Rhodium-Catalyzed Enantioselective Synthesis,Structures, and Properties of Single and Double Azahelicene-Like Molecules

The enantioselective synthesis of aza[6] and [7]helicene-like molecules have been achieved by the cationic rhodium(I)/axially chiral biaryl bisphosphine complex-catalyzed intramolecular [2+2+2] cycloaddition of cyanodiynes. This protocol was successfully applied to the diastereo- and enantioselective synthesis of an S-shaped double aza[6]helicene-like molecule with a high ee value of 89 %. Although no epimerization and racemization were observed in the double carbo[6]helicene-like molecule at 80 °C, epimerization and racemization of the double aza[6]helicene-like molecule proceeded at 80 °C. This double aza[6]helicene-like molecule showed good fluorescent quantum yields and chiroptical responses under both neutral and acidic conditions.     

Isolation of Biphenyl and Polychlorinated Biphenyl-Degrading Bacteria and Their Degradation Pathway

Four strains of biphenyl-degrading bacteria were isolated from a sewage and identified from the Rhodococcus genus (SK-1, SK-3, and SK-4) and Aquamicrobium genus (SK-2) by 16S rRNA sequence. Among these strains, strain SK-2 was most suitable for biphenyl degradation. When 0.65, 1.3, 2.6, or 3.9 mM of biphenyl was used, the biphenyl was completely degraded within 24 and 96 h of culture, respectively. However, in the case of 6.5 and 9.75 mM of biphenyl, the biphenyl degradation yields were about 80 % and 46.7 % after 120 h of culture, respectively. The isolated strains could degrade a broad spectrum of aromatic compounds including high-chlorinated polychlorinated biphenyl (PCB) congeners in the presence of biphenyl. In addition, strain SK-2 could utilize PCB congeners containing one to six chlorine substituents such as 2,2′,4,4′,5,5′-hexachlorobiphenyl. The PCB utilization rate by the strain SK-2 was increased compared to that of other PCB congener-utilizing bacteria. The four isolates metabolized 4-chlorobiphenyl to 4-chlorobenzoic acid and 2-hydroxy-6-oxo-6-(4′-chlorophenyl)-hexa-2,4-dienoic acid. These results suggest the isolated strains might be good candidates for the bioremediation of PCB-contaminated soil, especially high-saline soils.     

Cross‐Coupling of Organolithium with Ethers or Aryl Ammonium Salts by C−O or C−N Bond Cleavage

Various aryl‐, alkenyl‐, and/or alkyllithium species reacted smoothly with aryl and/or benzyl ethers with cleavage of the inert C?O bond to afford cross‐coupled products, catalyzed by commercially available [Ni(cod)₂] (cod=1,5‐cyclooctadiene) catalysts with N‐heterocyclic carbene (NHC) ligands. Furthermore, the coupling reaction between the aryllithium compounds and aryl ammonium salts proceeded under mild conditions with C?N bond cleavage in the presence of a [Pd(PPh₃)₂Cl₂] catalyst. These methods enable selective sequential functionalizations of arenes having both C?N and C?O bonds in one pot.     

Ultraviolet Photoelectron Spectra of Potassium Dosed Higher Fullerenes

Abstract

Ultraviolet photoelectron spectra of potassium dosed higher fullerenes are measured with a synchrotron radiation light source. Potassium dosing to higher fullerenes brings a new structure between the spectral onset of pristine fullerenes and the Fermi level. As the spectral edge of the new structure does not cross the Fermi level, potassium dosed higher fullerenes are not metallic but semiconductive. When the potassium is excessively dosed to the fullerenes, the lower binding energy structures above 5 eV become faint. In contrast to this phenomenon, four distinct structures appear between 5 and 14 eV.     

Power of isotopic fine structure for unambiguous determination of metabolite elemental compositions: In silico evaluation and metabolomic application

In mass spectrometry (MS)-based metabolomics studies, reference-free identification of metabolites is still a challenging issue. Previously, we demonstrated that the elemental composition (EC) of metabolites could be unambiguously determined using isotopic fine structure, observed by ultrahigh resolution MS, which provided the relative isotopic abundance (RIA) of ¹³C, ¹⁵N, ¹⁸O, and ³⁴S. Herein, we evaluated the efficacy of the RIA for determining ECs based on the MS peaks of 20,258 known metabolites. The metabolites were simulated with a ≤25% error in the isotopic peak area to investigate how the error size effect affected the rate of unambiguous determination of the ECs. The simulation indicated that, in combination with reported constraint rules, the RIA led to unambiguous determination of the ECs for more than 90% of the tested metabolites. It was noteworthy that, in positive ion mode, the process could distinguish alkali metal-adduct ions ([M + Na]⁺ and [M + K]⁺). However, a significant degradation of the EC determination performance was observed when the method was applied to real metabolomic data (mouse liver extracts analyzed by infusion ESI), because of the influence of noise and bias on the RIA. To achieve ideal performance, as indicated in the simulation, we developed an additional method to compensate for bias on the measured ion intensities. The method improved the performance of the calculation, permitting determination of ECs for 72% of the observed peaks. The proposed method is considered a useful starting point for high-throughput identification of metabolites in metabolomic research.     

