On the existence of population-monotonic solutions on the domain of quasi-convex games

On the domain of convex games, the Shapley value and the Dutta–Ray solutions are two well-known solutions that satisfy population-monotonicity. The existence of a population-monotonic solution on the domain of quasi-convex games has been an open question. In this note, we show that in general, no convex combination of the above two solutions can be extended to the domain of quasi-convex games in such a way that preserves population-monotonicity and efficiency.     

Synthesis and Self‐Assembly of NCN‐Pincer Pd‐Complex‐Bound Norvalines

The NCN‐pincer Pd‐complex‐bound norvalines Boc‐D /L ‐[PdCl(dpb)]Nva‐OMe ( 1 ) were synthesized in multigram quantities. The molecular structure and absolute configuration of 1 were unequivocally determined by single‐crystal X‐ray structure analysis. The robustness of 1 under acidic/basic conditions provides a wide range of N‐/C‐terminus convertibility based on the related synthetic transformations. Installation of a variety of functional groups into the N‐/C‐terminus of 1 was readily carried out through N‐Boc‐ or C‐methyl ester deprotection and subsequent condensations with carboxylic acids, R¹COOH, or amines, R²NH₂, to give the corresponding N‐/C‐functionalized norvalines R¹‐D /L ‐[PdCl(dpb)]Nva‐R² 2 – 9 . The dipeptide bearing two Pd units 10 was successfully synthesized through the condensation of C‐free 1 with N‐free 1 . The robustness of these Pd‐bound norvalines was adequately demonstrated by the preservation of the optical purity and Pd unit during the synthetic transformations. The lipophilic Pd‐bound norvalines L ‐ 2 , Boc‐L ‐[PdCl(dpb)]Nva‐NH‐n‐C₁₁H₂₃, and L ‐ 4 , n‐C₄H₉CO‐L ‐[PdCl(dpb)]Nva‐NH‐n‐C₁₁H₂₃, self‐assembled in aromatic solvents to afford supramolecular gels. The assembled structures in a thermodynamically stable single crystal of L ‐ 2 and kinetically stable supramolecular aggregates of L ‐ 2 were precisely elucidated by cryo‐TEM, WAX, SAXS, UV/Vis, IR analyses, and single‐crystal X‐ray crystallography. An antiparallel β‐sheet‐type aggregate consisting of an infinite one‐dimensional hydrogen‐bonding network of amide groups and π‐stacking of PdCl(dpb) moieties was observed in the supramolecular gel fiber of L ‐ 2 , even though discrete dimers are assembled through hydrogen bonding in the thermodynamically stable single crystal of L ‐ 2 . The disparate DSC profiles of the single crystal and xerogel of L ‐ 2 indicate different thermodynamics of the molecular assembly process.     

溶胶-凝胶伴随相分离制备SiO2多孔块体

以正硅酸甲酯(TMOS)为前驱体, 0.01 mol·L^-1盐酸(HCl)为催化剂, 环氧丙烷(PO)为凝胶促进剂, 粘均分子量(M_v)为10000的聚氧化乙烯(PEO)为相分离诱导剂, 采用溶胶-凝胶伴随相分离制备SiO₂多孔块体材料,利用差热分析(DTA)、傅里叶变换红外(FT-IR)光谱、扫描电镜(SEM)、X射线衍射(XRD)、汞压、N₂吸附/脱附等测试技术对所制得的SiO₂多孔块体进行了表征, 探讨了环氧化物调控溶胶-凝胶以及PEO诱导相分离机理. 结果表明, 加入PEO能诱导SiO₂凝胶发生相分离, 当PEO/TMOS摩尔比为0.0018时, 可以获得共连续多孔结构的SiO₂块体材料, 其大孔孔径分布在1-3 μm之间, 比表面积达719 m²·g^-1, 孔体积为0.48 m³·g^-1. 环氧丙烷因其环氧原子的强亲核性和不可逆的开环反应, 促进溶胶-凝胶转换, 同时借助吸附在SiO₂低聚物上的PEO诱导SiO₂凝胶相分离, 从而制备共连续大孔及骨架结构的多孔块体.     

Catalytic roles of the metal ion in the substrate-binding site of coenzyme B12-dependent diol dehydratase

Functions of the metal ion in the substrate-binding site of diol dehydratase are studied on the basis of quantum mechanical/molecular mechanical (QM/MM) calculations. The metal ion directly coordinates to substrate and is essential for structural retention and substrate binding. The metal ion has been originally assigned to the K(+) ion; however, QM/MM computations indicate that Ca(2+) ion is more reasonable as the metal ion because calculated Ca-O distances better fit to the coordination distances in X-ray crystal structures rather than calculated K-O distances. The activation energy for the OH group migration, which is essential in the conversion of diols to corresponding aldehydes, is sensitive to the identity of the metal ion. For example, the spectator OH group of substrate is fully deprotonated by Glu170 in the transition state for the OH group migration in the Ca-contained QM/MM model, and therefore the barrier height is significantly decreased in the model having Ca(2+) ion. On the other hand, the deprotonation of the spectator OH group cannot effectively be triggered by the K(+) ion. Moreover, in the hydrogen recombination, the most energy-demanding step is more favorable in the Ca-contained model. The proposal that the Ca(2+) ion should be involved in the substrate-binding site is consistent with an observed large deuterium kinetic isotope effect of 10, which indicates that C-H bond activation is involved in the rate-determining step. Asp335 is found to have a strong anticatalytic effect on the OH group migration despite its important role in substrate binding. The synergistic interplay of the O-C bond cleavage by Ca(2+) ion and the deprotonation of the spectator OH group by Glu170 is required to overcome the anticatalytic effect of Asp335.     

