Quantitative analysis of urinary glycerol levels for doping control purposes using gas chromatography-mass spectrometry

The administration of glycerol to endurance athletes results in an increased fluid retention and improved performance, particularly under hot and humid conditions. Consequently, glycerol is considered relevant for sports drug testing and methods for its detection in urine specimens are required. A major issue in this regard is the natural occurrence of trace amounts of glycerol in human urine, which necessitates a quantitative analysis and the determination of normal urinary glycerol levels under various sporting conditions. A quantitative method was established using a gas chromatography/isotope-dilution mass spectrometry-based approach that was validated with regard to lower limit of detection (0.3 microg mL(-1)), lower limit of quantification (0.9 microg mL(-1)), specificity, linearity (1.0-98.0 microg mL(-1)), intraday and interday precision (<20% at 2.4, 24.1 and 48.2 microg mL(-1)) as well as accuracy (92-110%). Sample aliquots of 20 microL were enriched with five-fold deuterated glycerol, dried and derivatised using N-methyl-trimethylsilyltrifluoroacetamide (MSTFA) before analysis. The established method was applied to a total of 1039 doping control samples covering various sport disciplines (349 endurance samples, 286 strength sport samples, 325 game sport samples and 79 other samples) in- and out-of-competition, which provided quantitative information about the glycerol content commonly observed in elite athletes' urine samples. About 85% of all specimens yielded glycerol concentrations < 20.0 microg mL(-1) and few reached values up to 132.6 microg mL(-1). One further sample, however, was found to contain 2690 microg mL(-1), which might indicate the misuse of glycerol, but no threshold for urinary glycerol concentrations has been established yet due to the lack of substantial data. Based on the results obtained from the studied reference population, a threshold for glycerol levels in urine set at 200 microg mL(-1) is suggested, which provides a tool to doping control laboratories to test for the misuse of this agent in elite and amateur sport.     

Structure-transport analysis for particulate packings in trapezoidal microchip separation channels

This article investigates the efficiency of particulate beds confined in quadrilateral microchannels by analyzing the three-dimensional fluid flow velocity field and accompanying hydrodynamic dispersion with quantitative numerical simulation methods. Random-close packings of uniform, solid (impermeable), spherical particles of diameter d(p) were generated by a modified Jodrey-Tory algorithm in eighteen different conduits with quadratic, rectangular, or trapezoidal cross-section at an average bed porosity (interparticle void fraction) of epsilon = 0.48. Velocity fields were calculated by the lattice Boltzmann method, and axial hydrodynamic dispersion of an inert tracer was simulated at Péclet numbers Pe = u(av)d(p)/D(m) (where u(av) is the average fluid flow velocity through a packing and D(m) the bulk molecular diffusion coefficient) from Pe = 5 to Pe = 30 by a Lagrangian particle-tracking method. All conduits had a cross-sectional area of 100d(p)(2) and a length of 1200d(p), translating to around 10(5) particles per packing. We present lateral porosity distribution functions and analyze fluid flow profiles and velocity distribution functions with respect to the base angle and the aspect ratio of the lateral dimensions of the different conduits. We demonstrate significant differences between the top and bottom parts of trapezoidal packings in their lateral porosity and velocity distribution functions, and show that these differences increase with decreasing base angle and increasing base-aspect ratio of a trapezoidal conduit, i.e., with increasing deviation from regular rectangular geometry. Efficiencies are investigated in terms of the axial hydrodynamic dispersion coefficients as a function of the base angle and base-aspect ratio of the conduits. The presented data support the conclusion that the efficiency of particulate beds in trapezoidal microchannels strongly depends on the lateral dimensions of the conduit and that cross-sectional designs based on large side-aspect-ratio rectangles with limited deviations from orthogonality are favorable.     

Optimized and far-red-emitting variants of fluorescent protein eqFP611

Fluorescent proteins (FPs) emitting in the far-red region of the spectrum are highly advantageous for whole-body imaging applications because scattering and absorption of long-wavelength light is markedly reduced in tissue. We characterized variants of the red fluorescent protein eqFP611 with bright fluorescence emission shifted up to 639 nm. The additional red shift is caused by a trans-cis isomerization of the chromophore. The equilibrium between the trans and cis conformations is strongly influenced by amino acid residues 143 and 158. Pseudo monomeric tags were obtained by further genetic engineering. For the red chromophores of eqFP611 variants, molar extinction coefficients of up to approximately 150,000 were determined by an approach that is not affected by the presence of molecules with nonfunctional red chromophores. The bright fluorescence makes the red-shifted eqFP611 variants promising lead structures for the development of near-infrared fluorescent markers. The red fluorescent proteins performed well in cell biological applications, including two-photon imaging.     

