Simple and Convenient Synthesis of 21‐Thioalkylether Derivatives of Methyl 16‐Prednisolone Carboxylates

The antedrug approach for corticosteroids has been described as a fundamentally sound approach for the development of safer anti‐inflammatory and anti‐asthmatic therapy. However, the derivatization of prednisolone and its congeners have been considered to be major pitfalls, because their syntheses are complicated by the presence of numerous carboxylate esters and hydroxyl functions in the steroid nucleus. A simple and direct synthesis of 21‐thioalkylether derivatives of methyl 16‐prednisolonecarboxylates is described. The 21‐mesylate of the methyl 16‐prednisolonecarboxylate and 9‐fluoro‐17‐dehydro methyl 16‐prednisolonecarboxylate were reacted with Na‐thioalkoxides to furnish the desired thioethers in good yields. A previously published method for the methanolysis of 16‐cyanoprednisolone to methylcarboxylate has been reexamined, and the conditions are explained clearly. The reaction conditions for all these reactions were critical.     

Measurement of natural radioactivity in soil from Peshawar basin of Pakistan

Natural radioactivity in the environment may change with time due to human activities, chemical and biological changes. From the view of radiation risk to population, the knowledge of natural radioactivity levels and the measurement of collective radiation dose received by the population is very vital. Radiological constraints on soil of thickly populated Peshawar basin in northern Pakistan were assessed through radiometric assay. Soil samples collected from different locations of four districts of this basin were analysed using an HPGe gamma spectrometer. Activity concentrations of ⁴⁰K, ²²⁶Ra and ²³²Th in these samples was 648 ± 121 (421–996), 45 ± 7 (32–60) and 59 ± 7 (46–72) Bq kg^?1, respectively that followed lognormal distribution. The average concentrations of primordial radionuclides were found to be higher than that reported for the worldwide soil. Radium equivalent activity and gamma index derived from these activity concentrations were lesser than their respective limits. The average absorbed dose rate and the annual effective dose for both indoor and outdoor cases were found to be higher than the values given in the UNSCEAR 2000 report. The results of the present study were compared with those for other locations of Pakistan along with that for the world. The radiological impact of the measured data was evaluated using hazard assessment models. A thoughtful discussion of the above mentioned evaluation is also given.     

Determination of phosphate in freshwater samples by flow-injection with lucigenin chemiluminescence

Lucigenin chemiluminescence (CL) in conjunction with flow-injection analysis (FIA) is used for the determination of phosphate in freshwater samples. The procedure is based on the formation of molybdophosphoric heteropoly acid (MoP–HPA) by the reaction of phosphate and ammonium molybdate under acidic conditions. CL emission was observed as a result of oxidation of lucigenin in aqueous sodium hydroxide solution in the presence of MoP–HPA. Calibration was linear up to 500?µg?L^?1 (r ^2?=?0.9998; n?=?8), with a detection limit (S/N?=?3) of 0.95?µg?L^?1. An injection throughput of 120 h^?1, and relative standard deviation (RSD; n?=?4) of 1.3–3.2% were achieved in the concentration range studied. An on-line chelating column was used to remove interfering cations. The method was applied to freshwater samples, and the results (51?±?1.0 – 107?±?2.0?µg?L^?1) did not differ significantly from results obtained using a spectrophotometric method (52.5?±?1.0 – 102?±?2.0?µg?L^?1) at 95% confidence level (t-test).     

A Resin‐Linker‐Vector Approach to Radiopharmaceuticals Containing 18F: Application in the Synthesis of O‐(2‐[18F]‐Fluoroethyl)‐L‐tyrosine

A Resin‐linker‐vector (RLV) strategy is described for the radiosynthesis of tracer molecules containing the radionuclide ¹⁸F, which releases the labelled vector into solution upon nucleophilic substitution of a polystyrene‐bound arylsulfonate linker with [¹⁸F]‐fluoride ion. Three model linker‐vector molecules 7 a – c containing different alkyl spacer groups were assembled in solution from (4‐chlorosulfonylphenyl)alkanoate esters, exploiting a lipase‐catalysed chemoselective carboxylic ester hydrolysis in the presence of the sulfonate ester as a key step. The linker‐vector systems were attached to aminomethyl polystyrene resin through amide bond formation to give RLVs 8 a – c with acetate, butyrate and hexanoate spacers, which were characterised by using magic‐angle spinning (MAS) NMR spectroscopy. On fluoridolysis, the RLVs 8 a , b containing the longer spacers were shown to be more effective in the release of the fluorinated model vector (4‐fluorobutyl)phenylcarbamic acid tert‐butyl ester ( 9 ) in NMR kinetic studies and gave superior radiochemical yields (RCY≈60 %) of the ¹⁸F‐labelled vector. The approach was applied to the synthesis of the radiopharmaceutical O‐(2‐[¹⁸F]‐fluoroethyl)‐L ‐tyrosine ([¹⁸F]‐FET), delivering protected [¹⁸F]‐FET in >90 % RCY. Acid deprotection gave [¹⁸F]‐FET in an overall RCY of 41 % from the RLV.     

