Torsionsabhängige Beiträge zur Spin-Bahn-Kopplung in organischen Molekülen

Zusammenfassung Die Spin-Bahn-Kopplung der niedrigen elektronischen Anregungszustände von organischen Molekülen wird untersucht. Es wird gezeigt, daß die Zerstörung der aromatischen Ebene durch Torsionen oder Schwingungen zu nicht-verschwindenden Zweizentrenbeiträgen führt. Am Beispiel des Triphenylmethyl-Kations wird mit Hilfe der LCAO MO SCF-Methode die Größenordnung der auftretenden Wechselwirkungen ermittelt. Diese haben wahrscheinlich großen Einfluß auf die strahlungslosen Prozesse in Molekülen mit leicht beweglichen Gruppen.

---

Spin-orbit coupling of the lower excited electronic states of organic molecules has been investigated. It is shown that any destruction of the aromatic plane through torsions or vibrations leads to non-vanishing contributions from two-centre integrals. The order of magnitude of this type of interactions is determined for the triphenylmethyl-cation with the aid of the LCAO MO SCF method. These interactions probably have much influence on radiationless transitions in molecules containing mobile groups.

---

Résumé Etude du couplage spin-orbite dans les états électroniques exités les plus bas des molécules organiques. Toute non planéité aromatique créée par torsions ou vibrations entraîne une contribution non nulle de la part des intégrales bicentriques. L'ordre de grandeur de ce type d'interaction est detérminé, à l'aide de la méthode L.C.A.O. M.O. SCF, pour le cation triphenylméthyle. Ces interactions ont probablement beaucoup d'influence sur les transitions non radiatives dans les molécules contenant des groupements mobiles.

     

The first 1,2-dibora-[2]ferrocenophane and its dynamic behaviour in solution

1,2-Bis(dimethylamino)-1,2-dibora-[2]ferrocenophane (1) was prepared by the reaction of 1,1′-dilithioferrocene with 1,2-dichlorobis(dimethylamino)diborane(4). In addition to hindered rotation about the B-N bond (ΔG^‡ > 80 kJ mol⁻¹), another dynamic process was revealed by ¹H and ¹³C NMR in solution at low temperature, and interpreted as motion of the cyclopentadienyl rings between staggered and eclipsed conformations (ΔG_{(233 K)}^‡ = 44 ± 1 kJ mol⁻¹).     

Exact sequence analysis for three-dimensional hydrophobic-polar lattice proteins

We have exactly enumerated all sequences and conformations of hydrophobic-polar (HP) proteins with chains of up to 19 monomers on the simple cubic lattice. For two variants of the HP model, where only two types of monomers are distinguished, we determined and statistically analyzed designing sequences, i.e., sequences that have a nondegenerate ground state. Furthermore we were interested in characteristic thermodynamic properties of HP proteins with designing sequences. In order to be able to perform these exact studies, we applied an efficient enumeration method based on contact sets.     

Die Reaktionen von Eisen(III)-chlorid mit Trithiazylchlorid. Die Kristallstruktur von [S4N4Cl]+[FeCl4]⊖

Reactions of Iron Trichloride with Trithyazyl Chloride. Crystal Structure of [S₄N₄Cl]⁺[FeCl₄]^? Iron trichloride reacts with (NSCl)₃ yielding S₄N₄[FeCl₄]₂, S₃N₃Cl₂[FeCl₄] or S₄N₄Cl[FeCl₄], depending on the reaction conditions. The i.r. spectra prove the presence of [FeCl₄]^? ions for all three compounds. The ⁵⁷Fe-Mössbauer spectra show a slight quadrupole splitting at 80 K for S₃N₃Cl₂[FeCl₄] (ΔE^Q = 0.42 mm · s^?1) and S₄N₄Cl[FeCl₄] (ΔE^Q = 0.23 mm · s^?1), which indicates a slight deformation of the FeCl₄^? tetrahedra. The crystal structure of S₄N₄Cl[FeCl₄] was determined and refined with X-ray diffraction data (2549 independent reflexions, R = 0.026). S₄N₄Cl[FeCl₄] crystallizes in the triclinic space group P1 with two formula units per unit cell. The lattice constants are a = 712, b = 911, c = 1006 pm, α = 76.5°, β = 83.8° and γ = 80.5°. The structure consists of the so far unknown [S₄N₄Cl]^⊕ cations and slightly deformed FeCl₄^? ions. The [S₄N₄Cl]^⊕ ion consists of a S₄N₄ ring built up of two nearly planar S₃N₂ fragments having a dihedral angle of 136°. The average SN bond length is 157 pm, the SCI bond length 214 pm.     

Improved determination of flavour compounds in butter by solid-phase (micro)extraction and comprehensive two-dimensional gas chromatography

The practicability and potential of comprehensive two-dimensional gas chromatography (GC x GC) coupled to both conventional flame ionisation (FID) and time-of-flight mass spectrometric (TOF-MS) detection, were compared with those of conventional one-dimensional (1D) GC, with the determination of flavour compounds in butter as an application. For polar flavour compounds, which were collected from the aqueous fraction of butter by means of solid-phase extraction (SPE), it was found that GC x GC dramatically improves the overall separation. Consequently, quantification and preliminary identification based on the use of ordered structures, can be performed more reliably. The improvement effected by replacing 1D-GC by GC x GC is considerable also in the case of TOF-MS detection, as illustrated by the high match factors generally obtained during identification. GC x GC was also used successfully for the characterisation of volatile flavour compounds in the headspace of butter collected by solid-phase microextraction (SPME) and to study the effect of heat treatment on the composition of butter samples in more detail.     

