Synthesis of polyarylamines by vinylogous nucleophilic substitution polymerization of bis(4-chloro-3-nitrophenyl) sulfone with diamines

A series of new polyarylamines was prepared by the vinylogous nuclephilic substitution polymerization of bis(4-chloro-3-nitrophenyl) sulfone with both aromatic and aliphatic diamines. The synthesis involves the solution polycondensation in a polar aprotic solvent at elevated temperatures, a tertiary amine being used as an acid acceptor. Of these solvents, dimethyl sulfoxide and N-methyl-2-pyrrolidone were the most effective for the preparation of high molecular weight polymers. The polyarylamines having inherent viscosities in the range of 0.1–0.5 were all amorphous and highly soluble in polar aprotic solvents. Thermogravimetric analysis under both air and nitrogen atmospheres indicated that rapid decomposition began above 300°C for the polyarylamines from aromatic diamines.     

Polydimethylsiloxane connection for quartz microchips in a high-pressure system.

An interconnecting technique, the "PDMS connection method", for quartz microchips in a high-pressure system is presented. The connection between quartz microchips is an essential technology for modular microfluidic devices, such as microchip-HPLC. PDMS was applied to the seal material, being spread on the seal side of the chips, and set into the metal housing. The characteristics of the PDMS connection method concerning pressure resistance and the extension of the peak were examined. The experimental results showed a good seal at 5 MPa, which seem to be sufficient for realizing microchip-HPLC utilizing a monolithic silica capillary column as a separation medium. The influence of the extra column effect on chromatographic separation was almost the same as in the case using a commercial union fitting. In addition, the PDMS connection enabled the detachability of chip-based modules with user-friendliness. Our experimental findings suggest that the novel PDMS connection method can possibly be applied as a generic technology in high-pressure microTAS.     

On-off-switched crown-metal complexation by photoinduced intramolecular tail (ammonium)-biting

New photoresponsive crown ethers (1H⁺) having a crown ring and an ammoniumalkyl (H₃N⁺(CH₂)_n ^–, n=4,6,10) group attached to the two sides of an azobenzene have been synthesized. Photoresponsive properties (thermal isomerization, metal extraction, membrane transport, etc.) were examined, and the results were compared with those of other photoresponsive crown ethers and complexons.     

Synthesis of (±)-lineatin,the unique tricyclic pheromone of Trypodendron lineatum (olivier)

(+-)-3,3,7-Trimethyl-2,9-dioxatricyclo[4.2.1.0^{4, 7}]noname

and (+-)-3,3,7-trimethyl-2,9-dioxatricyclo[3.3.1.0^{4, 7}] nonane

were synthesized. The latter was shown to be (+-)-lineatin, an ambrosia beetle pheromone.     

Determination of the chemical nature of active surface sites present on bulk mixed metal oxide catalysts

CH3OH temperature programmed surface reaction (TPSR) spectroscopy was employed to determine the chemical nature of active surface sites for bulk mixed metal oxide catalysts. The CH3OH-TPSR spectra peak temperature, Tp, for model supported metal oxides and bulk, pure metal oxides was found to be sensitive to the specific surface metal oxide as well as its oxidation state. The catalytic activity of the surface metal oxide sites was found to decrease upon reduction of these sites and the most active surface sites were the fully oxidized surface cations. The surface V5+ sites were found to be more active than the surface Mo6+ sites, which in turn were significantly more active than the surface Nb5+ and Te4+ sites. Furthermore, the reaction products formed also reflected the chemical nature of surface active sites. Surface redox sites are able to liberate oxygen and yield H2CO, while surface acidic sites are not able to liberate oxygen, contain either H+ or oxygen vacancies, and produce CH3OCH3. Surface V5+, Mo6+, and Te4+ sites behave as redox sites, and surface Nb5+ sites are Lewis acid sites. This experimental information was used to determine the chemical nature of the different surface cations in bulk Mo-V-Te-Nb-Ox mixed oxide catalysts (Mo(0.6)V(1.5)Ox, Mo(1.0)V(0.5)Te(0.16)Ox, Mo(1.0)V(0.3)Te(0.16)Nb(0.12)Ox). The bulk Mo(0.6)V(1.5)Ox and Mo(1.0)V(0.5)Te(0.16)Ox mixed oxide catalytic characteristics were dominated by the catalytic properties of the surface V5+ redox sites. The surface enrichment of these bulk mixed oxide by surface V5+ is related to its high mobility, V5+ possesses the lowest Tammann temperature among the different oxide cations, and the lower surface free energy associated with the surface termination of V=O bonds. The quaternary bulk Mo(1.0)V(0.3)Te(0.16)Nb(0.12)Ox mixed oxide possessed both surface redox and acidic sites. The surface redox sites reflect the characteristics of surface V5+ and the surface acidic sites reflect the properties normally associated with supported Mo6+. The major roles of Nb5+ and Te4+ appear to be that of ligand promoters for the more active surface V and Mo sites. These reactivity trends for CH3OH ODH parallel the reactivity trends of propane ODH because of their similar rate-determining step involving cleavage of a C-H bond. This novel CH3OH-TPSR spectroscopic method is a universal method that has also been successfully applied to other bulk mixed metal oxide systems to determine the chemical nature of the active surface sites.     

