Silicon-induced ene-type reaction in the thermal conversion of enolates to beta-silyl enones with molecular dioxygen

Reaction of alkyl, acetoxy, and silyl enol ethers of 3-(organosilyl)cyclohexanone with molecular dioxygen in toluene at 110 degrees C produced the corresponding conjugated enones in yields up to 88% yield. The reaction of the same type failed on replacement of the silyl group at the C-3 position with an isopropyl group. These results indicate the existence of an unprecedented silicon-induced ene-type reaction. Its reaction mechanism, generality, limitations, and exceptions are discussed.     

Dynamic liquid phase nanoextraction coupled to GC/MS for rapid analysis of methoxyacetophenone and anisaldehyde isomers in urine

This study introduces a novel extraction technique in the nanoscale and challenges the limits of solvent extraction in the GC/MS using electronic ionization (EI) method for quantitative determination of six methoxyacetophenone (MAP) and anisaldehye (AAH) isomers in one drop of water and urine. This technique is termed as dynamic liquid phase nanoextraction (DLPNE). The optimum parameters for the DLPNE technique were: selection of solvent, toluene; sampling volume, 0.44 microL; dwell time, 2 s; number of sampling, 15; extraction time, 1.5 min; volume of extraction solvent, 60 nL; and no salt addition. The LODs for this technique were 5-20 ng/mL. The RSDs were in the range of 9.7-12.6% (n = 6). The linear dynamic range of the calibration curve of DLPNE is from 0.02 to 0.5 microg/mL with correlation coefficient (r(2)) >0.9705. The advantages of the DLPNE technique are rapidity, ease of operation, simple device, and extremely little solvent and sample consumption. This technique was also compared with the static liquid phase nanoextraction (SLPNE) while the SLPNE failed to detect any signal for the six isomers. We believe that this technique can be very useful for the detection of volatile organic compounds in environmental science from microscale of water or it can be applied to clinical or pharmaceutical application such as diagnosis of microamount of urine or blood samples by GC/MS.     

Diastereoselective diaza-Cope rearrangement reaction

Steric effect is used to obtain a highly diastereoselective rearrangement reaction.     

Synthesis and energy-transfer properties of poly(amidoamine) dendrons modified with naphthyl and dansyl groups

Poly(amidoamine) dendrons of 1-3 generations with naphthyl groups at the periphery and a dansyl group at the focal point were synthesized and carefully characterized. Intramolecular energy-transfer properties of these flexible aliphatic-scaffold light-harvesting dendrons were investigated by UV-vis absorption and fluorescence spectroscopy. Efficient energy transfer from the naphthyl groups to the dansyl group occurred for both the first and the second generation dendrons (the energy-transfer efficiency was 94.3% and 76.9%, respectively), whereas the third generation dendron exhibited a low energy-transfer efficiency of 17.8%. The average donor-acceptor distances between the naphthyl and dansyl groups were calculated for different generation dendrons. Different degrees of the backfolding of dendritic branches were used to interpret the different donor-acceptor distances.     

Palladium-catalyzed vinylation of cyclohexenes using a directing-group strategy

Palladium-promoted vinylation of cyclohexenes via employment of a directing-group strategy to yield the coupled vinyl cyclohexenes with excellent regio- and stereoselectivity was studied. Typically, reaction of 2-(cyclohex-2-en-1-yl)-N-tosylacetamide ( 1a ) with (Z)-styryl bromides ( 2 ) gave cis-2-[(E)-styryl]cyclopent-3-en-1-yl-N-tosylacetamides in good to excellent yields. It is noticed that (Z)-styryl moiety was inverted into (E)-form in products. Unfortunately, (E)-styryl bromide substrates were not suitable for this reaction under the condition investigated. Further studies on norbornene system, we found that palladium-catalyzed reaction of endo-N-tosylbicyclo[2.2.1]hept-5-ene-2-carboxamide ( 6 ) with styryl bromides gave the Aza-Heck type products.     

Influence of Potassium Metal-Support Interactions on Dendrite Growth

Combined synchrotron X-ray nanotomography imaging, cryogenic electron microscopy (cryo-EM) and modeling elucidate how potassium (K) metal-support energetics influence electrodeposit microstructure. Three model supports are employed: O-functionalized carbon cloth (potassiophilic, fully-wetted), non-functionalized cloth and Cu foil (potassiophobic, nonwetted). Nanotomography and focused ion beam (cryo-FIB) cross-sections yield complementary three-dimensional (3D) maps of cycled electrodeposits. Electrodeposit on potassiophobic support is a triphasic sponge, with fibrous dendrites covered by solid electrolyte interphase (SEI) and interspersed with nanopores (sub-10 nm to 100 nm scale). Lage cracks and voids are also a key feature. On potassiophilic support, the deposit is dense and pore-free, with uniform surface and SEI morphology. Mesoscale modeling captures the critical role of substrate-metal interaction on K metal film nucleation and growth, as well as the associated stress state.     