Limitations and perspectives in the determination of carbofuran with various liquid chromatography-mass spectrometry interfacing systems

Column liquid chromatography with mass spectrometric detection (LC-MS) has been widely accepted as the preferred technique for the identification and quantification of polar and thermally labile compounds at trace levels. Over the last decade many different types of LC-MS interfacing techniques have been used for the determination of carbamate pesticides and especially for the N-methylcarbamate carbofuran. This article addresses the difficulties encountered with the various types of LC-MS interface and discusses recent alternatives for the determination of carbofuran. With thermospray and particle beam interfaces the quantification of carbofuran is affected by both the ion source pressure and temperature, whereas quantification using the recently developed atmospheric pressure ionization interfaces, atmospheric pressure chemical ionization, electrospray, and ionspray, is less dependent on these parameters.     

Alignment of electronic angular momentum by stimulated raman scattering with delayed pulses

The recently developed STIRAP-technique (J. Chem. Phys. 92, 5363 (1990)) is applied to efficient population transfer and alignment of metastable Ne* atoms. Alignment parameters in the range ?0.3≧A ₀ ² ≧?1.0 are observed. The degree of alignment can be controlled by changing the angle between the field vectors of the linearly polarized pump- and Stokes-lasers. The transfer efficiency depends also on this angle. The results of numerical calculations agree satisfactorily with the experimental data.     

Systematische untersuchungen über das verhalten von organozinnverbindungen gegenüber flüssigem schwefeldioxid II. Reaktionen von arylstannanen mit flüssigem SO2

The behaviour of tetraarylstannanes, R₄Sn (R = C₆H₅CH₂, C₆H₅, o-, m-, p-CH₃C₆H₄), towards SO₂ under various conditions has now been studied in detail. Compared to aliphatic tetraorganostannanes, the variability of the reaction products is much less, so that in nearly all cases only disulfinates, R₂Sn(O₂SR)₂, are formed. The aromatic tin(IV) mono-, di- and tri-sulfinates are also obtained by metathetical reaction between the corresponding organotin halides and sodium sulfinates. A unique feature of triaryltin chlorides, R₃SnCl (R = C₆H₅, o-, m-, p-CH₃C₆H₄), is their disproportionation in liquid SO₂ leading to disulfinates, R₂Sn(O₂SR)₂, and dichlorides, R₂SnCl₂. (p-CH₃C₆H₄)₂SnCl₂, under more efficient conditions, also accepts SO₂ forming (p-CH₃C₆H₄SO₂)₂SnCl₂. The structural investigations of the newly prepared compounds are carried out on the basis of their IR and ¹H NMR spectra.     

Tetrakis(2-hydroxyphenyl)ethene and derivatives. A structurally preorganized tetradentate ligand system for polymetallic coordination chemistry and catalysis

A topologically unique, conformationally constrained tetradentate ligand system for polymetallic coordination chemistry has been developed: tetrakis(2-hydroxyphenyl)ethene (1a) and substituted derivatives. The design exploits the planarity of the tetraphenylethylene core to impart rigidity to the roughly square oxygen binding array, while maintaining a degree of conformational mobility associated with rotation about the aryl-ethylene carbon-carbon bonds. Tetrakis(2-hydroxyphenyl)ethene derivatives are designed to promote multiple metal bridging over chelating coordination modes. The ligand is synthesized from anisole or 4-tert-butylanisole in four steps via the 2,2'-dimethoxybenzophenone hydrazones 4a,b. The sterically hindered ortho-substituted tetraphenylethylene core is produced in high yield by acid-catalyzed decomposition of the corresponding diaryl diazomethane prepared in situ by oxidation of the hydrazone using nickel peroxide. Deprotection of the methyl ethers using boron tribromide gives tetrakis(2-hydroxyphenyl)ethene (1a), characterized by X-ray crystallography, and tetrakis(5-tert-butyl-2-hydroxyphenyl)ethene (1b). Sterically isolating substituents in the 3-position can be installed via Claisen rearrangement/hydrogenation, providing tetrakis(3-n-propyl-2-hydroxyphenyl)ethene (6) efficiently. To illustrate potential applications of this unprecedented ligand class, two coordination complexes are reported, including tetrakis(2-diethylaluminoxyphenyl)ethene (8), a structurally robust eight-membered-ring aluminum/oxygen crown complex characterized both in solution and in the solid state.     

Determination of mono-ortho substituted chlorobiphenyls by multidimensional gas chromatography and their contribution to TCDD equivalents

The mono-ortho chlorobiphenyls (CBs) 60, 74, 114, 123, 157, 167 and 189 were determined in Aroclor mixtures and aquatic organisms by multidimensional gas chromatography with electron capture detection (MDGC/ECD), using a combination of an Ultra 2 and an FFAP column. MDGC/ECD is recommended as the most suitable technique for direct determination of these CBs, without a liquid chromatographic (LC) pre-separation of mono-ortho CBs from the other CBs. Dependent, to some extent, on the stationary phase used, single-column determinations of these CBs easily yield too high results due to the presence of interferences. The contribution of the mono-ortho CBs studied to the total 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) equivalents (TEQs) from CBs in fish is highly dependent on the toxic equivalency factors (TEFs) used and varies between 0.02 and 22%. This contribution is mainly due to CBs 74, 114, 157 and 167 which may easily be determined by taking three heart-cuts and combining them into one MDGC/ECD run. The analytical error is negligible compared with the huge uncertainty of the TEFs. A need for more precise TEFs is emphasized.