Water soluble cyclodextrin polymers: Their interaction with drugs

The complex forming ability of a water-soluble -cyclodextrin epichlorohydrin, polymer (CDPS) and its different molecular weight fractions was studied and compared with the complexing properties of -cyclodextrin (CD) and dimethyl-CD (DM-CD). CDPS was separated into two main fractions. CDPS and its fractions formed well soluble inclusion compounds with the studied drugs. The low molecular weight fraction formed rather stable complexes with small guest molecules, the high molecular weight fraction was found to be more efficient in binding larger substrates. Structural studies of furosemide-CD complexes were attempted by NMR spectroscopy.Presented at the Fourth International Symposium on Inclusion Phenomena and the Third International Symposium on Cyclodextrins, Lancaster, U.K., 20–25 July 1986.     

Effects of electrolytes on the configuration change of cobalt(II)-halide complexes in chloroform/water reverse micelle systems.

The effects of various salts and HClO4 on the configuration change of cobalt(II)-halide complexes in CHCl3/CTAC or CTAB/H2O reverse micelle systems were examined at 25 degrees C by means of spectrophotometry, where CTAC and CTAB represent cetyltrimethylammonium chloride and bromide, respectively. The formation of the [CoCl4]> or [CoBr4]2- species of the tetrahedral configuration from [Co(H2O)6]2+ of the octahedral configuration in the reverse micelles was greatly promoted not only by a decrease in the W value (W = [H2O]/[surfactant]), but also, at a constant W value (e.g., W = 2.0), by the addition of relatively low concentrations of salts or the acid (e.g., 4.0 mol dm(-3) in the aqueous phase or 4.0 x 10(-2) mol dm(-3) in the whole reverse micelle system). The effects of perchlorate salts increased as Na+ < or = Li+ approximately H+ < Sr2+ < Ca2+ < Mg2+. Non-metallic salts, various tetraalkylammonium (R4N+) salts at lower concentrations, gave minor effects. The enhanced effects of metal salts on the configuration change of the cobalt(II)-halide complexes were interpreted by a further distortion of the hydrogen-bonded structure of the water in a "water pool" in the presence of salts of even relatively low concentrations. A conformation change with increasing temperature was also attributed to a further distortion of the water structure. An almost completed formation of [CoBr4]2- as well as [CoCl4]2- was attained in the reverse micelles at a low W value of 0.69 containing LiClO4 or HClO4. A partial transfer of the [CoX4]2- species from a "water pool" into the CHCl3 phase by the addition of the metal salts may be suspected. An examination of cobalt(II)-bromide complexes in dichloromethane/CTAB/H2O at W = 1.3 - 5.55 justified all the arguments concerning the chloroform systems. The Raman spectra of D2O containing concentrated LiBr and LiClO4 have supplied conclusive evidence that the hydrogen-bonded structure of the bulk water is completely distorted by extremely concentrated salts.     

Preparation and thermosensitivity of naturally occurring polypeptide poly(gamma-glutamic acid) derivatives modified by propyl groups

Poly(gamma-glutamic acid) (gamma-PGA) is a biosynthetic polymer, and the carboxyl groups are able to undergo a chemical modification. In this study, poly(alpha-propyl gamma-glutamate) (gamma-PGA propylate) was synthesized by the esterification of these carboxyl groups to yield a thermosensitive and biodegradable polymer. In aqueous solution, the gamma-PGA propylate can impart thermosensitivity by controlling the hydrophobic-hydrophilic balance of the gamma-PGA polymeric chains.