Quasinilpotency of the operators in picard-lindelöf iteration

The superlinear convergence of Picard-Lindelöf iteration on finite time intervals is studied by considering the resolvent operator as an operator-valued entire function. The main conclusions of this paper are related to the following fact: the convergence properties of the iteration when applied to a large and sparse system are largely determined by the graph properties of the decomposition and are partly insensitive in terms of the values of the elements of the matrices.     

Adsorption and activity of Thermomyces lanuginosus lipase on hydrophobic and hydrophilic surfaces measured with dual polarization interferometry (DPI) and confocal microscopy

The adsorption and activity of Thermomyces lanuginosus lipase (TLL) was measured with dual polarization interferometry (DPI) and confocal microscopy at a hydrophilic and hydrophobic surface. In the adsorption isotherms, it was evident that TLL both had higher affinity for the hydrophobic surface and adsorbed to a higher adsorbed amount (1.90 mg/m²) compared to the hydrophilic surface (1.40–1.50 mg/m²). The thickness of the adsorbed layer was constant (3.5 nm) on both surfaces at an adsorbed amount >1.0 mg/m², but decreased on the hydrophilic surface at lower surface coverage, which might be explained by partially unfolding of the TLL structure. However, a linear dependence of the refractive index of the adsorbed layer on adsorbed amount of TLL on C18 surfaces indicated that the structure of TLL was similar at low and high surface coverage. The activity of adsorbed TLL was measured towards carboxyfluorescein diacetate (CFDA) in solution, which upon lipase activity formed a fluorescent product. The surface fluorescence intensity increase was measured in a confocal microscope as a function of time after lipase adsorption. It was evident that TLL was more active on the hydrophilic surface, which suggested that a larger fraction of adsorbed TLL molecules were oriented with the active site facing the solution compared to the hydrophobic surface. Moreover, most of the activity remained when the TLL surface coverage decreased. Earlier reports on TLL surface mobility on the same surfaces have found that the lateral diffusion was highest on hydrophilic surfaces and at low surface coverage of TLL. Hence, a high lateral mobility might lead to a longer exposure time of the active site towards solution, thereby increasing the activity against a water-soluble substrate.     

Studies on the exchange of early pellicle proteins by mucin and whole saliva

Adsorption of small pellicle proteins statherin or proline-rich protein 1 (PRP1), respectively, and subsequent adsorption of human whole saliva (HWS) or salivary mucin MUC5B, respectively, was studied using ellipsometry and total internal reflectance fluorescence. Differences in elution (using sodium dodecyl sulphate (SDS) solutions) between mixed and single protein films were also investigated. On both hydrophilic and hydrophobized surfaces HWS and MUC5B were found to adsorb to pre-adsorbed layers of statherin and PRP1, respectively. Statherin adsorption on both substrate types showed no or minor exchange by HWS or MUC5B and no change in SDS elution between mixed and single protein films. Small amounts of PRP1 were exchanged by HWS on both surface types and the SDS elutable fractions were similar or larger for mixed films compared to single protein films. PRP1 and MUC5B in sequence showed minor exchange of PRP1 on hydrophilic surfaces, while no exchange could be established on hydrophobized substrates. SDS elutable fractions decreased for PRP1 and MUC5B mixed films compared to single protein films. In conclusion, minor amounts of statherin and PRP1 are exchanged during the time course of the experiments, which indicates that these proteins may to a large extent remain incorporated in the pellicle.     

Utilization of cascade chemo-bio catalysis for the synthesis of R -1-phenylethyl acetate

Liquid phase tert-butylation of m-cresol was carried out using 12-tungstosilicic acid supported on neutral alumina by varying different parameters. The reaction has also been carried out by using calcined samples under optimized conditions. The present catalyst shows an excellent activity of 93.2%, conversion of 100% selectivity for the o-isomer, an important industrial product.     

Microscopic mechanism for cold denaturation

We elucidate the mechanism of cold denaturation through constant-pressure simulations for a model of hydrophobic molecules in an explicit solvent. We find that the temperature dependence of the hydrophobic effect induces, facilitates, and is the driving force for cold denaturation. The physical mechanism underlying this phenomenon is identified as the destabilization of hydrophobic contact in favor of solvent-separated configurations, the same mechanism seen in pressure-induced denaturation. A phenomenological explanation proposed for the mechanism is suggested as being responsible for cold denaturation in real proteins.     