Fabrication of Carbon Nanotube Thin Films for Flexible Transistors by Using a Cross-Linked Amine Polymer

Owing to their remarkable properties, single-walled carbon nanotube thin-film transistors (SWCNT-TFTs) are expected to be used in various flexible electronics applications. To fabricate SWCNT channel layers for TFTs, solution-based film formation on a self-assembled monolayer (SAM) covered with amino groups is commonly used. However, this method uses highly oxidized surfaces, which is not suitable for flexible polymeric substrates. In this work, a solution-based SWCNT film fabrication using methoxycarbonyl polyallylamine (Moc-PAA) is reported. The NH₂-terminated surface of the cross-linked Moc-PAA layer enables the formation of highly dense and uniform SWCNT networks on both rigid and flexible substrates. TFTs that use the fabricated SWCNT thin film exhibited excellent performance with small variations. The presented simple method to access SWCNT thin film accelerates the realization of flexible nanoelectronics.     

Modeling Thioredoxin Reductase-Like Activity with Cyclic Selenenyl Sulfides: Participation of an NH⋅⋅⋅Se Hydrogen Bond through Stabilization of the Mixed Se−S Intermediate

At the redox-active center of thioredoxin reductase (TrxR), a selenenyl sulfide (Se−S) bond is formed between Cys497 and Sec498, which is activated into the thiolselenolate state ([SH,Se⁻]) by reacting with a nearby dithiol motif ([SH^Cys59,SH^Cys64]) present in the other subunit. This process is achieved through two reversible steps: an attack of a cysteinyl thiol of Cys59 at the Se atom of the Se−S bond and a subsequent attack of a remaining thiol at the S atom of the generated mixed Se−S intermediate. However, it is not clear how the kinetically unfavorable second step progresses smoothly in the catalytic cycle. A model study that used synthetic selenenyl sulfides, which mimic the active site structure of human TrxR comprising Cys497, Sec498, and His472, suggested that His472 can play a key role by forming a hydrogen bond with the Se atom of the mixed Se−S intermediate to facilitate the second step. In addition, the selenenyl sulfides exhibited a defensive ability against H₂O₂-induced oxidative stress in cultured cells, which suggests the possibility for medicinal applications to control the redox balance in cells.     

Radical polymerization of trifluoromethyl‐substituted methyl methacrylates and their application for use in pressure‐sensitive paint

Three CF₃‐substituted methyl methacrylates (MMAs), 2,2,2‐trifluoroethyl methacrylate (TFEMA), 1,1,1,3,3,3‐hexafluoroisopropyl methacrylate (HFIPMA) and nonafluoro‐tert‐butyl methacrylate (NFTBMA), were polymerized by conventional radical polymerization to give oxygen‐permeable polymers for application in pressure‐sensitive paint (PSP). The radical copolymerizations of styrene with TFEMA, HFIPMA, or NFTBMA were carried out to examine the effect of CF₃ groups on the polymerizability. The e values increased in the order of MMA (0.40) < TFEMA (0.76) < HFIPMA (1.19) < NFTBMA (1.31). The homopolymers of TFEMA, HFIPMA and NFTBMA (PTFEMA, PHFIPMA, and PNFTBM, respectively) were examined as polymers for use in PSP using 5,10,15,20‐tetrakis(pentafluorophenyl)porphinato platinum(II) (PtTFPP). The PSP consisting of PNFTBMA and PtTFPP exerted very high pressure sensitivity and very low temperature sensitivity. In the absence of oxygen, the temperature sensitivity decreased in the order of PTFEMA > PHFIPMA > PNFTBMA = PMMA, which corresponds to the order of glass transition temperatures (T_g). However, the activation energies of the overall process of the luminescence quenching by oxygen were found to be 16.8 (PMMA), 13.0 (PTFEMA), 6.8 (PHFIPMA), and 4.3 kJ mol^?1 (PNFTBMA). Therefore, the low temperature sensitivity of PNFTBMA was attributed to its high degree of substitution with CF₃ groups and to its relatively high T_g value. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 963–972