Establishment of hybrid-derived offspring populations in the Ohomopterus ground beetles through unidirectional hybridization

An approach to deduce the mechanism of stabilization of the hybrid-derived populations in the Ohomopterus ground beetles has been made by comparative studies on the phylogenetic trees of the mitochondrial and nuclear DNA. A phylogenetic tree based on the internal transcribed spacer (ITS) of nuclear ribosomal gene roughly reflects the relations of morphological species group, while mitochondrial NADH dehydrogenase subunit 5 (ND5) gene shows a considerable different topology on the tree; there exist several geographically-linked lineages, most of which consist of more than one species. These results suggest that the replacement of mitochondria has occurred widely in the Ohomopterus species. In most cases, hybridization is unidirectional, i.e., the species A (♂) hybridized with another species B (♀) and not vice versa, with accompanied replacement of mitochondria of A by those of B. The results also suggest that partial or complete occupation of the distribution territory by a hybrid-derived morphological species. The morphological appearance of the resultant hybrid-derivatives are recognized as that of the original species A. Emergence of a morphological new species from a hybrid-derived population has been exemplified.     

HeII(304Å) photoelectron spectrum of N2O4

The 304 Å HeII photoelectron (PE) spectrum of a mixture of NO₂ and N₂O₄ in the gaseous phase has been measured in the region up to 29 eV. By subtracting the HeII spectrum of NO₂ from the mixed spectrum, the HeII spectrum due to N₂O₄ has been deduced, indicating that there are three new PE bands in the region 20—29 eV. Relative band intensities have also been obtained from the HeII of N₂O₄ below 16 eV, corrected for electron collecting efficiency.     

Enzyme-less amperometric biosensor for l-ascorbate using poly-l-histidine-copper complex as an alternative biocatalyst

A poly-l-histidine(PLH)-copper(II) complex can be used as an alternative biocatalyst in an O(2) detection-type amperometric enzyme-less l-ascorbate (AsA) sensor. The PLH-Cu(II) membrane was simply prepared by entrapping the PLH in polyacrylamide gel and subsequent treatment of the gel with CuCl(2) solution. This enzyme-less biosensor can be used over a relatively wide pH region from 4 to 11 and enables precise determination of AsA (RSD less than 3%, n=10) at pH 7.0. The fundamental performance characteristics (sensitivity, response time, and linear range) of this PLH-Cu(II)-based sensor is comparable to those of a native ascorbate oxidase-based sensor. Unfortunately, the selectivity is inherently rather low and, as a result, the response was degraded in the presence of higher concentrations (more than mM order) of quinones. However, reducing sugars caused no interference and the sensor could be used to detect AsA in some fruits and drinks. This enzyme-less sensor has excellent stability for at least 3 months of repeated analysis (more than 300 samples) without loss of ordinal activity.     

Measurement of acid-catalyzed isomerization of unsaturated aldehyde-2,4-dinitrophenylhydrazone derivatives by high-performance liquid chromatography analysis

Aldehyde-2,4-dinitrophenylhydrazones exist as (E)- and (Z)-geometrical isomers, and adventitious isomerization during sample preparation can cause analytical errors. Purified alkenal-2,4-dinitrophenylhydrazone derivatives comprise only the (E)-isomer. However, partial isomerization to the (Z)-isomer occurs upon addition of acid to attain an equilibrium isomer ratio. The UV-visible spectral properties of the isomers differ; the (Z)-isomer exhibiting a 6-10 nm lower absorption maximum compared to the (E)-isomer. Alkenal-2,4-dinitrophenylhydrazones having a CC double bond at the 2- or 3-position of the alkenal exhibited similar absorption maxima with an equilibrium isomer ratio (0.035) that was much lower than those of other alkenals. The CC double bond at the 3-position migrates to a position of conjugation with the CN double bond during hydrazone synthesis to form a stabilized molecular structure. Alkenal-2,4-dinitrophenylhydrazones having a double bond at the 4-position or greater exhibited a similar absorption maxima equilibrium isomer ratio (0.14) to alkanal-2,4-dinitrophenylhydrazones. The quantitative analysis of carbonyl compounds in air or water using DNPH is usually conducted in the presence of an acid catalyst. Consequently, the solution of the direct extract prepared for HPLC or GC analysis contains both (E)- and (Z)-isomers.     