The base sequence dependent flexibility of linear single-stranded oligoribonucleotides correlates with the reactivity of the phosphodiester bond

The effect of base sequence on the structure and flexibility of linear single-stranded RNA molecules and the influence of the base sequence on phosphodiester bond reactivity have been studied. Molecular dynamics simulations of 2.1 ns were carried out for nine chimeric oligonucleotides containing only one unsubstituted ribo unit, all the rest of sugars being 2'-O-methylated. The base sequence has recently been reported to make a big contribution to the reactivity of these compounds. A detailed examination of the interaction energies between the base moieties shows that base stacking is strongly context-dependent and cooperative. The strength of stacking at the site susceptible to chain cleavage by intramolecular transesterification was observed to be dependent on both the flanking bases of the cleavage site and those further apart in the molecule. The interaction energies between the bases in the vicinity of the scissile linkage were found to correlate well with the experimental phosphodiester bond cleavage rates: the stronger the bases close to the cleavage site are stacked, the slower the cleavage rate is.     

Novel approach to the determination of structurally similar hydroxamate siderophores by column-switching capillary liquid chromatography coupled to mass spectrometry

In this study a new approach to determine three different siderophores (ferrichrome, ferrichrysin, ferricrocin) in natural soil solutions as well as in cultures of fungi is presented. The method includes enrichment of the analytes on a short pre-column, packed with C18 material, and subsequent highly selective separation of the analytes on a capillary porous graphitic carbon (PGC) column. In contrast to normal C18 packing materials, porous graphitic carbon offers chromatographic resolution between the three very similar analytes. The selectivity of the method is enhanced even further by the electrospray ionization (ESI) mass spectrometric detection. The combination of a short pre-column and a packed capillary separation column results in a method with high sensitivity. Reported detection limits, defined as the concentration giving the signal-to-noise ratio 3:1, is 27.7 pM for ferrichrome, 46.1 pM for ferricrocin and 37.4 pM for ferrichrysin.     

Analysis of catecholamines by capillary electrophoresis and capillary electrophoresis-nanospray mass spectrometry. Use of aqueous and non-aqueous solutions compared with physical parameters

Catecholamines were analysed in aqueous and alcoholic non-aqueous solutions by capillary electrophoresis and capillary electrophoresis-mass spectrometry using sheathless nanospray coupling. Decreases in the electrophoretic mobilities of the catecholamines and in the electroosmotic mobilities were observed from water to 1-propanol. Separations were more efficient in all non-aqueous media than in water. The diffusion coefficients of the catecholamines in the different media were determined. The solvent had little effect on the sensitivity of the UV or MS detection. Both methods were successfully applied to the analysis of urine samples.     

Residual solvent content in heatset offset print

A method was developed for measuring the residual solvent content in a dried offset print. The method is based on hexane extraction. The presence of additives and resins in the printing inks necessitated purification of the extract on an aluminum oxide column. In the study concerning the effect of the heatset web offset drying process on print quality, a distinct correlation was found between the residual solvent content of the print and the drying parameters.     

On the sodium and lithium ion affinities of some α-amino acids

The decomposition of 59 different cluster ions (generated by fast atom bombardment) consisting of two different amino acids and a sodium ion was analysed. The only fragment ions of significant abundance could be assigned to sodium ion-bound amino acids. Assuming that the most abundant ion in the fragment ion spectrum corresponds to the amino acid with the highest sodium ion affinity (SIA), the 20 common α-amino acids could be ordered with increasing sodium ion affinity as follows: Gly, Ala, Cys, Val, (Leu, Ile), Ser, Met, Thr, (Phe, Pro), Asp, Tyr, (Glu, Lys), Trp, Asn, Gln, His, Arg. Quantitative determinations were carried out by comparison of the lithium ion affinity (LIA) of Ala with that of dimethylformamide (DMF) in a fragment ion scan of the ion-bound dimer Ala—Li⁺—DMF. LIA(Ala) was calculated from LIA(Ala) = LIA(DMF) – (1/C)ln[I(AlaLi⁺)/I(DMF—Li⁺)], where the constant C was estimated from measurements of proton-bound amine–amino acid clusters. From fragment ion analysis of nine other Li⁺-bound α-amino acid dimers, the following lithium ion affinities were obtained: Gly 51.0, Ala 52.6, Sar 53.5, α-aminobutyric acid 53.7, glycine methyl ester 54.7 and Val 54.8. SIA(Ala) was estimated to be 75% of the lithium ion affinity and from fragment ion analysis of ten Na⁺-bound α-amino acid dimers the following sodium ion affinities were obtained: Gly 37.9, Ala 39.4, α-aminobutyric acid 40.3, Val 41.0, glycine methylster 41.0 and Sar 41.2.