The Search for Transuranium Elements and the Discovery of Nuclear Fission

The synthesis of new, artificial elements beyond uranium was at the cutting-edge of physical research in the 1930s, and nearly half a dozen transuranium elements were reported between 1934 and 1938. Nuclear physicists and radiochemists collaborated closely, but each field introduced fundamental assumptions that proved to be false: that nuclear changes would always be small, and that transuranium elements would resemble transition elements chemically. With its surprise ending in the discovery of nuclear fission, the misguided transuranium project can be viewed as an example of the illogical progress of scientific discovery. It is also an example of an interdisciplinary collaboration that was flawed yet crucial, for although chemists and physicists both contributed to the delay in discovering fission, their collaboration was essential in leading them to it in the end.     

A Novel Naphthalene-Immobilized Nanoporous SBA-15 as a Highly Selective Optical Sensor for Detection of Fe<Superscript>3+</Superscript> in Water

A novel organic-inorganic hybrid optical sensor (SBA-NCO) was designed and synthesized through immobilization of isocyanatopropyl-triethoxysilane and 1-amino-naphthalene onto the surface of SBA-15 by post-grafting method. The characterization of materials using XRD, TEM, N₂ adsorption-desorption, and FT-IR techniques confirmed the successful attachment of organic moieties and preserving original structure of SBA-15 after modification step. Fluorescence experiments demonstrated that SBA-NCO was a highly selective optical sensor for the detection of Fe³⁺ directly in water over a wide range of metal cations including Na⁺, Mg²⁺, Al³⁺, K⁺, Ca²⁺, Cr³⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, and Pb²⁺ in a wide pH values.     

Microtextures Induced by Nanosecond Laser on Ni–Co Alloy Coatings

Ni–Co alloys have a wide range of applications in various fields owning to their excellent physical, chemical, and mechanical properties. In this paper, we prepare Ni–Co alloy coatings on 316L stain steel surfaces by electroplating. We present a novel approach utilizing a nanosecond laser to induce microtextures on Ni–Co alloy coatings. We study experimentally the effects of laser power and scanning rate on the surface morphologies of Ni–Co alloy coatings. The results indicate that the shape and size of induced microtextures can be controlled by the laser power and scanning rate. The size of grains increases with increase in the work current of the laser (WCL) at a certain scanning rate. With the WCL constant, the size of grains decreases with increase in scanning rate while their average height increases. It is a simple and easily-controlled method for the fabrication of microstructures on Ni–Co alloy coatings, which has promising applications in investigations of the properties of microtextured surfaces, such as friction, adhesion, and wetting.     

Fatigue life enhancement by irradiation of 12Cr1MoV steel with a Zr<Superscript>+</Superscript> ion beam. Mesoscale deformation and fracture

The structure and properties of 12Cr1MoV steel irradiated with a zirconium ion beam were studied by optical microscopy, scanning electron microscopy, and micro- and nanoindentation. It is shown that the modification covers the entire cross-section of the irradiated specimens to a depth of 1 mm. The data on irradiation-induced structural changes are used to interpret the changes in mechanical properties of the irradiated specimens under static and cyclic loading. Particular attention is given to analysis of strain estimation by the digital image correlation method.     

Spin density matrix of the $$\omega $$ in the reaction $${\bar{p}p}\,\rightarrow \,\omega \pi ^0$$p¯p→π0

The spin density matrix of the \(\omega \) has been determined for the reaction \({\bar{p}p}\,\rightarrow \,\omega \pi ^0\) with unpolarized in-flight data measured by the Crystal Barrel LEAR experiment at CERN. The two main decay modes of the \(\omega \) into \(\pi ^0 \gamma \) and \(\pi ^+ \pi ^- \pi ^0\) have been separately analyzed for various \({\bar{p}}\)momenta between 600 and 1940 MeV/c. The results obtained with the usual method by extracting the matrix elements via the \(\omega \) decay angular distributions and with the more sophisticated method via a full partial wave analysis are in good agreement. A strong spin alignment of the \(\omega \) is clearly visible in this energy regime and all individual spin density matrix elements exhibit an oscillatory dependence on the production angle. In addition, the largest contributing orbital angular momentum of the \({\bar{p}p~}\)system has been identified for the different beam momenta. It increases from \(L^{max}_{{\bar{p}p~}}\) \(=\) 2 at 600 MeV/c to \(L^{max}_{{\bar{p}p~}}\) \(=\) 5 at 1940 MeV/c.     

