An unusual nicotinamide derivative, 4-pyridone-3-carboxamide ribonucleoside (4PYR), is a novel endothelial toxin and oncometabolite

Our recent studies identified a novel pathway of nicotinamide metabolism that involves 4-pyridone-3-carboxamide-1-β-D-ribonucleoside (4PYR) and demonstrated its endothelial cytotoxic effect. This study tested the effects of 4PYR and its metabolites in experimental models of breast cancer. Mice were divided into groups: 4T1 (injected with mammary 4T1 cancer cells), 4T1 + 4PYR (4PYR-treated 4T1 mice), and control, maintained for 2 or 21 days. Lung metastasis and endothelial function were analyzed together with blood nucleotides (including 4PYR), plasma amino acids, nicotinamide metabolites, and vascular ectoenzymes of nucleotide catabolism. 4PYR metabolism was also evaluated in cultured 4T1, MDA-MB-231, MCF-7, and T47D cells. An increase in blood 4PYR in 4T1 mice was observed at 2 days. 4PYR and its metabolites were noticed after 21 days in 4T1 only. Higher blood 4PYR was linked with more lung metastases in 4T1 + 4PYR vs. 4T1. Decreased L-arginine, higher asymmetric dimethyl-L-arginine, and higher vascular ecto-adenosine deaminase were observed in 4T1 + 4PYR vs. 4T1 and control. Vascular relaxation caused by flow-dependent endothelial activation in 4PYR-treated mice was significantly lower than in control. The permeability of 4PYR-treated endothelial cells was increased. Decreased nicotinamide but enhanced nicotinamide metabolites were noticed in 4T1 vs. control. Reduced N-methylnicotinamide and a further increase in Met2PY were observed in 4T1 + 4PYR vs. 4T1 and control. In cultured breast cancer cells, estrogen and progesterone receptor antagonists inhibited the production of 4PYR metabolites. 4PYR formation is accelerated in cancer and induces metabolic disturbances that may affect cancer progression and, especially, metastasis, probably through impaired endothelial homeostasis. 4PYR may be considered a new oncometabolite.Subject terms: Mechanisms of disease, Pathogenesis, Breast cancer     

The effect of increase in concentration of Na(I) ions on biosorption of Cr(III) ions by Enteromorpha prolifera and Spirulina sp

In this study, the effect of the increase in the initial concentration of Na(I) ions in the solution during biosorption of Cr(III) ions by two edible algae: marine macroalga — Enteromorpha prolifera and microalga — Spirulina sp. was investigated. During biosorption, essential elements are exchanged with alkali and alkaline earth metal ions (e.g. Na(I) ions), which are naturally bound with the biomass. The goal of this study was to investigate the effect of the increase in concentration of Na(I) ions on biosorption performance. The equilibrium of the process is described by Langmuir equation. It was found that with the increase in the initial concentration of NaCl (from 132 to 7331 mg L^?1), there was a lower biosorption capacity of Enteromorpha prolifera (from 85.8 to 51.0 mg g^?1) and Spirulina sp. (74.2 to 20.7 mg g^?1) towards Cr(III) ions. It was also possible to determine the number of times the solution used in the biosorption process can be recycled and yet mantain high biosorption capacity. The determined numbers were: 16 for Enteromorpha prolifera and 19 for Spirulina sp.      

Local environment influence on the optical properties of block copolymers containing an epoxy-based azo-prepolymer

The aim of this contribution was the study of the influence of polymer matrix on the photo-induced orientation of azobenzene groups. Notably, an azo-prepolymer bearing hydroxyl groups was selectively confined in self-assembled phases of different block copolymers, randomly-epoxidized polystyrene-b-polybutadiene-b-polystyrene (SBSep) and polystyrene-b-poly-4-vinylpyridine (S4VP). The formation of hydrogen bonds between the azo-prepolymer and poly-4-vinylpyridine block, as well as the effect of the local environment surrounding the azo-prepolymer were investigated by Fourier transform infrared and ultraviolet–visible spectroscopies. In addition, the reversible optical storage properties of the developed materials were also studied. Birefringent properties of the systems based on S4VP were strongly enhanced by intermolecular interactions with the azo-prepolymer. Specifically, the maximum birefringence level attained by a system containing 13 wt% of azobenzene was around 2.3 × 10⁻² and its remaining birefringence was nearly three times higher than that of the neat azo-prepolymer. Furthermore, a morphological analysis of the designed materials was carried out by atomic force microscopy. Taking into account that the control of the microdomains ordering in block copolymer films is of current interest, special attention was focused on the influence of different variables on the arrangement of the block copolymer microdomains.     

Proficiency assessment of laboratories undertaking hard coal analysis

The Institute for Chemical Processing of Coal in Zabrze, Poland, organized a proficiency testing round to determine the mass fraction of ash, total sulfur and total carbon and the value of gross calorific value. Forty-four participants from Polish heat and power plants, research entities and independent laboratories reported results. The performance of the participants was evaluated using z and E _n scores. Over 85 % of the participants reported satisfactory results indicating the high level of proficiency of the Polish laboratories in the field.     

