Electron cyclotron resonance heating in a short cylindrical plasma system

Electron cyclotron resonance (ECR) plasma is produced and studied in a small cylindrical system. Microwave power is delivered by a CW magnetron at 2.45 GHz in TE¹⁰ mode and launched radially to have extraordinary (X) wave in plasma. The axial magnetic field required for ECR in the system is such that the first two ECR surfaces (B = 875.0 G andB = 437.5 G) reside in the system. ECR plasma is produced with hydrogen with typical plasma density n^e as 3.2 × 10¹⁰ cm^-3 and plasma temperature T^e between 9 and 15 eV. Various cut-off and resonance positions are identified in the plasma system. ECR heating (ECRH) of the plasma is observed experimentally. This heating is because of the mode conversion of X-wave to electron Bernstein wave (EBW) at the upper hybrid resonance (UHR) layer. The power mode conversion efficiency is estimated to be 0.85 for this system. The experimental results are presented in this paper.     

Normal modes and quality factors of spherical dielectric resonators: I — shielded dielectric sphere

Electromagnetic theoretic analysis of shielded homogeneous and isotropic dielectric spheres has been made. Characteristic equations for the TE and TM modes have been derived. Dielectric spheres of radii of the order of μm size are found suitable for the optical frequency region whereas for the microwave region radii of the order of mm size are found suitable. Parameters suitable for their application in the optical and microwave frequency ranges have been used to compute the frequencies corresponding to the normal modes for the TE and TM modes. Expressions for the quality factors for realistic resonators, i.e., for a dielectric sphere with a non-zero conductivity and a metal shield with a finite conductivity have also been derived for the TE and TM modes. Computations of the quality factors have been made for resonators with parameters suitable for the optical and the microwave regions.     

Effect of NaClO4 concentration on electrolytic behaviour of corn starch film for supercapacitor application

Polymer electrolyte has seen tremendous growth after works of Fenton & Armand, and energy devices are being produced at commercial level. Today’s social lifestyle needs miniaturized energy devices at every step of life; consequently, they add up to chemical garbage of the world. The sustainable development in the field needs eco-friendly energy devices. Hence, starch (being at low cost, abundant in nature and eco-friendly) has received great scientific attention. In recent past, many attempts have been made to modify the various starches to get fast ion-conducting materials. In our laboratory, also, wheat, potato, rice and arrowroot starches have been modified with different sodium salts, and in each case, considerably high-conducting (>10⁻³ S/cm) films have been found. In present case, also, a high-conducting transparent film (10⁻² S/cm) is obtained with corn starch and NaClO₄ salt after being crosslinked with glutaraldehyde (GA). Bode plots (both phase and magnitude), capacitive-response plot, capacitive-frequency plots and linear sweep voltammetry curves are analysed to explain the possibility of using the prepared electrolyte in capacitive device. The larger electrochemical stability window (ESW) ~ 2.4 V and smaller ion relaxation time ~ 65 μs make it a potential candidate for device fabrication. The equivalent series resistance is ~6.252 Ω for 0.8-mm-thick sample.

     

Some Bianchi Type III String Cosmological Models with Bulk Viscosity

We investigate the integrability of cosmic strings in Bianchi III space-time in presence of a bulk viscous fluid by applying a new technique. The behavior of the model is reduced to the solution of a single second order nonlinear differential equation. We show that this equation admits an infinite family of solutions. Some physical consequences from these results are also discussed.     

Magnetoelectric characterization of xNi0.75Co0.25Fe2O4-(1−x)BiFeO3 nanocomposites

Magnetoelectric (ME) nanocomposites containing Ni_0.75Co_0.25Fe₂O₄-BiFeO₃ phases were prepared by citrate sol-gel process. X-ray diffraction (XRD) analysis showed phase formation of xNi_0.75Co_0.25Fe₂O₄-(1−x)BiFeO₃ (x=0.1, 0.2, 0.3 and 0.4) composites on heating at 700 °C. Transmission electron microscopy revealed the formation of powders of nano order size and the crystal size was found to vary from 30 to 85 nm. Dispersion in dielectric constant (ε) and dielectric loss (tan δ) in the low-frequency range have been observed. It is seen that nanocomposites exhibit strong magnetic properties and a large ME effect. On increasing Ni_0.75Co_0.25Fe₂O₄ contents in the nanocomposites, the saturation magnetization (M_S) and coercivity (H_C) increased after annealing at 700 °C. The large ME output in the nanocomposites exhibits strong dependence on magnetic bias and magnetic field frequency. The large value of ME output can be attributed to small grain size of ferrite phase of nanocomposite being prepared by citrate precursor process.     

Synthesis of C–N nanotube blocks and Y-junctions in bamboo-like C–N nanotubes

We report the observations made on the synthesis and characterization of C–N nanotube blocks and Y-junctions in bamboo-like C–N nanotubes. The C–N nanotube Blocks have been synthesized by pyrolyzing the mixture of silver nitrate acetonitrile solution and ferrocene benzene solution. The structural/microstructural characterization of the as-synthesized material has been done using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). X-ray photoelectron spectroscopic (XPS) analysis has been carried out to confirm the presence of nitrogen in nanotubes. These investigations reveal the formation of blocks of bamboo-like nanotubes having the dimension 300 × 200 × 30 μm and the diameter is 20–50 nm. We also observe the formation of Y-junctions in bamboo-like nanotubes as we spray the acetonitrile ferrocene and AgNO₃ mixture. The length of the synthesized Y-junction nanotube bundles is ~2 μm. Some more complex Ψ-shaped junctions are also found to be present. The diameters of the Y-junction nanotubes is ~80 nm at the junction and 25–50 nm at the branches.     

Synthesis and Characterization of Dichlorotin(IV)trithiophosphates and Their Adducts with Nitrogen Donor Bases

Abstract

Dichlorotin(IV)trithiophosphates [(RO)P(S)S ₂ ]SnCl ₂ were prepared by the reaction of methanolic solution of SnCl ₄ and dipotassium salt of trithiophosphates in a 1:1 molar ratio and their adducts [(RO)P(S)S ₂ ]SnCl _2.N ₂ C ₁₂ H ₈ and [(RO)P(S)S ₂ ]SnCl _2.N ₂ C ₁₀ H ₈ were prepared by the reaction of methanolic solution of [(RO)P(S)S ₂ ]SnCl ₂ and N-donor bases in a 1:1 molar ratio. These newly synthesised derivatives have been characterized by elemental analysis; molecular weight measurements; and IR, ¹³ C, ³¹ p and ¹¹⁹ Sn NMR spectral studies. Coordination number of four and six was suggested for dichlorotin (IV)trithiophosphates and their adducts with N-donor bases respectively.     

Solvent-Free Conversion of N,N-Dimethylhydrazones to Nitriles Under Microwave Irradiation

A variety of aldehyde N,N-dimethylhydrazones are rapidly converted into the corresponding nitriles using oxone supported on wet Al₂O₃ under microwave irradiation in dry media.     

Zinc-Mediated Facile and Efficient Chemoselective S-Alkylation of 5-Aryl-1,3,4-oxadiazole-2-thiols in the Absence of Base

Zinc-mediated facile and efficient chemoselective S-alkylation of 5-aryl 1,3,4-oxadiazole-2-thiols in the presence of a catalytic amount of tetra butyl ammonium iodide was described. The reaction was performed under neutral conditions. The chemoselectivity of the alkylation was confirmed by NMR spectroscopy and x-ray crystallography.