Mechanically Activated Solid-State Radical Polymerization and Cross-Linking via Piezocatalysis

Piezocatalysis offers a means to transduce mechanical energy into chemical potential, harnessing physical force to drive redox reactions. Working in the solid state, we show here that piezoelectric BaTiO₃ nanoparticles can transduce mechanical load into a flux of reactive radical species capable of initiating solid state free radical polymerization. Activation of a BaTiO₃ powder by ball milling, striking with a hammer, or repeated compressive loading generates highly reactive hydroxyl radicals (⋅OH), which readily initiate radical chain growth and crosslinking of solid acrylamide, acrylate, methacrylate and styrenic monomers. Control experiments indicate a critical role for chemisorbed water on the BaTiO₃ nanoparticle surface, which is oxidized to ⋅OH via mechanoredox catalysis. The force-induced production of radicals by compressing dry piezoelectric materials represents a promising new route to harness mechanical energy for solid state radical synthesis.     

Co-La-Based Hole-Transporting Layers for Binary Organic Solar Cells with 18.82 % Efficiency

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is a widely used hole transporting layer (HTL) in organic solar cells (OSCs), but its acidity severely reduces the stability of devices. Until now, very few HTLs were developed to replace PEDOT:PSS toward stable and high-performance OSCs. Herein, a new cobalt-lanthanum (Co-La) inorganic system was reported as HTL to show a high conversion efficiency (PCE) of 18.82 %, which is among the top PCEs in binary OSCs. Since electron-rich outer shell of La atom can interact with Co atom to form charge transfer complex, the work function and conductivity of the Co-La system could be simultaneously enhanced compared to Co or La-based HTLs. This Co-La system could also be applied into other OSCs to show high performance. All these results demonstrate that binary Co-La systems as HTL can efficiently tackle the issue in hole transporting and show powerful application in OSCs to replace PEDOT:PSS.     

Templated synthesis of electroactive periodic mesoporous organosilica bridged with oligoaniline

The synthesis and characterization of novel electroactive periodic mesoporous organosilica (PMO) are reported. The silsesquioxane precursor, N,N'-bis(4'-(3-triethoxysilylpropylureido)phenyl)-1,4-quinonene-diimine (TSUPQD), was prepared from the emeraldine base of amino-capped aniline trimer (EBAT) using a one-step coupling reaction and was used as an organic silicon source in the co-condensation with tetraethyl orthosilicate (TEOS) in proper ratios. By means of a hydrothermal sol-gel approach with the cationic surfactant cetyltrimethyl-ammonium bromide (CTAB) as the structure-directing template and acetone as the co-solvent for the dissolution of TSUPQD, a series of novel MCM-41 type siliceous materials (TSU-PMOs) were successfully prepared under mild alkaline conditions. The resultant mesoporous organosilica were characterized by Fourier transform infrared (FT-IR) spectroscopy, thermogravimetry, X-ray diffraction, nitrogen sorption, and transmission electron microscopy (TEM) and showed that this series of TSU-PMOs exhibited hexagonally patterned mesostructures with pore diameters of 2.1-2.8 nm. Although the structural regularity and pore parameters gradually deteriorated with increasing loading of organic bridges, the electrochemical behavior of TSU-PMOs monitored by cyclic voltammetry demonstrated greater electroactivities for samples with higher concentration of the incorporated TSU units.     

外端为偶氮苯基团的聚酰胺-胺树枝状分子对光和H~+的响应行为

合成了1到5代外端修饰有偶氮苯基团的聚酰胺-胺(PAMAM)树枝状分子.H-NMR、FTIR和元素分析等表明得到了目标产物,外端接枝率在70%~90%.结构分析表明经修饰的PAMAM分子在3代和4代之间存在一个结构转变.UV-Vis和H-NMR分析结构显示,在中性条件下,Gn-azo表现出类似于小分子偶氮苯基团的光响应行为.而在酸性条件下,偶氮苯基团的顺反异构转化率较质子化前低.包裹及释放实验表明,虽然G4-azo包裹水杨酸分子的能力弱于G4PAMAM,但它对于客体小分子具有缓释作用,光照使偶氮苯基团发生由反式到顺式的异构转化之后,缓释效应更明显.