Pyrolysis mass spectrometry analysis of poly(vinyl acetate), poly(methyl methacrylate) and their blend coalesced from inclusion compounds formed with γ-cyclodextrin

Direct insertion probe pyrolysis mass spectrometry (DIP-MS) analyses of poly(methyl methacrylate) (PMMA), poly(vinyl acetate) (PVAc) and binary PMMA/PVAc guests, coalesced from their inclusion compounds (ICs) formed with host γ-cyclodextrin (γ-CD) through removal of the γ-CD host, have been performed. A slight increase in the thermal stabilities of the coalesced polymers were recorded both by TGA and DIP-MS compared to the corresponding as-received polymers. The DIP-MS observations pointed out that the thermal stability and degradation products of these polymers are affected once they are included inside the IC channels created by the stacked host γ-CDs. DIP-MS observations suggested that the degradation mechanisms for PMMA and PVAc chains in their coalesced blend were significantly altered from those observed in their as-received and solution blended samples. This was attributed to the presence of specific molecular interactions between the intimately mixed PMMA and PVAc chains in their coalesced blend.     

Tests of the CBM Rich readout and Daq prototype

The CBM RICH detector is an integral component of the future CBM experiment at FAIR, providing efficient electron identification and pion suppression necessary for the measurement of rare dileptonic probes in heavy ion collisions. An overview of the CBM RICH readout and DAQ system prototype is given, consisting of the PADIWA preamplifier-discriminator board, the TDC-HUB board TRBv3, and DAQ and analysis code in the CbmRoot framework. The laboratory setup built for studying the timing characteristics of the readout chain and the analysis results obtained using the laboratory measurements are presented. The fine time calibration and inter-channel delay correction techniques and their implementation and effect are discussed.     

Polylactic acid (PLA)/Silver-NP/VitaminE bionanocomposite electrospun nanofibers with antibacterial and antioxidant activity

The antibacterial property of silver nanoparticles (Ag-NPs) and the antioxidant activity of Vitamin E have been combined by incorporation of these two active components within polylactic acid (PLA) nanofibers via electrospinning (PLA/Ag-NP/VitaminE nanofibers). The morphological and structural characterizations of PLA/Ag-NP/VitaminE nanofibers were performed by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy and X-ray diffraction. The average fiber diameter was 140 ± 60 nm, and the size of the Ag-NP was 2.7 ± 1.5 nm. PLA/Ag-NP/VitaminE nanofibers inhibited growth of Escherichia coli, Listeria monocytogenes and Salmonella typhymurium up to 100 %. The amount of released Ag ions from the nanofibers immersed in aqueous solution was determined by Inductively Coupled Plasma Mass Spectrometry, and it has been observed that the release of Ag ions was kept approximately constant after 10 days of immersion. The antioxidant activity of PLA/Ag-NP/VitaminE nanofibers was evaluated according to DPPH (2,2-diphenyl-1-picrylhydrazyl) method and determined as 94 %. The results of the tests on fresh apple and apple juice indicated that the PLA/Ag/VitaminE nanofiber membrane actively reduced the polyphenol oxidase activity. The multifunctional electrospun PLA nanofibers incorporating Ag-NP and Vitamin E may be quite applicable in food packaging due to the extremely large surface area of nanofibers along with antibacterial and antioxidant activities. These materials could find application in food industry as a potential preservative packaging for fruits and juices.     

Analysis of the alterations in porosity features of some natural stones due to thermal effect

Three types of commercially available carbonate rocks were used in the study to determine the effect of thermal treatment in the range from 100 °C to 500 °C on porosity features in terms of two different approaches such as pore shape factor and quality index values. The ratio of the ultrasonic velocity measurements before and after water saturation was used to differentiate porosity of pores from porosity of cracks under varying temperatures. It was found that, pores in Burdur Beige and Usak White are in the form of cracks, which are situated through inner structure. On the other hand, pores in Patara Limestone are in the form of porosity with lower pore shape factor values. Quality index calculation is another approach based on the comparison of the measured and theoretical ultrasonic velocity values. When the rocks were subjected to higher temperatures, internal stress was developed, crack lengths and numbers were increased and finally the higher pore shape factor and lower quality index values were obtained. This situation was proven by the higher water absorption values for all the stone types with the higher pore shape factor and lower quality index values depend on the noticeable increase in effective porosity values.     