Photodeposition of Ag2S quantum dots and application to photoelectrochemical cells for hydrogen production under simulated sunlight

UV light irradiation of TiO(2) (λ > 320 nm) in a mixed solution of AgNO(3) and S(8) has led to the formation of Ag(2)S quantum dots (QDs) on TiO(2), while Ag nanoparticles (NPs) are photodeposited without S(8). Photoelectrochemical measurements indicated that the Ag(2)S photodeposition proceeds via the preferential reduction of Ag(+) ions to Ag(0), followed by the chemical reaction with S(8). The application of this in situ photodeposition technique to mesoporous (mp) TiO(2) nanocrystalline films coated on fluorine-doped SnO(2) (FTO) electrodes enables formation of Ag(2)S QDs (Ag(2)S/mp-TiO(2)/FTO). Ag(2)S/mp-TiO(2)/FTO has the interband transition absorption in the whole visible region, while in the spectrum of Ag/mp-TiO(2)/FTO, a localized surface plasmon resonance absorption of Ag NPs is present centered at 490 nm. Ag(2)S QD-sensitized photoelectrochemical cells using the Ag(2)S/mp-TiO(2)/FTO and Ag/mp-TiO(2)/FTO photoanodes were fabricated. Under illumination of one sun, the Ag(2)S photoanode cell yielded H(2) at a rate of 0.8 mL·h(-1) with a total conversion efficiency of 0.29%, whereas the Ag/mp-TiO(2)/FTO photoanode is inactive.     

Electrochemical stability of self-assembled monolayers on nanoporous Au

Desorption of thiolate self-assembled monolayers (SAMs) seriously limits the fabrication of thiol-based devices. Here we demonstrate that nanoporous Au produced by dealloying Au-Ag alloys exhibits high electrochemical stability against thiolate desorption. Nanoporous Au has many defective sites, lattice strain and residual Ag on the ligament surface. First-principles calculations indicate that these surface aspects increase the binding energy between a SAM and the surface of nanoporous Au.     

General synthesis of dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) derivatives

A new straightforward synthesis of dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) derivatives from readily available 2-methoxynaphthalenes is described. Thus, newly developed derivatives of DNTT showed very high field effect mobility in the vapor-processed field-effect transistors up to 8 cm(2) V(-1) s(-1).     

Solid-phase extraction for metabolomic analysis of high-salinity samples by capillary electrophoresis-mass spectrometry

Environmental samples such as soil solutions contain inorganic ions such as NH4(+), K(+), Na(+), NO3(-), and PO4(3-) in high concentrations, which must be removed prior to capillary electrophoresis-mass spectrometry analysis to obtain accurate results. However, the separation of these inorganic ions from ionic metabolites, which are the target compounds in capillary electrophoresis-mass spectrometry analysis, is difficult because the physicochemical properties of the inorganic ions are similar to those of the ionic metabolites. In this study, we used various solid-phase extraction (SPE) columns for the purification of the samples containing inorganic ions in high concentrations. We found that cation-exchange SPE columns successfully filtered out the inorganic ions while retaining most of the organic compounds, which were easily collected with high recovery rates. In addition, 17 cationic metabolites in the soil solution were quantified by CE-MS analysis following the SPE purification process. The results suggest that our method can be used to analyze other environmental samples containing inorganic ions in high concentrations.     

Synergistic effects of sour taste and low temperature in suppressing the bitterness of Aminoleban® EN

Aminoleban? EN, a nutritional product for patients with liver failure, contains three branched-chain amino acids (BCAAs): L-leucine, L-isoleucine, and L-valine. As BCAAs are extremely bitter, Aminoleban? EN has a low palatability, which is a major cause of patient noncompliance. Nutrients for liver failure often need to be taken for long periods, and poor medication compliance can cause serious problems, such as encephalopathy. Therefore it is important to suppress the bitter taste of Aminoleban? EN and thereby improve patient compliance. There are already six different flavoured powders (coffee, green-tea, apple, fruit, plum and pineapple) which can be added to Aminoleban? EN to reduce its unpleasant taste and smell, but it is possible that other factors, such as temperature, may also improve the palatability of Aminoleban? EN. In this study, flavours alone significantly decreased the bitterness intensity of Aminoleban? EN. It was thought that the sweetness and sourness of the flavoured powder would be the main factors involved in decreasing the bitterness. However, low temperature (0-5 °C) decreased the bitterness intensity of Aminoleban? EN, with or without the flavoured powders, compared with normal room temperature (25-30 °C). The sourness intensity of flavoured powders was not decreased at low temperatures, but the sweetness intensity of some flavoured powders did decrease. These results suggest that sourness can be tasted even at low temperatures. As not only the addition of flavoured powders but also low temperatures can reduce the bitterness of Aminioleban? EN, the combination of a sour-flavoured powder and a low temperature will improve the palatability of Aminoleban? EN the most.