A New Trend on Biosensor for Neurotransmitter Choline/Acetylcholine—an Overview

Technology always has been an indispensible part in the development of biosensors. The performance of biosensors is being tremendously improved using new materials as transducer as well as binding material in their construction. The use of new materials allowed innovation on transduction technology in biosensor preparations. Because of the submicron dimensions of these sensors, simple and rapid analyses in vitro as well as in vivo are now possible. Portable instruments capable of analysing multiple components are becoming available, too. Sensors that provide excellent temporal and spatial resolution for in vivo monitoring such as for measurement of neurotransmitters have become prominent. The interest to improve the stability, sensitivity and selectivity of the sensors is paramount. This study tries to give an overview of the present status of the material-based biosensor design and new generation of choline/acetylcholine neurotransmitter biosensors.     

UV-absorption and fluorimetric methods for the determination of alprazolam in pharmaceutical formulation

The development of UV and fluorescence spectrophotometric methods for the quantitative determination of alprazolam in dosage forms using As(III)?SDS system. The two simple and sensitive, spectrophotometric and spectrofluorimetric methods were developed for the determination of alprazolam (ALP) in tablets. These methods are based on formation of ALP?As(III) complex in the presence of SDS. The UV-spectrum of 30% methanolic solution of ALP (5 × 10^?5 M) at pH 6.5 (Mclivaine buffer) was run between 200 and 380 nm. The absorption spectrum of ALP exhibits two peaks with a λ_max. at 255 nm and a weak band at 325 nm. When the spectra of the drug were run at varying pH in the region 200–380 nm, one isosbestic point at 290 nm was observed, which indicated the presence of two ionic conditions in solution. The complex exhibited an absorption maximum at 265 nm and emission peak at 520 nm with respect to the excitation wavelength of 325 nm. The spectrophotometric method was found to be linear in 8.0–17.0 μg ml^?1 range with detection limit of 13.520 μg ml^?1, while 0.05–9.5 μg ml^?1 range was with detection limit of 1.048 × 10^?2 μg ml^?1 by spectrofluorimetric method. The mean percentage recovery of the added quantity was found to be 99.54 (spectrophotometric method) and 100.22 (spectrofluorimetric method) and the %RSD are lower than 0.478 and 0.296 determined spectrophotomerically and spectrofluorimtrically, respectively. This indicates that the proposed method is accurate. The apparent ionization constant of ALP was found to be 9.29. The spectra, experimental conditions were set followed by determination stoichiometry, stability constant and thermodynamic parameters of the As(III), Co(II), Ni(II), and Zn(II) complexes with ALP at pH 6.5. The proposed methods have been successfully applied to the assay of ALP in tablets and the results were statistically evaluated.     

Probing dynamic generation of hot-spots in self-assembled chains of gold nanorods by surface-enhanced Raman scattering

Further progress in the applications of self-assembled nanostructures critically depends on developing a fundamental understanding of the relation between the properties of nanoparticle ensembles and their time-dependent structural characteristics. Following dynamic generation of hot-spots in the self-assembled chains of gold nanorods, we established a direct correlation between ensemble-averaged surface-enhanced Raman scattering and extinction properties of the chains. Experimental results were supported with comprehensive finite-difference time-domain simulations. The established relationship between the structure of nanorod ensembles and their optical properties provides the basis for creating dynamic, solution-based, plasmonic platforms that can be utilized in applications ranging from sensing to nanoelectronics.     

Study of the base-catalysed oxidation of the anti-bacterial and anti-protozoal agent metronidazole by permanganate ion in alkaline medium

The mechanism of dismutation of MnO₄ ^2? via the complex [MTZ–MnO₄·OH]^2?, formed during the oxidation of metronidazole (MTZ), has been investigated spectrophotometrically at different temperatures. The stoichiometry of the reaction is 1:1, i.e. 1 mol MTZ reacts with 1 mol Mn(VII).The reaction is first order in permanganate, less than first order in [MTZ] and [alkali]. The effects of added products and the dielectric constant and ionic strength of the reaction medium were investigated. The main products were identified by spot test and FT-IR. A mechanism involving a free radical has been proposed. In the equilibrium step MTZ binds to the MnO₄ ^? species to form a complex (C). Investigation of the reaction at different temperatures enabled determination of the activation data for the slow step of proposed mechanism. The proposed mechanism and the derived rate laws are consistent with the observed kinetics.     

Application of microwave heating for the fast extraction of fat content from the poultry feeds

A rapid method has been developed to extract and quantitatively measure the total oil content in poultry feeds using a domestic microwave oven. The optimized extraction procedure involves the replicate (6×) extraction of 5 g of ground feed with 12 ml of hexane for 20 s in a 900 W oven. Each replicate involves the collection of the resulting miscella and its replacement with fresh solvent for re-extraction. The collected extracts were centrifuged and transferred to a vial. The solvent was evaporated to a constant weight and the residual lipid weighed. In comparison to conventional Soxhlet extraction method, lipid contents obtained using the optimized microwave procedure was not significantly different. However, FTIR analysis indicated that the microwave procedure was superior in minimizing the formation of free fatty acids (FFA) relative to the Soxhlet procedure if the temperature of the sample was kept within the range of 45–50 °C. This simple, sequential extraction procedure is rapid, highly efficient and provides a simple mean of quantitating the lipid content of poultry feed in less than 40 min without the need for specialized microwave oven.     

