Differential promoter methylation may be a key molecular mechanism in regulating BubR1 expression in cancer cells

The BubR1 mitotic-checkpoint protein monitors proper attachment of microtubules to kinetochores, and links regulation of chromosome-spindle attachment to mitotic-checkpoint signaling. Thus, disruption of BubR1 activity results in a loss of checkpoint control, chromosomal instability caused by a premature anaphase, and/or the early onset of tumorigenesis. The mechanisms by which deregulation and/or abnormalities of BubR1 expression operate, however, remain to be elucidated. In this study, we demonstrate that levels of BubR1 expression are significantly increased by demethylation. Bisulfite sequencing analysis revealed that the methylation status of two CpG sites in the essential BubR1 promoter appear to be associated with BubR1 expression levels. Associations of MBD2 and HDAC1 with the BubR1 promoter were significantly relieved by addition of 5-aza-2'-deoxycytidine, an irreversible DNA methyltransferase inhibitor. However, genomic DNA isolated from 31 patients with colorectal carcinomas exhibited a +84A/G polymorphic change in approximately 60% of patients, but this polymorphism had no effect on promoter activity. Our findings indicate that differential regulation of BubR1 expression is associated with changes in BubR1 promoter hypermethylation patterns, but not with promoter polymorphisms, thus providing a novel insight into the molecular regulation of BubR1 expression in human cancer cells.     

Coptidis rhizoma extract protects against cytokine-induced death of pancreatic beta-cells through suppression of NF-kappaB activation

We demonstrated previously that Coptidis rhizoma extract (CRE) prevented S-nitroso-N-acetylpenicillamine-induced apoptotic cell death via the inhibition of mitochondrial membrane potential disruption and cytochrome c release in RINm5F (RIN) rat insulinoma cells. In this study, the preventive effects of CRE against cytokine-induced beta-cell death was assessed. Cytokines generated by immune cells infiltrating pancreatic islets are crucial mediators of beta-cell destruction in insulin-dependent diabetes mellitus. The treatment of RIN cells with IL-1beta and IFN-gamma resulted in a reduction of cell viability. CRE completely protected IL-1beta and IFN-gamma-mediated cell death in a concentration-dependent manner. Incubation with CRE induced a significant suppression of IL-1beta and IFN-gamma-induced nitric oxide (NO) production, a finding which correlated well with reduced levels of the iNOS mRNA and protein. The molecular mechanism by which CRE inhibited iNOS gene expression appeared to involve the inhibition of NF-kappaB activation. The IL-1beta and IFN-gamma-stimulated RIN cells showed increases in NF-kappaB binding activity and p65 subunit levels in nucleus, and IkappaB alpha degradation in cytosol compared to unstimulated cells. Furthermore, the protective effects of CRE were verified via the observation of reduced NO generation and iNOS expression, and normal insulin-secretion responses to glucose in IL-1beta and IFN-gamma-treated islets.     

PMA-induced up-regulation of MMP-9 is regulated by a PKCalpha-NF-kappaB cascade in human lung epithelial cells

Expression of matrix metalloproteinase-9 (MMP-9) is associated with airway remodeling and tissue injury in asthma. However, little is known about how MMP-9 is up-regulated in airway epithelial cells. In this study, we show that phorbol myristate acetate (PMA) induces MMP-9 expression via a protein kinase Calpha (PKCalpha)-dependent signaling cascade in BEAS-2B human lung epithelial cells. Pretreatment with either GF109203X, a general PKC inhibitor, or Go6976, a PKCalpha/beta isozyme inhibitor, inhibited PMA-induced activation of the MMP-9 promoter, as did transient transfection with PKCalpha antisense oligonuclotides. PMA activated NF-kappaB by phosphorylating IkappaB in these cells and this was also inhibited by GF109203X and Go6976, suggesting that PKCa acts as an upstream regulator of NF-kappaB in PMA-induced MMP-9 induction. Our results indicate that a "PKCalpha-NF- kappaB"-dependent cascade is involved in the signaling leading to PMA-induced MMP-9 expression in the lung epithelium.     

Poly(diphenylacetylene)s with Electron‐Donating Alkoxy and Electron‐Withdrawing Fluoroalkyl Groups: Effect of the Substituent on Fluorescence

New poly(diphenylacetylene)s with alkoxy and fluoroalkyl groups as electron‐donating and electron‐withdrawing groups, respectively, were synthesized by using a WCl₆‐n‐Ph₄Sn catalyst. The polymer solutions emitted strong, bluish‐green lights when photo‐excited. The polymers that contained the electron‐donating alkoxy groups showed longer fluorescence‐maximum peaks when compared to the polymers that contained the electron‐withdrawing fluoroalkyl groups. However, such an effect of the substituent on the absorption property was not clearly seen. The emission bands of the solid films did not show any significant red shift, relative to that of the dilute solution.

     

X-ray crystallographic structure and physical properties of the pentacoordinated [TPAFeCl] complex

A new pentacoordinated ferrous compound [TPAFeCl]⁺ (TPA = tris(2-pyridylmethyl)amine) was synthesized from the reaction between H₃TPA(ClO₄)₃ and Fe(PⁿPr₃)₂Cl₂ in MeCN. The unique trigonal bipyramidal [TPAFeCl]⁺ complex was characterized as a S = 2 high spin complex based on the crystallographic structure, magnetic susceptibility, ¹H NMR spectrum and semi-empirical ZINDO/S calculations. Crystal of [TPAFeCl]₂(FeCl₄)(MeCN)₂ was monoclinic with a = 12.019(2) Å, b = 27.550(5) Å, c = 14.138(2) Å, β = 94.168(3)°, V = 4668.9(13) Å³, space group C/c, and the unit cell contained a racemic mixture of Δ and Λ isomers with ferrous tetrachloride anion.     

