Structural and Electronic Effects of Carbon‐Supported PtxPd1−x Nanoparticles on the Electrocatalytic Activity of the Oxygen‐Reduction Reaction and on Methanol Tolerance

We report a systematic investigation on the structural and electronic effects of carbon‐supported Pt_xPd_1?x bimetallic nanoparticles on the oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR) in acid electrolyte. Pt_xPd_1?x/C nanocatalysts with various Pt/Pd atomic ratios (x=0.25, 0.5, and 0.75) were synthesized by using a borohydride‐reduction method. Rotating‐disk electrode measurements revealed that the Pt₃Pd₁/C nanocatalyst has a synergistic effect on the ORR, showing 50 % enhancement, and an antagonistic effect on the MOR, showing 90 % reduction, relative to JM 20 Pt/C on a mass basis. The extent of alloying and Pt d‐band vacancies of the Pt_xPd_1?x/C nanocatalysts were explored by extended X‐ray absorption fine‐structure spectroscopy (EXAFS) and X‐ray absorption near‐edge structure spectroscopy (XANES). The structure–activity relationship indicates that ORR activity and methanol tolerance of the nanocatalysts strongly depend on their extent of alloying and d‐band vacancies. The optimal composition for enhanced ORR activity is Pt₃Pd₁/C, with high extent of alloying and low Pt d‐band vacancies, owing to favorable O? O scission and inhibited formation of oxygenated intermediates. MOR activity also shows structure dependence. For example, Pt₁Pd₃/C with Pt_rich?corePd_rich?shell structure possesses lower MOR activity than the Pt₃Pd₁/C nanocatalyst with random alloy structure. Herein, extent of alloying and d‐band vacancies reveal new insights into the synergistic and antagonistic effects of the Pt_xPd_1?x/C nanocatalysts on surface reactivity.     

Dynamics of Excess‐Electron Transfer through Alternating Adenine:Thymine Sequences in DNA

This paper presents the results of an investigation into the sequence‐dependent excess‐electron transfer (EET) dynamics in DNA, which plays an important role in DNA damage/repair. There are many published studies on EET in consecutive adenine:thymine (A:T) sequences ( Tn ), but those in alternating A:T sequences ( ATn ) remain limited. Here, two series of functionalized DNA oligomers, Tn and ATn , were synthesized with a strongly electron‐donating photosensitizer, a trimer of ethylenedioxythiophene ( 3 E ), and an electron acceptor, diphenylacetylene ( DPA ). Laser flash photolysis experiments showed that the EET rate constant of AT3 is two times lower than that of T3 due to the lack of π‐stacking of Ts in AT3 . Thus, it was indicated that excess‐electron hopping is affected by the interaction between LUMOs of nucleotides.     

Understanding the stabilization of liquid-phase-exfoliated graphene in polar solvents: molecular dynamics simulations and kinetic theory of colloid aggregation

Understanding the solution-phase dispersion of pristine, unfunctionalized graphene is important for the production of conducting inks and top-down approaches to electronics. This process can also be used as a higher-quality alternative to chemical vapor deposition. We have developed a theoretical framework that utilizes molecular dynamics simulations and the kinetic theory of colloid aggregation to elucidate the mechanism of stabilization of liquid-phase-exfoliated graphene sheets in N-methylpyrrolidone (NMP), N,N'-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), γ-butyrolactone (GBL), and water. By calculating the potential of mean force between two solvated graphene sheets using molecular dynamics (MD) simulations, we have found that the dominant barrier hindering the aggregation of graphene is the last layer of confined solvent molecules between the graphene sheets, which results from the strong affinity of the solvent molecules for graphene. The origin of the energy barrier responsible for repelling the sheets is the steric repulsions between solvent molecules and graphene before the desorption of the confined single layer of solvent. We have formulated a kinetic theory of colloid aggregation to model the aggregation of graphene sheets in the liquid phase in order to predict the stability using the potential of mean force. With only one adjustable parameter, the average collision area, which can be estimated from experimental data, our theory can describe the experimentally observed degradation of the single-layer graphene fraction in NMP. We have used these results to rank the potential solvents according to their ability to disperse pristine, unfunctionalized graphene as follows: NMP ≈ DMSO > DMF > GBL > H(2)O. This is consistent with the widespread use of the first three solvents for this purpose.     

