Solid Fabry-Perot etalons for X-rays

Solid Fabry-Perot etalons for X-rays have been constructed using sputter deposition techniques, each etalon consisting of two Layered Synthetic Microstructures (LSM) Bragg diffraction structures separated by a carbon spacer. The individual LS mirrors contain fifteen tungsten layers (t_w = 8.5 Å) separated by carbon layers (t_c = 19.1 Å. The thick carbon spacers act as resonant cavities; for the structures reported on here the spacer thicknesses, t_sp, are 496.6 Å and 981 Å. The structures were characterized at grazing incidence in reflection using Cu Kα (λ = 1.5418 Å) radiation. The measured response of the etalons agrees well with calculation. Observed reflection efficiencies for Cu K_α were approximately 50 percent of that calculated. This discrepancy is believed to be the result of the interfacial roughness (～3.25 Å) between component layers and the sensitivity of the etalon response to the divergence of the incident X-ray beam.     

Spectrophotometric determination of nitrite with p-nitroaniline and 2-methyl-8-quinolinol in hexadecyl-trimethylammonium bromide solution

Nitrite ion at low concentrations is determined spectrophotometrically by diazotization of p-nitroaniline and coupling of the diazonium salt with 2-methyl-8-quinolinol. The resulting dye is solubilized in hexadecyltrimethylammonium bromide micelles. The molar absorptivity is 4.72 × 10⁴ l mol^-1 cm^-1, and the Sandell sensitivity is 9.7 × 10^-4 μg cm^-2. Some interferences are reported, and preconcentration by evaporation is evaluated. The solubility of hexadecyltrimethylammonium bromide in water was determined as a function of temperature; the Krafft point is 19.6°C. Salting-in of the surfactant by potassium nitrate is described.     

Vectorial Approach to Fast Correlation Attacks

A new, vectorial approach to fast correlation attacks on binary memoryless combiners is proposed. Instead of individual input sequences or their linear combinations, the new attack is targeting subsets of input sequences as a whole thus exploiting the full correlation between the chosen subset and the output sequence. In particular, the set of all the input sequences can be chosen as the target. The attack is based on a novel iterative probabilistic algorithm which is also applicable to general memoryless combiners over finite fields or finite rings. To illustrate the effectiveness of the introduced approach, experimental results obtained for random balanced combining functions are presentedMost of this work was done while he was with Rome CryptoDesign Center, Gemplus, Italy     

Vicinal diester dianions. Annelation with allylic and benzylic αω-dihalides. Synthesis of tricyclobuta[1,2:3,4:6,7]naphthalene

A new method of annelation utilizing the reaction of vicinal diester dianions with allylic and benzylic α,ω-dihalidesis described. The synthesis of tricyclobuta-[1,2:3,4:6,7] naphthalene is reported.     

Stationary values of the ratio of quadratic forms subject to linear constraints

Sommario SiaA una matrice reale simmetrica di ordinen, B una matrice reale simmetrica di ordinen per cuix ^T B x>0 eC una matricen×p di rangor conrp. Si vogliono deteminare i vettorix per cui, JIMELè stazionaria eC ^T x= è il vettore nullo. È dato un algoritmo per generare un autosistema simmetrico i cui autovalori sono i valori stazionarì e per determinare i vettorix. Sono altresì presentate parecchie applicazioni dell'algoritmo.

---

---

Dedicated to Professor L. Collatz on his sixtieth birthday

---

This author was in part supported by the Atomic Energy Commission.     

Enhancement of high harmonics generated by field steering of electrons in a two-color orthogonally polarized laser field

We demonstrate enhancement by 1 order of magnitude of the high-order harmonics generated in argon by combining a fundamental field at 1300 nm (10(14) W cm(-2)) and its orthogonally polarized second harmonic at 650 nm (2 × 10(13) W cm(-2)) and by controlling the relative phase between them. This extends earlier work by ensuring that the main effect is the combined field steering the electron trajectory with negligible contribution from multiphoton effects compared to the previous schemes with 800/400 nm fields. We access a broad energy range of harmonics (from 20 eV to 80 eV) at a low laser intensity (far below the ionization saturation limit) and observe deep modulation of the harmonic yield with a period of π in the relative phase. Strong field theoretical analysis reveals that this is principally due to the steering of the recolliding electron wave packet by the two-color field. Our modeling also shows that the atto chirp can be controlled, leading to production of shorter pulses.     

On the linear dependence of 13C spin polarization parameters

The Jahn-Teller (J-T) effect in systems of four-fold symmetry is well known to differ from that in all other point groups with respect to the nature of the J-T active normal modes of vibration. The present report addresses some previously unnoticed features which are of intrinsic importance in recognizing and understanding the unique manifestations of quadrate symmetry in both the static and dynamic Jahn-Teller effects. We first consider the nature of the static J-T potential surfaces when coupling to and strains in two modes, b ₁ and b ₂, are included in the hamiltonian.

The second part of this paper is devoted to an examination of the dynamic J-T effect in four-fold systems. Utilizing both perturbation theory and numerical solution to the Schrödinger equation, we examine the spin-hamiltonian parameters for a metalloporphyrin ³ E_u triplet state and discuss some dynamical processes, including reorientation of the system between minima, spin-lattice relaxation, and the dependences of these phenomena on the nature and magnitude of the off-diagonal terms in the hamiltonian. There emerge from this analysis several signal differences between the Jahn-Teller effect for a doubly degenerate state in four-fold systems and in the more usual cubic or tetrahedral situation.     

Patterned polyfluorene surfaces by functionalization of nanoimprinted polymeric features

A new procedure is described for surface grafting polymer brushes by step-growth polymerization from initiator-embedded polymeric thin films and micron- and nanometer-scale patterns. An imprint lithographic process, nanocontact molding, was used to prepare thin patterned cross-linked polyacrylate network films on silicon wafers that incorporated 4-bromostyrene in the networks. These networks present reactive 4-bromophenyl functionality at the surface that act as attachment sites for the subsequent Ni(0)- mediated step-growth condensation polymerization of 2,7-dibromo-9,9-dihexylfluorene The step-growth polymerization medium consisted of 2,7-dibromo-9,9-dihexylfluorene, Ni(0)-catalyst, and bipyridine in a toluene/dimethylformamide solvent mixture. The resulting growth of polydihexylfluorene brushes from the patterned surface was monitored by contact angle, optical spectrometry, surface profilometry and AFM. Brush growth was conducted from patterned features ranging from 100 microm to 100 nm in width and 50 nm in height. The optical and fluorescence behavior of the polyfluorene brushes was similar to that of thin polyfluorene films made by spin coating.     

Fusion around the barrier for 7Li+12C

Fusion cross-sections for the ⁷Li + ¹²C reaction have been measured at energies above the Coulomb barrier by the direct detection of evaporation residues. The heavy evaporation residues with energies below 3 MeV could not be separated out from the α-particles in the spectrum and hence their contribution was estimated using statistical model calculations. The present work indicates that suppression of fusion cross-sections due to the breakup of ⁷Li may not be significant for ⁷Li + ¹²C reaction at energies around the barrier.