showed maximum sensitivity to tetrachloromethane and ethanol vapors at room temperature. Responses of the film to the tested gases are reversible.     

Cobalt-modified nickel–zinc catalyst for electrooxidation of methanol in alkaline medium

Cobalt-modified nickel-zinc catalyst CuNi(Zn)Co is prepared on a copper substrate by using electrodeposition. Its catalytic efficiency for methanol oxidation is studied with cyclic voltammetry, chronoamperometry, and chronopotentiometry techniques. The surface morphology and chemical composition of catalyst are characterized by scanning electron microscopy and energy dispersive X-ray spectroscopy. The oxidation kinetic parameters activation energy (Ea), active species on the surface (Γ), and rate constant (k) are determined from cyclic voltammograms which are performed at different methanol concentrations and temperatures. The results show that Ni(Zn)Co catalyst has higher catalytic activity than Ni, Co, and NiZn coatings as a composite catalyst for a promising choice of methanol electrooxidation in the alkaline medium.     

The uranium recovery from aqueous solutions using amidoxime modified cellulose derivatives. IV. Recovery of uranium by amidoximated hydroxypropyl methylcellulose

Amidoxime modified hydroxypropyl methylcellulose (HPMC) films (HPMC-g-AO) were used for the recovery of uranium from aqueous solutions by a complexation process. The adsorption experiments were carried out by immersion of a certain amount of films in UO₂ ²⁺ solutions (resultant pH 4.1) ranging in concentration from 100 to 1,000 ppm. The effect of temperature (25–50 °C) on the adsorption capacity of HPMC-g-AO was investigated at the optimized time. The adsorption kinetics and the thermodynamics as well as the adsorption capacity of HPMC-g-AO films were investigated. The adsorption capacity was found as 765 mg UO₂ ²⁺/g dry film. The kinetic and the thermodynamic parameters (i.e. activation energy, enthalpy, entropy and Gibbs free energy) for the interaction of UO₂ ²⁺ with HPMC-g-AO were calculated based on known basic relations. The results showed that adsorption occurred through strong electrostatic interactions with an enthalpy of ?36.5 kJ/mol. The desorption of UO₂ ²⁺ were investigated using different desorption agents such as EDTA, HCl, NaHCO₃, and NaOH. After the 2 weeks treatment period, the highest desorption yield were found as 23 % with NaHCO₃.     

Thermal decomposition kinetics of polypyrrole and its star shaped copolymer

Thermal behavior of 2,4,6-tris(4-(1H-pyrrol-1-yl)phenoxy)-1,3,5-triazine monomer, polypyrrole, and their star shaped copolymer, were investigated using TG and DTA methods. It was found that Tria melts at 517 K and after than it starts to decompose. Decomposition proceeded in two stages which were corresponding to removal of branched groups and remaining core structure degradation, respectively. Polypyrrole and copolymer showed similar thermal behaviors. These compounds decomposed in three stages which are removal of solvent, removal of dopant anion and rest of structure decomposition. The calculation of activation energies of all reactions were realized using model-free (KAS and FWO) methods. The graphs were prepared which show the alteration of activation energy with decomposition ratio. Thermal analysis results showed that dopant anion and solvent removal activation energy values for copolymer are lower than polypyrrole. Star shaped loose-packed novel structure greatly facilitates solvent and dopant anion removal from copolymer. It can be concluded also that thermal analysis can be used as predict package structure of conducting polymers.     

Investigation of radiocesium biokinetics in Manila clam (Ruditapes philippinarum)

This study was carried out to better understand the biokinetics of radiocesium in clams living in sediment. The accumulation and depuration kinetics of ¹³⁴Cs were investigated in the Manila clam (Ruditapes philippinarum) under controlled laboratory conditions. The concentration factor was found to be 3.0 for ¹³⁴Cs in the whole body; however, the concentration factor in the soft part of the clams (12) was significantly higher than those in the whole body and shell (0.80). The depuration kinetics of the radionuclide were described by a two-component exponential model for the whole body. The biological half-lives in the fast and slow components were found to be 0.63 and 22.1 days, respectively. The depuration kinetics for ¹³⁴Cs in the soft parts were described by a single-component exponential model with a resultant the biological half-life of 18.0 days.     

