Effect of trace amounts of water on organic solvent transport through gamma-alumina membranes with varying pore sizes

The transport behavior of toluene and n-hexane in gamma-alumina membranes with different pore diameters was studied. It was shown that the permeability of water-lean hexane and toluene is in agreement with Darcy's law down to membrane pore diameters of 3.5 nm. The presence of molar water fractions of 5-8 x 10(-4) in these solvents led to a permeability decrease of the gamma-alumina layer by a factor of 2-4 depending on pore size. In general, a lower permeability was found for hexane than for toluene. Moreover, in the presence of water a minimum applied pressure of 0.5-1.5 bar was required to induce net liquid flow through the membrane. These phenomena were interpreted in terms of capillary condensation of water in membrane pores with a size below a certain critical diameter. This is thought to lead to substantial blocking of these pores for transport, so that the effective tortuosity of the membrane for transport of hydrophobic solvents increases.     

Application of directed metalation in synthesis. Part 7: Synthesis of suitably functionalised benzo[b]thiophenes as key intermediates in the synthesis of benzothienopyranones

One-pot syntheses of (3-hydroxybenzo[b]thiophen-2-yl) aryl methanones from ortho-methylsulfanylaryl N,N-diethyl amides and of 1-(3-hydroxybenzo[b]thiophen-2-yl)ethanone and 1-(3-hydroxybenzo[b]thiophen-2-yl)propan-1-one via an anionic ortho-Fries rearrangement are described. The hydroxy ketones were used as key intermediates in the synthesis of benzothienopyranones.     

Stability and reactivity of all-metal aromatic and antiaromatic systems in light of the principles of maximum hardness and minimum polarizability

It is demonstrated that among various possible isomers of all-metal aromatic compounds such as Al(4)(2-) and their complexes the most stable isomer with the minimum energy is the hardest and the least polarizable. A similar situation is observed for different isomers of all-metal antiaromatic compounds such as Al(4)(4-) and their complexes. It is shown that linear Al(4)(4-) is energetically more stable than its cyclic isomer. The reaction energies associated with the complexation processes highlight the stability of those complexes. The difference in energy, hardness, and polarizability between a cyclic molecule and its linear counterpart convincingly shows that an aromatic molecule exhibits negative changes in energy and polarizability but positive changes in hardness as expected from the principles of minimum energy, minimum polarizability, and maximum hardness. Although the aromaticity of Al(4)(2-) is unequivocally established through this study, the antiaromaticity picture in the case of Al(4)(4-) is shown to be poorly understood;however, the present analysis sheds light on this controversy.     

Spectrophotometric determination of platinum in glass after extraction with polyurethane foam

A spectrophotometric method has been developed for determination of trace amounts of platinum in glass. The method is based on the extraction of platinum(II) from 1M hydrochloric acid containing 0.2M stannous chloride and 4 x 10(-4)M dithizone onto polyurethane foam, elution with acetone (containing 3% v/v concentrated hydrochloric acid) and measurement of the absorbance of the eluate at 530 nm. Beer's law is obeyed up to 10.0 microg/ml Pt. The minimum platinum level in the eluate that can be determined by this method is 0.1 microg/ml.     

SINGLET OXYGEN YIELDS AND RADICAL CONTRIBUTIONS IN THE DYE-SENSITISED PHOTO-OXIDATION IN METHANOL OF ESTERS OF POLYUNSATURATED FATTY ACIDS (OLEIC, LINOLEIC, LINOLENIC AND ARACHIDONIC)

Abstract— The triplet state characteristics (spectrum, lifetime and quantum yield) for four dye sensi tisers [methylene blue (MB), erythrosin (ER), haematoporphyrin (HP) and riboflavin (RF)] were determined in methanol by laser flash photolysis and singlet oxygen yields (0.60 to 0.48) from time-resolved measurements of the 1270 nm near infrared emission. The reaction of singlet oxygen with four long chain unsaturated phenyl esters [oleate (18: 1), linoleate (18: 2), linolenate (18: 3) and arachidonate (20: 4)] was followed quantitatively using the singlet oxygen luminescence technique and also, after continuous420–700 nm irradiation, by HPLC and other analysis of the isomeric product monohydroperoxides. The overall quantum yield of photooxidation (∼10^-2) was shown to be consistent with the observed singlet oxygen quenching constants(2–12 times 10⁴ dm³ mol^-1 s^-1) for the four esters studied and the singlet oxygen lifetime in methanol (τ∼ 9 μs). The isomer product distribution was interpreted in terms of a dual singlet oxygen and radical mechanism, the radical contribution increasing with sensitiser in the order ER = MB < HP ≪ RF, but also showing some dependence on substrate unsaturation. Evidence is presented for singlet oxygen quenching by MB and RF ( k_O = 1.6 and 6.0 times 10⁷ dm³ mol^-1 s^-1) and for the accelerated photobleaching of the dye sensitisers in the presence of the unsaturated esters.     