Adsorption characteristics of radionuclides on nickel hexacyanoferrate(ii)

The composition of nickel hexacyanoferrate(II) complexes depends on the ratios of sodium hexacyanoferrate(II) and nickel nitrate solutions mixed. The adsorption behavior of nickel hexacyanoferrate(II) is described; acid treatment of Ni₂Fe(CN)₆ accelerates the adsorption rate of cesium, but does not increase the adsorption capacity. The Ni—Cs exchange ratios of Ni₂Fe(CN)₆ are discussed. In concentrated salt solutions, the distribution coefficients of ⁵⁹Fe, ⁶⁰Co, ⁶⁵Zn. ¹³⁷Cs, ⁹⁵Zr and ¹⁴⁴Ce are determined together with those of ⁸⁵Sr and ¹⁰⁶Ru. A simple determination of ¹³⁷Cs in sea water containing ⁵⁹Fe, ⁶⁰Co, ⁶⁵Zn, ⁹⁵Zr, ¹⁴⁴Ce, ⁸⁵Sr and ¹⁰⁶Ru is described.     

The relationship between the chemical structure of nematic liquid crystals and their pretilt angles

About 50 different additives in one or more of three different nematic mixtures have been investigated to clarify the relationship between the chemical structure of the liquid crystal and the pretilt angle on a polyimide surface. The pretilts found for cells have been explained within our recently proposed population distribution model. For compounds with cyano-groups at one end, we find that the in-plane order is governed both by the surface-mesogen interaction and by the relative strength of the intermolecular interactions in the nematic phase. This strength is nearly linear in alkyl chain length for the compounds investigated. Changes in the strength due to variations in the core of the molecules can be calculated easily by using group contributions from the known Parachors. The in-plane order can be treated as a simple product of the contributions from the liquid crystal and from the polyimide. Different polar end groups will give different angles between the surface and the optical axis of the individual mesogens in the first monolayer. The cyano-group gives the highest angle and alkyl groups the lowest. For nitro-compounds the dimers formed are so strongly bound that they do not break up at the surface. Nitro-compounds will thus act as dialkyl compounds. For dialkyl compounds the pretilt angles are dominated by the difference between the chain lengths at the two ends of the molecule.     

Determination of urea by ion chromatography with an immobilized urease reactor

An immobilized urease reactor can be used with ion chromatography for the simultaneous determination of urea, and sodium, potassium and ammonium ions. The conversion of urea to ammonium ion was found to be 76.5%. The calibration graph for urea was linear over the range 1 × 10^?5?1 × 10^?3 M (RSD 3%). The method was applied to human urine and a chemical fertilizer.     

Improvement of the Derjaguin-Broekhoff-de Boer theory for the capillary condensation/evaporation of nitrogen in spherical cavities and its application for the pore size analysis of silicas with ordered cagelike mesopores

In a previous work, we proposed an improvement of the Derjaguin-Broekhoff-de Boer (DBdB) theory for capillary condensation/evaporation in open-ended cylindrical mesopores. In this paper, we report a further extension of this approach to the capillary condensation/evaporation of nitrogen in siliceous spherical cavities. The main idea of this improvement is to employ the Gibbs-Tolman-Koenig-Buff equation to predict the variation of the surface tension in spherical mesopores. In addition, the statistical film thickness (the so-called t-curve), which is evaluated accurately on the basis of adsorption isotherms measured for MCM-41 materials, is used instead of the originally proposed t-curve to take into account the excess chemical potential due to the surface forces. It is shown that the aforementioned modifications of the original DBdB theory that was refined by Ravikovitch and Neimark have significant implications for the pore size analysis of cagelike mesoporous silicas. To verify the proposed improvement of the DBdB pore size analysis (IDBdB), two series of FDU-1 samples, which are well-defined cagelike mesoporous materials (composed of siliceous spherical cavities interconnected by short necks), were used for the evaluation of the pore size distributions (PSDs). The correlation between the spinodal condensation point in the spherical pores predicted by the nonlocal density functional theory (NDFT) developed by Ravikovitch and Neimark and that predicted by the IDBdB theory is very good in the whole range of mesopores. This feature is mirrored to the realistic PSD characterized by the bimodal structure of pores computed from the IDBdB theory. As in the case of open-ended cylindrical pores, the improvement of the classical DBdB theory preserves its simplicity and simultaneously ensures a significant improvement of the pore size analysis, which is confirmed by the independent estimation of the average pore size by the NDFT and the powder X-ray diffraction method.