Synthesis and electrochemical properties of P2-Na<Subscript>2/3</Subscript>Ni<Subscript>1/3</Subscript>Mn<Subscript>2/3</Subscript>O<Subscript>2</Subscript>

The pure phase P2-Na_2/3Ni_1/3Mn_2/3O₂ was synthesized by a solid reaction process. The optimum calcination temperature was 850 °C. The as-prepared product delivered a capacity of 158 mAh g^?1 in the voltage range of 2–4.5 V, and there was a phase transition from P2 to O2 at about 4.2 V in the charge process. The P2 phase exhibited excellent intercalation behavior of Na ions. The reversible capacity is about 88.5 mAh g^?1 at 0.1 C in the voltage range of 2–4 V at room temperature. At an elevated temperature of 55 °C, it could remain as an excellent capacity retention at low current rates. The P2-Na_2/3Ni_1/3Mn_2/3O₂ is a potential cathode material for sodium-ion batteries.     

Facile and surfactant-free synthesis of SnO<Subscript>2</Subscript>-graphene hybrids as high performance anode for lithium-ion batteries

A facile microwave-assisted ethylene glycol method is developed to synthesize the SnO₂ nanoparticles dispersed on or encapsulated in reduced graphene oxide (SnO₂-rGO) hybrids. The morphology, structure, and composition of SnO₂-rGO are investigated by scanning electron microscopy, transmission electron microscope, thermo-gravimetric analyzer, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. The electrochemical performance of SnO₂-rGO as anode materials for lithium-ion batteries was tested by cyclic voltammetry, galvanostatic charge–discharge cycling, and rate capability test. It is found that the SnO₂ nanoparticles with a uniform distribution have p-type doping effect with rGO nanosheets. The as-prepared SnO₂-rGO hybrids exhibit remarkable lithium storage capacity and cycling stability, and the possible mechanism involved is also discussed. Their capacity is 1222 mAhg^?1 in the first cycle and maintains at 700 mAhg^?1 after 100 cycles. This good performance can be mainly attributed to the unique nanostructure, good structure stability, more space for volume expansion of SnO₂, and mass transfer of Li⁺ during cycling.     

Dinitrile compound containing ethylene oxide moiety with enhanced solubility of lithium salts as electrolyte solvent for high-voltage lithium-ion batteries

A dinitrile compound containing ethylene oxide moiety (4,7-dioxa-1,10-decanedinitrile, NEON) is synthesized as an electrolyte solvent for high-voltage lithium-ion batteries. The introduction of ethylene oxide moiety into the conventional aprotic aliphatic dinitrile compounds improves the solubility of lithium hexafluorophosphate (LiPF₆) used commercially in the lithium-ion battery industry. The electrochemical performances of the NEON-based electrolyte (0.8 M LiPF₆?+?0.2 M lithium oxalyldifluoroborate in NEON:EC:DEC, v:v:v?=?1:1:1) are evaluated in graphite/Li, LiCoO₂/Li, and LiCoO₂/graphite cells. Half-cell tests show that the electrolyte exhibits significantly improved compatibility with graphite by the addition of vinylene carbonate and lithium oxalyldifluoroborate and excellent cycling stability with a capacity retention of 97 % after 50 cycles at a cutoff voltage of 4.4 V in LiCoO₂/Li cell. A comparative experiment in LiCoO₂/graphite full cells shows that the electrolyte (NEON:EC:DEC, v:v:v?=?1:1:1) exhibits improved cycling stability at 4.4 V compared with the electrolyte without NEON (EC:DEC, v:v?=?1:1), demonstrating that NEON has a great potential as an electrolyte solvent for the high-voltage application in lithium-ion batteries.