Separation of antimony(III) with iodide and dithizone by sorption on polyurethane foam from sulphuric acid medium for its spectrophotometric determination in glasses

A method for quantitative separation of antimony(III) by sorption on polyether based polyurethane foam and its spectrophotometric determination has been described. The method involves formation of a pink-red complex of antimony(III) with iodide (0.045M) and dithizone (2.3 x 10(-5)M) in 0.25-0.75M H(2)SO(4) medium, sorption of the complex on polyurethane foam (within 45 min) at room temperature followed by its elution with acidified acetone (acetone containing 0.008% H(2)SO(4)) and spectrophotometric measurement at 507.2 nm ( = 2.56 x 10(4) l mol cm). The method obeys Beer's law from 0.1 to 6.0 mug antimony(III). Tolerance limits of other ions are Co (100 mug), Ni (100 mug), Fe (10 mug), Cu (0.5 mug), Sn (20 mug), Zn (100 mug), As (100 mug), Mn (200 mug), Pb (50 mug), Ti (100 mug), V (50 mug), etc. Interference by iron and copper have been eliminated by treating with KOH prior to the extraction of antimony. The method has been standardized with glass samples spiked with known amounts of antimony and applied to the determination of antimony in various glasses.     

Cationic vesicles as chiral selector for enantioseparations of nonsteroidal antiinflammatory drugs by micellar electrokinetic chromatography

A vesicle-forming chiral cationic surfactant (1R,2S)-(-)-N-dodecyl-N-methyl-ephedrinium bromide was evaluated as a pseudo-stationary phase in micellar electrokinetic chromatography (MEKC) for enantioseparation of eight non-steroidal anti-inflammatory drugs e.g., carprofen, flurbiprofen, fenoprofen, ibuprofen, indoprofen, ketoprofen, naproxen and suprofen by capillary electrophoresis. The effects of varying experimental conditions such as pH and concentration of surfactant in the running buffer on the enantiomer separation of the drugs are reported. A mixture of five of the above drugs was separated and each enantiomeric pair was also separated simultaneously in a single run by use of the surfactant. The strong electrostatic interactions between the analytes and the vesicles seemed to have a major role in the enantiomeric separation of the profens.     

Conversion of N-aromatic amides to O-aromatic esters

[reaction: see text] N-Aromatic secondary amides can be transformed into O-aromatic esters in high yield via N-nitrosamide intermediates. The amides can be generated in situ from the corresponding aromatic amines or nitro compounds, and phenols can easily be made from the esters. The reaction can be modified by addition of methyl methacrylate or toluene at 0 degrees C to give polymerization or deamination, respectively. The rearrangement mechanism may involve radical formation and recombination.     

Cyclopropane chemistry. Part 5 [1,2]. Hexafluorocyclopropane as a source of difluorocarbene

Thermolysis of hexafluorocyclopropane in the presence of ethylene, propene, vinyl chloride, and vinyl bromide gives good yields of the corresponding 1,1-difluorocyclopropanes, formed by addition of difluorocarbene to the olefin. The tetrafluoroethylene formed dimerises to octafluorocyclobutane, co-dimerises with the olefin, or survives, depending on the reaction conditions. With allene, hexafluorocyclopropane gives 1-(difluoromethylene)cyclopropane, 2,2,3,3-tetrafluorospiropentane, and products derived from tetrafluoroethylene and allene.     

An integrated process for purification of lysozyme, ovalbumin, and ovomucoid from hen egg white

This article describes an integrated process for simultaneous purification of lysozyme, ovalbumin, and ovomucoid from hen egg white. The crude egg white extract was passed through a cation exchanger Streamline trade mark SP and the bound lysozyme was eluted with 5% ammonium carbonate, pH 9.0, containing 1 M NaCl after elution of avidin. This partially purified lysozyme was further purified 639-fold on dye-linked cellulose beads. Ovalbumin and ovomucoid did not bind to Streamline SP. Ovalbumin could be precipitated from this unbound fraction by 5% trichloroacetic acid, and ovomucoid was removed from the supernatant by precipitation with ethanol. The yields of lysozyme, ovomucoid, and ovalbumin were 77, 94, and 98%, respectively. All the purified proteins showed single bands on sodium dodecyl sulfate polyacrylamide gel electrophoresis. All the steps are easily scalable, and the process described here can be used for large-scale simultaneous purification of these proteins in the pure form.