Bridging the Green Gap: Metal–Organic Framework Heteromultilayers Assembled from Porphyrinic Linkers Identified by Using Computational Screening

In organic photovoltaics, porphyrins (PPs) are among the most promising compounds owing to their large absorption cross-section, wide spectral range, and stability. Nevertheless, a precise adjustment of absorption band positions to reach a full coverage of the so-called green gap has not been achieved yet. We demonstrate that a tuning of the PP Q- and Soret bands can be carried out by using a computational approach for which substitution patterns are optimized in silico. The most promising candidate structures were then synthesized. The experimental UV/Vis data for the solvated compounds were in excellent agreement with the theoretical predictions. By attaching further functionalities, which allow the use of PP chromophores as linkers for the assembly of metal-organic frameworks (MOFs), we were able to exploit packing effects resulting in pronounced redshifts, which allowed further optimization of the photophysical properties of PP assemblies. Finally, we use a layer-by-layer method to assemble the PP linkers into surface-mounted MOFs (SURMOFs), thus obtaining high optical quality, homogeneous and crystalline multilayer films. Experimental results are in full accord with the calculations, demonstrating the huge potential of computational screening methods in tailoring MOF and SURMOF photophysical properties.     

Dispersive liquid–liquid microextraction applied to isolation and concentration of alkylphenols and their short-chained ethoxylates in water samples

Dispersive liquid–liquid microextraction (DLLME) coupled with high-performance liquid chromatography with fluorescence detector was applied for the determination of alkylphenols and their short-chained ethoxylates in water samples. Development of DLLME procedure included optimisation of some important parameters such as kind and volume of extracting and dispersing solvents. Under optimised conditions 50 μL of trichloroethylene in 1.5 mL of acetone were rapidly injected into 5 mL of a water sample. After centrifuging the organic phase containing the analytes was taken for evaporation with a gentle nitrogen purge and reconstituted to 50 μL of acetonitrile. The aliquot of this solution was analysed with the use of HPLC. For octylphenol (OP) and octylphenol ethoxylates (OPEOs) linearity was satisfactory in the range 8–1000 μg L⁻¹ and for nonylphenol (NP) and nonylphenol ethoxylates (NPEOs) linearity was in the range from 50 to about 3000 μg L⁻¹. Limit of quantitation was 0.1 μg L⁻¹ for OP and OPEOs and 0.3 μg L⁻¹ for NP and NPEOs. Satisfactory recoveries between 66 and 79% were obtained for environmental samples. The results showed that DLLME is a simple, rapid and sensitive analytical method for the preconcentration of trace amounts of alkylphenols and their ethoxylates in environmental water samples.     

Highly sulfurated heterocycles via dithiiranes and trithietanes as key intermediates

2,2,4,4-Tetramethyl-3-thioxocyclobutanone (8b) easily reacts with gaseous chlorine to yield the stable alpha-chloro sulfenyl chloride 10. The same product was obtained when 8b was treated either with phosphorus pentachloride (PCl(5)) or sulfuryl chloride (SO(2)Cl(2)) in CCl(4) solution. Sulfur dichloride (SCl(2)) reacts with 8b to give the alpha-chloro thiosulfenyl chloride 12 along with an almost equimolar amount of the trisulfide 13b. The less reactive disulfur dichloride (S(2)Cl(2)) was shown to react slowly with 8b and the symmetrical tetrasulfide 15 was found as the exclusive product. The pure thiosulfenyl chloride 12 added to adamantanethione (8c) yielded the unsymmetrical trisulfide 13c. When 12 was treated with thioacetic acid, the acetylated trisulfide 17 was formed in high yield. "Unzipping" reactions with the acetylated disulfide 16 and trisulfide 17 with morpholine in THF at -40 degrees C led to the formation of mixtures of two sulfur-rich heterocycles identified as the pentathiepane 6b and the hexathiepane 7b. A mixture of analogous products was obtained when alpha-chloro sulfenyl chloride 10 was treated with sodium sulfide in anhydrous THF at -40 degrees C. The formation of 6b and 7b is believed to occur via the intermediate dithiirane 1b and/or the isomeric thiosulfine 2b. In the case of 17 the reaction starts probably with the formation of a nonisolable tetrathiane 18b as presented in Scheme 5.     

New type of thermoplastic multiblock elastomers––poly(ester-block-amide)s––based on oligoamide 12 and oligoester prepared from dimerized fatty acid

Multiblock poly(ester-block-amide)s (PEA) elastomers comprising hard blocks of oligoamide and oligoester soft segments were prepared and their structure-property relations were analysed. The polycondensation reaction of oligoesters (prepared from 1,4-butanediol and dimerized fatty acid) with oligolaurolactam (PA12) gave copolymer series with variable blocks content (the soft segments content was varied from 24 to 60 wt.%). PEAs are the phase system composed of crystallised sequences of oligoamide (hard segment phase) as well as oligoesters (soft segment phase). Mixing between the hard and soft phases was studied by thermal and mechanical measurements (DSC, DMTA). These results have indicated on a multiphase structure of investigated materials. The relationship between the observed thermal and tensile properties and the soft/hard segments content indicated on an increase of the phase separation with soft segments content.     

