Synthesis of nano-polycrystalline diamond from glassy carbon at pressures up to 25 GPa

ABSTRACT

Nano-polycrystalline diamond (NPD) with various grain sizes has been synthesized from glassy carbon at pressures 15–25?GPa and temperatures 1700–2300°C using multianvil apparatus. The minimum temperature for the synthesis of pure NPD, below which a small amount of compressed graphite was formed, significantly increased with pressure from ～1700°C at 15?GPa to ～1900°C at 25?GPa. The NPD having grain sizes less than ～50?nm was synthesized at temperatures below ～2000°C at 15?GPa and ～2300°C at 25?GPa, above which significant grain growth was observed. The grain size of NPD decreases with increasing pressure and decreasing temperature, and the pure NPD with grain sizes less than 10?nm is obtained in a limited temperature range around 1800–2000°C, depending on pressure. The pure NPD from glassy carbon is highly transparent and exhibits a granular nano-texture, whose grain size is tunable by selecting adequate pressure and temperature conditions.     

Randomly transitional phenomena in the system governed by Duffing's equation

This paper deals with turbulent or chaotic phenomena which occur in the system governed by Duffing's equation, a special type of two-dimensional periodic system. By using analog and digital computers, experiments are carried out with special reference to the change of attractors and of average power spectra of the random processes under the variation of the system parameters. On the basis of the experimental results, an outline of the random process is made clear. The results obtained in this paper will be applied to various physical problems and will also serve as material for the development of a proper mathematics of this phenomenon.     

WIDE RANGE DETECTOR USING PARABOLIC CYLINDRICAL MIRROR FOR THz APPLICATIONS

A new, wide-band, high-speed and high-sensitivity THz detector has been developed. The prototype detector consists of a parabolic cylindrical mirror, a long wire antenna and a Schottky barrier diode. Direct detection measurements have shown a stable sensitivity of 150 ± 50 V/W for 1–2 THz without any adjustments. The long wire antenna was fixed at the focus of parabolic cylindrical mirror then it has been realized less operation steps, easy coupling to the external THz signals and a dramatic enhancement in the practicality of this system. The optically polished mirror and frosted surface one showed comparable sensitivities, thus easy polishing and less cost mirror fabrication can be applied for this system. The radiation pattern showed a maximum radiation angle of approximately 23° with its dominant main lobe, which was attributed to the wire antenna character and confirmed good agreements with classical antenna theory.     

Improved sound absorption performance of three-dimensional MPP space sound absorbers by filling with porous materials

Because microperforated panels (MPPs), which can be made from various materials, provide wide-band sound absorption, they are recognized as one of the next-generation absorption materials. Although MPPs are typically placed in front of rigid walls, MPP space sound absorbers without a backing structure, including three-dimensional cylindrical MPP space absorbers (CMSAs) and rectangular MPP space absorbers (RMSAs), are proposed to extend their design flexibility and easy-to-use properties. On the other hand, improving the absorption performance by filling the back cavity of typical MPP absorbers with porous materials has been shown theoretically, and three-dimensional MPP space absorbers should display similar improvements. Herein the effects of porous materials inserted into the cavities of CMSAs and RMSAs are experimentally investigated and a numerical prediction method using the two-dimensional boundary element method is proposed. Consequently, CMSAs and RMSAs with improved absorption performances are illustrated based on the experimental results, and the applicability of the proposed prediction method as a design tool is confirmed by comparing the experimental and numerical results.     

Visualization of Magnetization Transfer Effect in Polyethylene Glycol Impregnated Waterlogged Wood

To visualize the condition of impregnation of polyethylene glycol (PEG) in waterlogged wood, we demonstrated magnetic transfer (MT) magnetic resonance imaging (MRI) through a series of process of PEG impregnation. Three different samples were examined; reference wood, 10 cm cut wood, and 5 cm cut wood. During this study, the upper section sample was kept immersed in water, for the middle and lower sections the concentration of PEG solution was changed at 20 wt% intervals from 20 to 100 wt%. The impregnated periods of each PEG solution concentration were 14 days. Then, MR imaging were performed with/without MT pulse. The MTR value for both 10 cm- and 5 cm-samples were shown to decrease at 20 wt% PEG at peak concentration. When the sample volume was large, e.g., 10 cm-sample, the MTR value decreased to 100 wt% PEG concentration. In contrast, when a sample volume was small, e.g., 5 cm-sample, MTR value decreased to 60 wt% PEG concentration. In conclusion, MTR analysis makes it possible to nondestructively visualize and evaluate the inner condition concerning the PEG impregnation method for waterlogged wood.     

Color removal method considering perceived lightness

Optical Review - A novel color removal method for digital color images is proposed. In this method, differences of colors in an input color image are reflected effectively, and the perceived...     

High-Speed Optical Local Access Network System Using Bi-Directional Polarization Multiplexing

A high-speed and economical optical local access network system is proposed where bi-directional polarization multiplexing is applied to a bi-directional transmission. Experimental results using a prototype system confirmlow optical loss and environmental stabilities.     

Production of hyperpolarized nuclei for MRI

The project in producing the hyperpolarized ³He and ¹⁹F are addressed in pursuit of radiation free medical diagnosis. The program for production of the hyperpolarized ³He by the brute force method with the Pomeranchuk cooling and the rapid melting of the solid 3He started a few years ago, and is still on the way, while a new program for production of the hyperpolarized ¹⁹F by means of the PHIP (ParaHydrogen Induced Polarization) has just got started. Particular attention is placed upon a new idea of the hyperpolarization catalyst to be used for ¹⁹F.     

Light attenuation in a semitransparent foam sheet-Thickness measurement for industrial use

An optical method for measuring the thickness of heterogeneous materials has been studied. The method is based on the light attenuation theory. A complete system has been constructed in order to demonstrate the applicability of the present method for industrial use. The experimental set-up consists of semiconductor lasers, focusing lenses, photo-diodes serving as a power meter and a personal computer with an A/D converter for data acquisition. Averaging of numerous measurements is required in the present method because the heterogeneous cell structure of the foam material yields large fluctuations in transmitted light levels. The fluctuations can be reduced to below 1% of the transmitted light power by 80 times averaging. The error of the measurement is considered to be a few tens of micrometers in thickness. The present system is capable of sampling data at a rate of 400 Hz and has been successfully applied to a manufacturing process.     

The High-Resolution Fourier Transform Spectrum of Dideuterated Methane CH2D2in the Region between 1900 and 2400 cm

The infrared spectrum of doubly deuterated methane CH₂D₂has been recorded in the region from 1900 to 2400 cm⁻¹at almost Doppler-limited resolution by using two high-resolution Fourier transform spectrometers. The vibrational bands observed include 2ν₄, ν₄+ ν₇, 2ν₇, ν₂, ν₈, ν₄+ ν₉, and ν₇+ ν₉, which were analyzed by taking into account Coriolis and Fermi interactions among them and also those with ν₄+ ν₅, ν₃+ ν₇, and ν₅+ ν₇. Most of the centrifugal distortion constants were constrained to appropriate values, while the vibrational term value and three rotational constants in each of the seven excited states were adjusted along with Coriolis and Fermi interaction parameters by the least-squares analysis of the observed spectrum. The vibration–rotation interaction constants α_sthus determined for the ν₂and ν₈states were combined with those of other fundamental states already published to calculate the equilibrium C–H distance.