Structure–Performance Correlations of Organic Dyes with an Electron‐Deficient Diphenylquinoxaline Moiety for Dye‐Sensitized Solar Cells

The high performances of dye‐sensitized solar cells (DSSCs) based on seven new dyes are disclosed. Herein, the synthesis and electrochemical and photophysical properties of a series of intentionally designed dipolar organic dyes and their application in DSSCs are reported. The molecular structures of the seven organic dyes are composed of a triphenylamine group as an electron donor, a cyanoacrylic acid as an electron acceptor, and an electron‐deficient diphenylquinoxaline moiety integrated in the π‐conjugated spacer between the electron donor and acceptor moieties. The DSSCs based on the dye DJ104 gave the best overall cell performance of 8.06 %; the efficiency of the DSSC based on the standard N719 dye under the same experimental conditions was 8.82 %. The spectral coverage of incident photon‐to‐electron conversion efficiencies extends to the onset at the near‐infrared region due to strong internal charge‐transfer transition as well as the effect of electron‐deficient diphenylquinoxaline to lower the energy gap in these organic dyes. A combined tetraphenyl segment as a hydrophobic barrier in these organic dyes effectively slows down the charge recombination from TiO₂ to the electrolyte and boosts the photovoltage, comparable to their Ru^II counterparts. Detailed spectroscopic studies have revealed the dye structure–cell performance correlations, to allow future design of efficient light‐harvesting organic dyes.     

Facile synthesis of 9-substituted 9-deazapurines as potential purine nucleoside phosphorylase inhibitors

A facile synthesis of 9-substituted 9-deazapurines as potential inhibitors of purine nucleoside phosphorylase has been achieved by the direct Friedel-Crafts aroylation or arylmethylation of 9-deazapurines using trifluoromethanesulfonic acid as catalyst. The aroylated 9-deazapurines could be transformed into the corresponding 9-aryimethyl derivatives by the Wolff-Kishner reaction. A novel synthesis of 9-deazahypoxanthine was also developed by treatment of 4-hydroxy-5-phenylazo-6-methylpyrimidin-2-thione with triethyl orthoformate in trifluoroacetic acid (TFA) to yield 8-oxo-7H-2-phenylpyrimido[5,4-c]pyridazin-6-thione followed by Raney nickel reduction.     

Synthesis of aryl- and heteroaryl[a]pyrrolo[3,4-c]carbazoles

Synthesis of aryl- and hetero[a]pyrrolo[3,4-c]carbazoles by photochemical oxidation and Heck cyclization are described. Photochemical oxidation of 2-naphthyl indolyl maleimide affords two different carbazole regioisomers, depending on the reaction conditions. The regiochemistry of the cyclization can be controlled using the Heck reaction.     

Epoxidized HTPB‐based Polyurethane Membranes for Pervaporation Separation

Polyurethane (PU) solutions were synthesized with hydroxyl‐terminated polybutadiene (HTPB), 4,4′‐dicyclohexylmethane diisocyanate (H₁₂MDI) and 1,4‐butanediol (1,4‐BD). PU membranes were prepared by dry/wet method from PU solutions, while epoxidized membranes were prepared by dipping the dried PU membranes into a mixture of formic acid and hydrogen peroxide for the reaction with C=C double bonds of HTPB soft segments. The extent of epoxidized reaction, which forms epoxide or ether groups, on the PU membranes was quantified by the absorbance ratio of the epoxide group to the butadiene group (A_epoxide/A_C=C ratio). Effect of epoxidized time on the polymer composition, morphology, and polarity of these HTPB‐based PUs was investigated by FTIR‐ATR, DMA and contact angle meter. Both permeabilities and permselectivity of a water/ethanol mixture, which is measured by pervaporation method, were improved through the epoxidation of PU membranes.     