Formation of [M − nH + mNa](m−n)+ and [M − nH + mK](m−n)+ ions in electrospray mass spectrometry of peptides and proteins

The [M - nH + mNa](m-n)+ and [M - nH + mK](m-n)+ ions are common in the electrospray mass spectra of proteins and peptides. The feasibility of forming these ions in the gas phase via collision activation and/or ion-molecule reaction is investigated. Sodium and potassium affinities of the N-methylacetamide anion, the acetate anion, and the 1-propanamide anion have been calculated using density functional theory at the B3LYP/6-311+ +G(d,p) level of theory. These anions were chosen as models for the functional groups on a protein or peptide. These affinity values are then used to calculate reaction enthalpies of alkali hydroxides, chlorides, and hydrates with N-methylacetamide, acetic acid, the acetate anion, and 1-propanamine, model reactions that may lead to formation of the [M - nH + mNa](m-n) and [M - nH + mK](m-n)+ ions. It is found that a number of these reactions are exothermic or slightly endothermic (deltaH(o) < + 20 kcal/mol) and are accessible after collision activation in the lens region. The potential energy hypersurfaces of model reactions between NaOH and formamide as well as NaCl and formamide show relatively flat surfaces devoid of significant barriers.     

Amphiphilic folded dendrimer discs and their thermosensitive self-assembly in water

Folded dendrimers with peripheral ether side chains show a thermally induced hierarchical aggregation process, in which the transition temperature and the dimensions of the aggregates can readily be tuned via the generation number (see figure).     

Comparing the efficiencies of hydrazide labels in the study of protein carbonylation in human serum albumin

In this work, we establish a methodology for comparing the efficiencies of different hydrazide labels for detecting protein carbonyls. We have chosen acrolein-modified human serum albumin as a model. This system provides a convenient means of reproducibly generating carbonylated protein. Five hydrazide-based labels were tested. Three carry a biotin affinity tag, and the others are simple fatty acid hydrazides. For the biotin-based labels, the yield of the labeling reaction varies considerably, and the most commonly used label, biotin hydrazide, gives the lowest yield. The total tandem mass spectrometry (MS/MS) spectrum counts of modified peptides are similar for all of the biotin-based tags, indicating that factors beyond the labeling efficiency are important in determining the effectiveness of the label. In addition, there is a large variation in the number of spectra obtained for specific, modified peptides depending on the nature of the labeling group. This variation implies that the relative detectability of a particular modification site is highly dependent on the tagging reagent, and more importantly, titration schemes aimed at identifying the most reactive site based on its threshold concentration will be biased by the choice of tagging reagent. The fatty acid hydrazides are somewhat more effective than the biotin-based hydrazides in generating identifiable MS/MS spectra but offer no opportunity for enrichment. For the biotin-based tags, avidin affinity chromatography was used with the tryptic digests, and each tag led to similar enrichment levels.     

Ultrasound assisted one-pot, three-components synthesis of pyrimido[1,2-a]benzimidazoles and pyrazolo[3,4-b]pyridines: A new access via phenylsulfone synthon

A simple, facile, efficient and three-components procedure for the synthesis of pyrimido[1,2-a]benzimidazoles and pyrazolo[3,4-b]pyridines utilizing phenylsulfone synthon, under ultrasonic irradiation was developed.     

Conformal Ricci Collineations of Static Spherically Symmetric Spacetimes

Conformal Ricei collineations of static spherically symmetric spacetimes are studied. The general form of the vector fields generating eonformal Rieei eollineations is found when the Rieei tensor is non-degenerate, in which ease the number of independent eonformal Rieei eollineations is 15, the maximum number for four-dimensional manifolds. In the degenerate ease it is found that the static spherically symmetric spaeetimes always have an infinite number of eonformal Rieei eollineations. Some examples are provided which admit non-trivial eonformal Rieei eollineations, and perfect fluid source of the matter.