A silver nanoparticle-based method for determination of antioxidant capacity of rapeseed and its products

A novel silver nanoparticle-based (AgNP) method and two modified procedures, ferric reducing antioxidant power (FRAP) and 2,2'-diphenyl-1-picrylhydrazyl (DPPH), were used for determination of antioxidant capacities of the ethanolic, methanolic, methanolic-aqueous (1?:?1 v/v) and aqueous extracts of rapeseed and its products. The AgNP method based on the electron-transfer reaction between silver ions and antioxidants in an optimized ammonium buffer medium (pH = 8.4) and determination of silver nanoparticle formation has been elaborated. The novel AgNP method was validated using sinapic acid, gallic acid, caffeic acid, ascorbic acid and quercetin as standard antioxidant solutions in concentration ranges of 0.03-0.21 μmol mL(-1), 0.02-0.20 μmol mL(-1), 0.01-0.18 μmol mL(-1), 0.03-0.30 μmol mL(-1) and 0.001-0.009 μmol mL(-1). The calculated detection (DL = 0.01, 0.02, 0.009, 0.02 and 0.0004 μmol mL(-1) for sinapic, gallic, caffeic, ascorbic acids and quercetin, respectively) and quantification limits (QL = 0.04, 0.06, 0.03, 0.08 and 0.001 μmol mL(-1) for sinapic, gallic, caffeic, ascorbic acids and quercetin, respectively) confirm linearity concentration ranges for determination of antioxidant capacity by AgNP assay. The average antioxidant capacities of the studied rapeseed samples ranged between 14.7 and 126.2 μmol sinapic acid per gram for the proposed AgNP method, 7.4-112.7 μmol sinapic acid per gram for the FRAP method and 39.1-339.8 μmol sinapic acid per gram for DPPH assay. The methanol-water mixture (1:1 v/v) was the most efficient solvent for extraction of antioxidants from the studied rapeseed samples. There are significant, positive correlations between the novel AgNP and the modified FRAP, DPPH and FC methods for all extracts of the studied rapeseed samples (r = 0.7564-0.8516, p < 0.001). Satisfactory values of precision (RSD = 1.2-4.4%) and accuracy (recovery = 95.6-104.6%, except methanolic extracts) demonstrate the benefit of the proposed AgNP method for analysis of the antioxidant capacity of rapeseed samples. Results of the principal component analysis (PCA) indicate that there are differences between the total amounts of antioxidants in rapeseed samples extracted by different solvents.     

In Vitro Cultures of <Emphasis Type="Italic">Schisandra chinensis</Emphasis> (Turcz.) Baill. (Chinese Magnolia Vine)—a Potential Biotechnological Rich Source of Therapeutically Important Phenolic Acids

The contents of free phenolic acids and cinnamic acid were determined using an HPLC method in methanolic extracts from biomass of Schisandra chinensis (Turcz.) Baill. (Chinese magnolia vine) at different stages of organogenesis, cultured in vitro on a few variants of Murashige and Skoog (MS) medium, containing different concentrations of plant growth regulators 6-benzylaminopurine (BAP) and 1-naphthaleneacetic acid (NAA) (from 0.1 to 3.0 mg/l) and in extracts from overground parts of plants growing in vivo. Six of 12 analysed compounds were detected in all extracts: chlorogenic, p-coumaric, p-hydroxybenzoic, protocatechuic, salicylic and syringic acids. Total contents of the examined metabolites in biomass of shoot-differentiating callus culture cultivated on six MS medium variants were dependent on concentrations of growth regulators in the media and ranged from 14.90 to 60.05 mg/100 g d.w. Total contents of the compounds in biomass extracts from undifferentiating callus culture maintained only on two of six MS medium variants were higher and amounted to 74.54 and 78.24 mg/100 g d.w. Maximum total contents of phenolic acids in both types of in vitro cultures were greater than in fruits (55.73 mg/100 g d.w.) and leaves (4.55 mg/100 g d.w.) of plants gowning in vivo. Chlorogenic acid and salicylic acid were the main compounds identified in biomass extracts of shoot-differentiating callus cultures (max 22.60 and 21.17 mg/100 g d.w., respectively), while chlorogenic acid (max 38.43 mg/100 g d.w.) and protocatechuic acid (max 20.95 mg/100 g d.w.) prevailed in the extracts from undifferentiating callus cultures. Other compounds dominated in fruits, namely p-coumaric acid (23.36 mg/100 g d.w.) and syringic acid (14.96 mg/100 g d.w.). This is the first report on biochemical potential of cells from S. chinensis in vitro cultures to produce the biologically active phenolic acids. These are the first results on the analysis of this group of metabolites in overground parts of plants growing in vivo, too.