Solid Polymer Electrolyte Based on Pluronic P123 Triblock Copolymer‐Siloxane Organic‐Inorganic Hybrid

A novel organic‐inorganic hybrid electrolyte based on poly(ethylene oxide)‐poly(propylene oxide)‐poly(ethylene oxide) triblock copolymer (Pluronic P123) complexed with LiClO₄ via the co‐condensation of an epoxy trialkoxysilane and tetraethylorthosilicate was prepared. Characterization was made by a variety of techniques including powder X‐ray diffraction, AC impedance, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and multinuclear solid state NMR measurements. The hybrid with [O]/[Li] = 16 exhibited a mesophase with a certain degree of ordering, which arose by the self‐assembly of P123 with the silica network. The P123 triblock copolymer acts as a structure‐directing surfactant to organize with silica networks and as a polymer matrix to dissolve alkali lithium salts as well. The DSC results indicated the formation of transient crosslinking between Li⁺ ions and the ether oxygens of the EO and PO segments, resulting in an increase the T_g with increasing salt concentrations. Variable temperature ⁷Li‐{¹H} MAS NMR spectra revealed the presence of two different local environments for lithium cations, probably due to the lithium cations in the polymer‐rich domain and in the silica‐rich domain, respectively. A combination of XRD and conductivity results suggests that the drastically enhanced conductivity for the ordered hybrid electrolyte is closely related to the formation of mesophase, which may provide unique Li⁺ conducting pathways.     

Determination of theophylline in tea and drug formulation using a Nafion(R)/lead-ruthenium oxide pyrochlore chemically modified electrode

Square-wave voltammetry was used for the determination of trace amounts of theophylline in tea and drug formulation at a Nafion(R)/lead-ruthenium oxide pyrochlore chemically modified electrode. This chemically modified electrode exhibits a marked enhancement of the current response compared to a bare glassy carbon electrode. The calibration graph for the determination of theophylline was linear up to 100 muM in 0.1 M, pH 3 phosphate solution with a detection limit (S/N=3) of 0.1 muM. The results of 15 successive repetitive measurement-regeneration cycles showed a relative standard deviation of 1.3% for 10 muM theophylline indicating that the electrode renewal gives a good reproducible surface. Quantitative analysis was performed by the standard addition method for the theophylline content in commercially available tea and drug.     

The Synthesis,Characterization and Dehydrogenation of Sigma‐Complexes of BN‐Cyclohexanes

The coordination chemistry of the 1,2‐BN‐cyclohexanes 2,2‐R₂‐1,2‐B,N‐C₄H₁₀ (R₂=HH, MeH, Me₂) with Ir and Rh metal fragments has been studied. This led to the solution (NMR spectroscopy) and solid‐state (X‐ray diffraction) characterization of [Ir(PCy₃)₂(H)₂(η²η²‐H₂BNR₂C₄H₈)][BAr^F₄] (NR₂=NH₂, NMeH) and [Rh(iPr₂PCH₂CH₂CH₂PiPr₂)(η²η²‐H₂BNR₂C₄H₈)][BAr^F₄] (NR₂=NH₂, NMeH, NMe₂). For NR₂=NH₂ subsequent metal‐promoted, dehydrocoupling shows the eventual formation of the cyclic tricyclic borazine [BNC₄H₈]₃, via amino‐borane and, tentatively characterized using DFT/GIAO chemical shift calculations, cycloborazane intermediates. For NR₂=NMeH the final product is the cyclic amino‐borane HBNMeC₄H₈. The mechanism of dehydrogenation of 2,2‐H,Me‐1,2‐B,N‐C₄H₁₀ using the {Rh(iPr₂PCH₂CH₂CH₂PiPr₂)}⁺ catalyst has been probed. Catalytic experiments indicate the rapid formation of a dimeric species, [Rh₂(iPr₂PCH₂CH₂CH₂PiPr₂)₂H₅][BAr^F₄]. Using the initial rate method starting from this dimer, a first‐order relationship to [amine‐borane], but half‐order to [Rh] is established, which is suggested to be due to a rapid dimer–monomer equilibrium operating.