Crystallization Kinetics of Silicalite-1: Use of Tetrapropylammonium Bromide and Chloride as Templates

Silicalite-1, the aluminum-free end number of the ZSM-5 zeolites, was synthesized from a batch composition of 3.25 Na₂O · 40.0 SiO₂ · 552 H₂O · 2.00 TPA by using tetrapropylammonium bromide (TPA-Br) or chloride (TPA-Cl) as templates in the temperature range of 100 to 175 °C in a batch system. Conversion of silica in the starting batch composition into silicalite-1 in the product was followed quantitatively. The activation energies of nucleation and crystallization were determined as 37.2 and 66.5 kJ/mol, respectively. The use of TPA-Cl as the template instead of TPA-Br results in longer induction period for crystallization to start and a larger crystal size in product.     

Thermodesorption of LB-multilayers of metal stearates

Thermodesorption of stearate multilayers containing different metal ions was investigated by Interference-enhanced Reflection (IeR) and Nomarsky microscopy. Heating of samples in air leads to desorption of stearyl chains and to formation of metal oxide clusters. A new approach to build controlled structures was made by preparing a surface with neighbouring hydrophobic and hydrophilic areas. It is shown that arranging inorganic particles in a predetermined way is possible.     

New amphiphilic terphenyl liquid crystals for the preparation of highly ordered ultrathin films

Four new amphiphilic liquid crystals have been synthesized, in which terphenyl was used as the mesogenic unit. In order to enable the formation of Langmuir Monolayers at the air/water-interface, the molecules were equipped with slightly polar headgroups such as esters or a carboxylic acid group. All compounds can be transferred onto solid substrates. In addition, it is possible to prepare freely suspended films of at least one compound in the temperature range of the smectic phases. The phases of the different states, bulk, monolayer, freely suspended film, and Langmuir-Blodgett multilayers have been investigated by means of monolayer isotherms, optical textures, differential scanning calorimetry (DSC) and small angle X-ray scattering.     

Effect of Electric Field on Dielectric Properties of SnO2 Sb2O3 and their Mixed Thin Films

Thin films of various thicknesses in the MIM structure have been prepared from the the powders of SnO₂, Sb₂O₃ and (SnO₂ + Sb₂O₃) of high purity by the thermal evaporation technique in a vacuum of 10⁻⁵ Torr. Dielectric properties of SnO₂, Sb₂O₃, and their mixed thin films have been studied with ac and dc electric fields and frequency. Capacitance and loss tangent are almost independent on dc voltage upto 1.0 V for SnO₂, 10.0 V for Sb₂O₃ and 2.5 V for mixed films. These capacitors become unstable at 1.0 V for SnO₂ films and 2.5 V for mixed films. For higher film thicknesses the decay in these films starts at higher voltages. Capacitance and loss tangent increases with applied ac voltage in SnO₂, Sb₂O₃, and their mixed films. A comparison of the capacitance values of SnO₂, Sb₂O₃, and their mixed films showed that the capacitance values are less in Sb₂O₃ as compared to SnO₂ films. In mixed films the capacitance is greater than the constituent films. These studies have shown that Sb₂O₃ films are found to be more stable compared to SnO₂ and their mixed films for ac and dc voltages. The results thus obtained on SnO₂, Sb₂O₃, and their films are presented and discussed.     

The Influence of Mechanical Activation of Quartz and Quartz/γ-Al2O3 Mixtures on the Sodium A Zeolite Formation

It could be shown that the preparation of sodium A zeolite is possible by the reaction of quartz and γ-Al₂O₃ with NaOH-solution. The zeolite formation is dependent on the mechanical preliminary treatment of quartz. Only the partially crystalline part of quartz dissolves and reacts with Al₂O₃ to form zeolite. The grinding of quartz/γ-Al₂O₃ mixtures can in certain limits raise the zeolite formation but essentially only influences the kinetics of the zeolite formation.     

Mechanical Damping of YBa2Cu3O7 –x at Temperatures above 300 K

Damping of ultrasonic waves with frequencies in the 100 kHz region was measured in the temperature region 300 … 1000 K. Two peaks could be observed (near 400 K or near 700 K, respectively). Occurrence of these peaks depends on oxygen content of the sample. The higher temperature peak is attributed to phase transition Pmmm 〈– – –〉 P 4/mmm of YBa₂Cu₃O_{7 – x}.