Optimization of Microwave-Assisted Extraction (MAE) for the Isolation of Antioxidants from Basil (Ocimum basilicum L.) by Response Surface Methodology (RSM)

Abstract

The recovery of antioxidants from basil (Ocimum basilicum L.) was modeled with the aid of response surface methodology (RSM) using microwave-assisted extraction (MAE). Face-centered central design (FCCD) was employed to optimize the MAE operational parameters including the extraction time (1 to 7?min), extraction temperature (30 to 120?°C), solid-to-solvent ratio (0.1 to 0.4), and solvent concentration (20 to 80% ethanol, v/v), and to obtain the best possible combinations of these parameters for a high antioxidant yield from basil. The total antioxidant capacity (TAC) was expressed in trolox (TR) equivalents per gram of dried sample (DS). Three of the operational parameters (temperature, extraction time and solvent concentration) were shown to have significant effect on the extraction efficiency of antioxidants in basil extracts (p?<?0.05). The solvent concentration was shown to be the most significant factor on antioxidant yield obtained by MAE. There was a close relationship between experimental and predicted values using the proposed method. This optimized MAE method shows an application potential for the efficient extraction of antioxidants from basil in the food and pharmaceutical industries.     

Determination of Bismuth in Bottled and Mineral Water Samples at Trace Levels by T-Shaped Slotted Quartz tube-Atom Trap-Flame Atomic Absorption Spectrometry

An accurate and reliable analytical method for the determination of bismuth at trace levels in bottled and mineral water samples has been developed based on hydrogen assisted T-shape slotted quartz tube-atom trap-flame atomic absorption spectrometry (T-SQT-AT-FAAS). Conventional FAAS is not sufficiently sensitive to measure trace and ultra-trace levels of metals due to the low nebulization efficiency and short residence time of atoms in the light path. To overcome this problem, atom trapping with a T-shaped slotted quartz tube was coupled to the FAAS system. Bismuth atoms were trapped on the surface of T-SQT and released by hydrogen gas, which provided a reducing environment. All of the system parameters such as flame type, hydrogen flow rate, the height of T-SQT from the burner head, and trapping period were optimized to enhance the analytical signal to attain low detection limits. After obtaining the optimum conditions, the limit of detection and limit of quantitation of the developed method were found to be 0.95 and 3.2?µg L^?1, respectively. Recovery values were obtained between 90% and 104% that showed good accuracy and applicability of the proposed method to the analysis of bottled and mineral water samples.     

Reversible Immobilization of Urease by Using Bacterial Cellulose Nanofibers

In this work, bacterial cellulose nanofibers were produced by using the Gluconacetobacter hansenii HE1 strain. These nanofibers were derivatized with dye affinity ligand Reactive Green 5, and these newly synthesized dye-attached nanofibers were used for affinity adsorption of urease. Reactive Green 5-attached nanofibers were characterized by Fourier transform infrared spectroscopy, SEM, and energy-dispersive x-ray spectroscopy analysis. Some adsorption conditions which significantly affect the adsorption efficiency were investigated. The maximum urease adsorption capacity was found to be 240 mg/g nanofiber in pH 6.0 and at room temperature. Dye-free plain nanofibers also used for studying nonspecific urease adsorption onto plain nanofibers and nonspecific adsorption were found to be negligible (3.5 mg/g nanofiber). Prepared dye-attached nanofibers can be used in five successive adsorption/desorption steps without any decrease in their urease adsorption capacity. The desorption rate of the adsorbed urease was found to be 98.9 %. The activity of the urease was also investigated, and it was found that free and desorbed urease from the dye-attached nanofibers showed similar specific activity.     

Synthesis,characterization, and application of silver nanoparticle‐thiophenol nanocomposite film on the glassy carbon surface

In this study, 4‐thiophenol modified glassy carbon electrode was prepared by the reduction of 4‐diazothiophenol tetrafluoroborate salt. Silver nanoparticles were attached to the thiophenol modified surface to prepare a thiophenol‐silver nanoparticle composite film. 4‐Aminothiopenol molecules were deposited by self‐assembling technique to form multi‐layered nanofilms of TP/SNP/PhNH₂ on glassy carbon substrate. These surfaces were characterized by cyclic voltammetry, electrochemical impedance spectroscopy, X‐ray photoelectron spectroscopy, reflectance‐absorption infrared spectroscopy, and ellipsometry at each multilayer film growth process. Atomic force microscopic images of GC/TP/SNP/PhNH₂ surfaces were also acquired. The characterization methods show that the amine group containing surface permits the subsequent modification by a variety of coupling reactions for the immobilization of more complex systems. An application of the electrode modification for the determination of uric acid with a significantly lower detection limit is described. Copyright © 2013 John Wiley & Sons, Ltd.