Correlation between the molecular structure and photoresponse in aliphatic self-assembled monolayers with azobenzene tailgroups

We have compared the structural and photoisomerization properties of self-assembled monolayers (SAMs) comprising either the trans or cis isomers of azobenzene terminated dithiolane with in-chain amide unit, viz., 4-(phenyldiazenyl)phenyl-4-(1,2-dithiolane-3-yl)-butylcarboxamide ( 1). These films were prepared on Au(111) from solutions of both isomers. Structure and composition of the SAMs were studied by X-ray photoelectron spectroscopy and near-edge X-ray absorption fine structure spectroscopy. The photoresponse of the films was monitored in real time by ellipsometry. SAMs fabricated from the trans isomer were found to be densely packed and highly ordered. These films did not show any discernible photoresponse upon irradiation with UV light, which, under favorable conditions, triggers the trans- cis isomerization. In contrast, films prepared from solutions containing predominantly the cis isomer were loosely packed and mostly disordered but exhibited reversible photoreactivity. The results confirm that steric effects, i.e., available free volume, play a dominant role for the photoresponse of aliphatic SAMs bearing the photoactive azobenzene group. The crystal structure of 1 ( trans isomer) exhibits a row-like aggregation of neighboring molecules by weak hydrogen bonds and can be taken as a model for the arrangement of 1 in the monolayer films. Further, in addition to the surface coordination behavior, we have also mimicked the chemisorption of the 1,2-dithiolane moiety onto the gold substrate in molecular coordination chemistry in oxidative addition reactions with the zero-valent platinum complex [Pt(PPh 3) 4].     

Striped phase of mercaptoalkylferrocenes on Au(111) with a potential for nanoscale surface patterning

The molecular structure of submonolayer-coverage phases of 3-(thioacetyl)-propanoylferrocene and 5-ferrocenylpentanethiol in mixed layers with alkanethiols on Au(111) was resolved by scanning tunneling microscopy. The ferrocenes formed a striped surface phase, similar to the lying-down structures of alkanethiols, resulting in equally spaced rows of the ferrocene moieties. The obtained nanoscale lattice of functional groups on the surface offers an interesting potential for the patterning of small, periodic structures with precise distance control via a hydrocarbon spacer.     

Toward [18F]-labeled aryltrifluoroborate radiotracers: in vivo positron emission tomography imaging of stable aryltrifluoroborate clearance in mice

The use of a boronic ester as a captor of aqueous [(18)F]-fluoride has been previously suggested as a means of labeling biomolecules in one step for positron emission tomography (PET) imaging. For this approach to be seriously considered, the [(18)F]-labeled trifluoroborate should be humorally stable such that it neither leaches free [(18)F]-fluoride to the bone nor accumulates therein. Herein, we have synthesized a biotinylated boronic ester that is converted to the corresponding trifluoroborate salt in the presence of aqueous [(18)F]-fluoride. In keeping with its in vitro aqueous kinetic stability at pH 7.5, the trifluoroborate appears to clear in vivo quite rapidly to the bladder as the stable trifluoroborate salt with no detectable leaching of free [(18)F]-fluoride to the bone. When this labeled biotin is preincubated with avidin, the pharmacokinetic clearance of the resulting complex is visibly altered. This work validates initial claims that boronic esters are potentially useful as readily labeled precursors to [(18)F]-PET reagents.     

Thin Organic-Inorganic Anti-Fouling Hybrid-Films for Microreactor Components

Deposit formation and fouling in reactors for polymer production and processing especially in microreactors is a well-known phenomenon. Despite the flow and pressure loss optimized static mixers, fouling occurs on the surfaces of the mixer elements. To improve the performance of such parts even further, stainless steel substrates are coated with ultra-thin films which have low surface energy, good adhesion, and high durability. Perfluorinated organosilane (FOTS) films deposited via chemical vapor deposition (CVD) are compared with FOTS containing zirconium oxide sol-gel films regarding the prevention of deposit formation and fouling during polymerization processes in microreactors. Both film structures led to anti-adhesive properties of microreactor component surfaces during aqueous poly(vinylpyrrolidone) (PVP) synthesis. To determine the morphology and surface chemistry of the coatings, different characterization methods such as X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy as well as microscopic methods such as field-emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM) are applied. The surface free energy and wetting properties are analyzed by means of contact angle measurements. The application of thin film-coated mixing elements in a microreactor demonstrates a significant lowering in pressure increase caused by a reduced deposit formation.