Effect of post-synthetic processing conditions on structural variations and applications of bacterial cellulose

Physicochemical properties of materials can be amended by altering their physical structure through different processing conditions. The present study was conducted to investigate the post-synthesis structural variations and physico-mechanical properties of bacterial cellulose (BC) sheets prepared using different drying methods. Wet BC sheets of the same origin were freeze dried (BC-FD), dried at room temperature (25 °C) (BC-DRT), and dried at elevated temperature (50 °C) (BC-DHT). FE-SEM micrographs revealed that BC-DRT and BC-DHT had a more tightly packed and compact structure than the loosely held fibrils of BC-FD. XRD analysis revealed the relative crystallinity of the BC sample to be 64.60, 59.16, and 47.20 % for BC-DHT, BC-DRT and BC-FD, respectively. The water holding capacity (WHC) of the BC-FD was higher than that of the other two samples. Four consecutive drying and rewetting cycles demonstrated that the WHC of all samples decreased with each cycle. The WHC of BC-DRT and BC-DHT was reduced to almost 0 after the first drying cycle, but the BC-FD samples were able to regain some of their WHC. The tensile strength and elongation modulus were in the order of BC-DHT > BC-DRT > BC-FD. Overall, the results of this study revealed that the post-synthetic processing conditions had a strong effect on the structure and physico-mechanical properties of BC.     

Study of the Interaction Between Promazine Hydrochloride and Surfactant (Conventional/Gemini) Mixtures at Different Temperatures

In the present paper, the micellization of an amphiphilic drug, promazine hydrochloride, and gemini surfactants (16-s-16) with s = 4–6 and the monomeric hexadecyltrimethylammonium bromide (CTAB) counterparts has been examined conductometrically in the pure and mixed states in aqueous solutions at different compositions and temperatures (298.15–308.15 K). Dicationic gemini surfactants provide much better environment for the micellization behavior than the corresponding monocationic counterpart CTAB. The critical micelle concentration (cmc) values are lower than the cmc for ideal mixing, cmc ^id, suggesting attractive interactions between the two components in mixed micelles. The micellar mole fractions of surfactants, evaluated by different models, show greater contributions of surfactants in mixed micelles and increase with increasing concentrations of these surfactants. The negative values of β suggest synergism in the mixtures, which is highly beneficial as it reduces the total amount of surfactants required in a particular application, leading to reductions of cost and environmental impact. Activity coefficients (f ₁ and f ₂) are always less than unity showing nonideality in the systems. The data have been also used for evaluation of thermodynamic parameters.     

Radiostrontium separation from sodium molybdate solution and its measurement using LSA: an application to radiopharmaceutical analysis

Technetium (^99mTc), a decay product of molybdenum (⁹⁹Mo), is employed as radioisotope in nuclear medicine. Several practical devices known as generators are commercially available which enable the user to separate the daughter from the parent radionuclide. The present study is focused on quality control of chromatographic technetium generator. A properly constructed generator should comply with international requirements of radionuclide purity of ⁹⁰Sr/⁹⁹Mo ≤ 6 × 10^?8 and ⁸⁹Sr/⁹⁹Mo ≤ 6 × 10^?7. For this purpose an analytical method was optimized to quantify radiostrontium (⁸⁹Sr and ⁹⁰Sr) in sodium molybdate [Na ₂ ⁹⁹ MoO₄] solution, a fission product used for ⁹⁹Mo/^99mTc generators. Dowex 1 × 8 and alumina were used in sequence followed by tributyl phosphate extraction for radiostrontium separation. Cerenkov measurement of ⁸⁹Sr and ⁹⁰Sr (through its descendent ⁹⁰Y) was performed using Perkin Elmer Tricarb LSA 3170 with detection efficiency of 42 and 14 %, respectively. Since efficiency of Cerenkov counting is sensitive to presence of color, spectral index of sample was used to correct the counting efficiency. The chemical recovery for strontium was 22 % and for yttrium was 80 % as determined by inductively coupled plasma optical emission spectrometry. Lower limit of detection was found to be 6.3 and 14.4 Bq L^?1 for ⁹⁰Sr and ⁸⁹Sr, respectively with 60 min counting time. Hence method can be applied successfully to analyze ^89,90Sr in fission molybdenum used as radiopharmaceutical with a relative error of <10 %.     

Experimental comparison of performance and emission characteristics of 4-stroke CI engine operated with Roselle and Jatropha biodiesel blends

The environmental degradation, combined with the continuous depletion of the world's fossil fuel reserves, has forced the search for alternative fuels. This study was performed to investigate the performance of novel biodiesels in the CI engine. The experiments were performed at three different compressions ratios (16:1, 17:1, 18:1) and four loading conditions (25%, 50%, 75%, 100%). Different types of fuels such as jatropha biodiesel (JB), roselle biodiesel (RB), and ternary biodiesel (TB) were prepared and analyzed. The thermal performance of different fuels was analyzed in terms of brake thermal efficiency (BTE), brake specific fuel consumption (BSFC), and exhaust gas temperature (EGT). The emission characteristics such as CO₂ emission, NO_x emission, and smoke emission were analyzed for all types of fuels. The results of these fuels in the engine were compared with mineral diesel (MD). The BTE was increased with increasing compression ratios and loads for all types of fuels. The BSFC was increased with increasing compression ratios but decreased with increasing loads. The increase in emission of NO_x was observed at higher compression ratios and loads. However, the CO₂ emission was decreased at higher loads and lower compression ratio. The performance curves achieved with a 20% jatropha biodiesel blend showed results that were approximate to those obtained with pure MD. The comparative analysis between different fuels showed that JB exhibit higher thermal performance as compared to other biodiesels. Therefore, JB can be a better alternative to conventional fuel.