High-Current Capable and Non-Flammable Protic Organic Electrolyte for Rechargeable Zn Batteries

Rechargeable Zinc batteries (RZBs) are considered a potent competitor for next-generation electrochemical devices, due to their multiple advantages. Nevertheless, traditional aqueous electrolytes may cause serious hazards to long-term battery cycling through fast capacity fading and poor Coulombic efficiency (CE), which happens due to complex reaction kinetics in aqueous systems. Herein, we proposed the novel adoption of the protic amide solvent, N-methyl formamide (NMF) as a Zinc battery electrolyte, which possesses a high dielectric constant and high flash point to promote fast kinetics and battery safety simultaneously. Dendrite-free and granular Zn deposition in Zn-NMF electrolyte assures ultra-long lifespan of 2000 h at 2.0 mA cm⁻²/2.0 mAh cm⁻², high CE of 99.57 %, wide electrochemical window (≈3.43 V vs. Zn²⁺/Zn), and outstanding durability up to 10.0 mAh cm⁻². This work sheds light on the efficient performance of the protic non-aqueous electrolyte, which will open new opportunities to promote safe and energy-dense RZBs.     

Synthesis of Sheet Like Nanostructures of NiO Using Potassium Dichromate as Surface Modifying Agent for the Sensitive and Selective Determination of Amlodipine Besylate (ADB) Drug

The monitoring of hypertension drugs is very critical and important to sustain a healthy life. In this study, we have synthesized nickel oxide (NiO) nanostructures using potassium dichromate as surface modifying agent by hydrothermal method. These NiO nanostructures were found highly active for the oxidation of ADB besylate (ADB). The unit cell structure and morphology were investigated by scanning electron microscopy (SEM) and powder X-ray diffraction (XRD) techniques. The SEM study has confirmed the nano sheet like morphology and XRD analysis has described the cubic unit arrays of NiO. After the physical characterization, NiO nanostructures were used to modify the surface of glassy carbon electrode (GCE) by drop casting method. Then cyclic voltammetry (CV) was used to characterize the electrochemical activity of NiO nanostructures in the0.1 M phosphate buffer solution of pH 10.0 and a well resolved oxidation peak was identified at 0.70 V. The linear range for the NiO nanostructures was observed from 20–90 nM with a regression coefficient of 0.99 using CV. The calculated limit of detection (LOD) was 2.125 nM and the limit of quantification (LOQ) was 4.08 nM. Further to validate the CV calibration plot, an amperometry experiment was performed on the NiO nanostructures and sensors exhibited a linear range of 10 nM to 115 nM with LOD of 1.15 nM. The proposed approach was successfully used for the determination of ADB from commercial tablets and it reveals that the sensor could be capitalized to monitor ADB concentrations from pharmaceutical products. The use of potassium dichromate as a surface modifying agent for the metal oxide nanostructures may be of great interest to manipulate their crystal and surface properties for the extended range of biomedical and energy related applications.     

单个铂酞菁分子在正负偏压激发下的电致发光特性研究

本文利用扫描隧道显微镜诱导发光技术,系统地研究了铂酞菁分子在正负偏压激发下的电致发光行为及其相关的电子激发机制. 铂酞菁分子在正负偏压激发下均可以发光,但发光特征有所不同. 在负偏压激发下,观察到了源于中性PtPc分子LUMO→HOMO跃迁的峰位在637 nm处的荧光峰. 荧光强度在三个不同的激发区域呈阶梯状增加. 当激发偏压处于区域(I)时,可以产生较强的荧光,其主导激发机制是载流子注入激发机制;当激发偏压处于区域(II)时,可以产生中等发光强度的荧光,其主导激发机制是非弹性电子散射激发机制;当激发偏压处于区域(III)时,激发电子能量小于荧光光子能量,存在上转换现象,荧光峰非常弱,其激发过程需要自旋三重态作为中继态,并由载流子注入和非弹性电子散射两种机制共同作用产生. 在正偏压激发下,分子的电致发光光谱特征变得更加复杂,具有多个发光峰. 911 nm处的尖锐发光峰起源于PtPc^-阴离子的LUMO+1→LUMO跃迁,其激发主要是由载流子注入激发机制主导.     

Effective separation and simultaneous analysis of anabolic androgenic steroids (AAS) in their pharmaceutical formulations by a validated TLC-densitometry method

ABSTRACT: A TLC densitometric method was developed for simultaneous determination of four anabolic androgenic steroids (AAS) of testosterone derivatives including testosterone propionate (TP), testosterone phenyl propionate (TPP), testosterone isocaproate (TI) and testosterone deaconate (TD) in their pharmaceutical products. Separation was carried out on Al based TLC plates, pre-coated with silica gel 60F-254 using hexane and ethyl acetate (8.5:1.5, v/v). Spots at Rf 0.31+/-0.01, 0.34+/-0.01, 0.40+/-0.01 and 0.45+/-0.02 were recognized as TPP, TP, TI and TD, respectively. Quantitative analysis was done by densitometric measurements at lambdamax 251 nm for all derivatives. The developed method was validated as per ICH guidelines. Method was found linear over the concentration range of 200-1200 ng/spot with the correlation coefficient of 0.995, 0.993, 0.995 and 0.996 for TP, TPP, TI, TD, respectively. Limit of detection for all derivatives were in the range of 16.7-22.3 ng/spot while limit of quantitation were found to be in the range of 55.7-70.9 ng/spot. The developed TLC method can be applied for the simultaneous routine analysis of testosterone derivatives in their individual and combined pharmaceutical formulations.