Importance of membrane selection in the development of immunochromatographic assays for low-molecular weight compounds

This study was performed to demonstrate the importance of selecting an appropriate membrane when developing immunochromatographic assays (ICAs) for the sensitive detection of low-molecular weight compounds. Based on our findings, we propose a theoretical basis for selecting such a membrane. When eluting the sample solution for the competitive ICA using colloidal gold label for low-molecular analytes, the degree of binding inhibition is proportional to the collision frequency between the antibody-colloidal gold (Ab–CG) and analyte before Ab–CG binding to the capture antigen and a higher concentration of pesticides around the Ab–CG leads to a greater degree of inhibition. Therefore, we propose that the relative migration speed of the analyte and Ab–CG on the test strip is critically important for selecting a membrane in the development of sensitive competitive ICAs. We developed a novel method to estimate such a relative migration speed. We demonstrated the applicability of this proposal by using it to select an appropriate membrane for the development of an ICA of the pesticide diazinon.     

Continuous countercurrent extraction of hemicellulose from pretreated wood residues

Two-stage dilute acid pretreatment followed by enzymatic cellulose hydrolysisis an effectivemethod for obtaining high sugar yields from wood residuessuchassoftwood forest thinnings. In the first-stage hydrolysis step, most of the hemicellulose is solubilized using relatively mild conditions. The soluble hemicellu losic sugars are recovered from the hydrolysateslurry by washing with water. The washed solids are then subjected tomoresevere hydrolysis conditions to hydrolyze approx 50% of the cellulose to glucose. The remaining cellulose can further be hydrolyzed with cellulase enzyme. Our process simulation indicates that the amount of water used in the hemicellulose recovery step has a significan tim pact on the cost of ethanol production. It is important to keep water usage as low as possible while mainta ining relatively high recovery of solublesugars. To achieve this objective, a prototype pilot-scale continuous countercurrent screw extractor was evaluated for the recovery of hemicellulose from pretreated forest thinnings. Using the 274-cm (9-ft) long extractor, solubles recoveries of 98, 91, and 77% were obtained with liquid-to-insoluble solids (L/1S) ratios of 5.6, 3.4, and 2.1, respectively. An empirical equation was developed to predict the performance of the screwextractor. This equation predicts that soluble sugar recovery above 95% can be obtained with an L/IS ratio as low as 3.0.     

Photocatalytic Effects of Rutile Phase TiO2 Ultrafine Powder with High Specific Surface Area Obtained by a Homogeneous Precipitation Process at Low Temperatures

The photocatalytic characteristics of nanostructured TiO₂ ultrafine powder with rutile phase produced using the homogeneous precipitation process at low temperatures (HPPLT) were compared with those of commercial P-25 TiO₂ powder by flame hydrolysis. The TiO₂ powder by the HPPLT showed much higher photoactivity in the removal rate, showing lower pH values in the solution than the P-25 powder when eliminating metal ions such as Pb and Cu from the aqueous metal-EDTA solutions. This can be inferred as the more rapid photo-oxidation or -reduction of metal ions from the aqueous solution, together with relatively higher efficiencies in the use of an electron-hole pair formed on the surface of the TiO₂ particles under UV light irradiation. Also, in the view of the TiO₂ particle morphology, compared to the well-dispersed spherical P-25 particles, the agglomerated TiO₂ secondary particles by the HPPLT consist of acicular typed primary particles with a thickness in the range of 3–7 nm and the primary particles radialize in all directions, which would be more effective to photocatalytic reactions without the large electron-hole recombination on the surface of the TiO₂ particle under UV light irradiation. It can be, therefore, thought that the higher photoactivity of the rutile TiO₂ powder by the HPPLT in the aqueous solutions results mainly from having a larger surface area by the acicular shaped primary particles with very thin thickness and radialization in all directions.     

Characteristic profiles of the inclusion complex of omeprazole/peracylated-β-cyclodextrin formed in supercritical carbon dioxide

Inclusion properties of the drug omeprazole (OMP) with peracetylated-beta-cyclodextrin (PAc-β-CD) prepared by green method, following supercritical carbon-dioxide (scCO₂), were characterized through thermal (TGA and DSC), crystalline (XRD), NMR spectroscopic and dissolution studies. Comparison amongst PAc-β-CD, OMP, physical binary mixture (equimolar ratio of OMP: PAc-β-CD) and the solid inclusion complex (OMP/PAc-β-CD) revealed scCO₂ as a successful technique for inclusion complex formation as well, identified characteristics performances of PAc-β-CD/OMP interactions. For instance, absence of characteristic DSC or XRD peaks of either chemical in the complex was quite noticeable with the shift of proton peaks in ¹H NMR spectra. The formed inclusion complex also showed an important dissolution performance of OMP for controlled release applications partly due to the hydrophobic nature of PAc-β-CD.     

Synthesis of ZnO nanorods and their application in quantum dot sensitized solar cells

ZnO nanorod thin films of different thicknesses and CdS quantum dots have been prepared by chemical method. X-ray diffraction pattern reveals that the CdS quantum dot and ZnO nanorods are of hexagonal structure. Field emission scanning electron microscope images show that the diameter of hexagonal shaped ZnO nanorods ranges from 110 to 200 nm and the length of the nanorod vary from 1.3 to 4.7 μm. CdS quantum dots with average size of 4 nm have been deposited onto ZnO nanorod surface using successive ionic layer adsorption and reaction method and the assembly of CdS quantum dot with ZnO nanorod has been used as photo-electrode in quantum dot sensitized solar cells. The efficiency of the fabricated CdS quantum dot-sensitized ZnO nanorod-based solar cell is 1.10 % and is the best efficiency reported so far for this type of solar cells.