Knapsack-based Algorithms for Designing Cellular Manufacturing Systems

In this paper, we use a 0–1 linear programming model for the machine assignment problem in cellular manufacturing. The formulated machine assignment problem considers many manufacturing factors such as machine utilization cost, cost of intercellular moves, part demand, and operating time capacity. The problem is shown to be NP-complete. Two designing algorithms are proposed to exploit the problem structure of the knapsack problem. Computational experience of the two algorithms is also reported.     

A new fringe carrier method for the determination of displacement derivatives in hologram interferometry

Holographic carrier fringes are produced by rotation of the object beam prior to the second exposure when the object is deformed. It is shown that the local pitch of the carrier is a linear function of displacement derivatives. The local pitch may be directly measured with a microscope or a digitized TV system. The theoretical foundation as well as an experimental demonstration are given in this paper.     

A quasi double-grating grazing incidence pulsed dye laser

Continuous scanning of a 1 GHz pulsed laser line using only one 5-cm grating as an intracavity selective element is obtained from a pulsed dye laser pumped by a Nd: YAG (8 ns-532 nm) laser. Such a single-grating dye laser operates in the same way as a real double-grating grazing incidence laser and provides an appreciable improvement of the resolution (enhancement factor 2), compared with previous grazing incidence ones. The superiority of this laser cavity has been proved for single-longitudinal-mode operation.Laboratoire associé à l'Université de Paris-Sud     

基于液晶体的大错位量散斑相移技术研究

系统地分析了大错位量散斑干涉术测量离面位移的原理,并结合晶体光学理论详细分析液晶体的相移过程．同时从理论上剖析了沃拉斯顿棱镜的错位机理,从而构造出一种新的基于液晶体实现大错位量散斑相移技术的测试系统。采用该检测系统对结构实体混凝土在不同养护时间情况下的力学行为进行测试研究。实验结果揭示：随着养护时间的增加,混凝土结构的力学性能指标也相应增加,但在养护21天后,混凝土结构材料的弹性模量和结构强度都达到某一稳定值(即标准试样在同等养护条件下的实验室测量值)。并且也发现该技术使用方便,检测时受环境的影响小,可以实现现场在线原位实时无损检测,并能够得到非常真实的检测结果,从而可以实现更精确的定量计算。     

Spectral Domain Analysis of Coaxial Cavities

Coaxial cavities are used in high power gyrotrons as the beam-wave interaction structure. Much research has been devoted to their mode selective properties. A coaxial cavity lacks a sharp boundary at its open end, so it has some physical features that can only be observed using a spectral model, such as frequency-dependent field profiles and mode overlapping effects. These properties are important since cold tests are usually conducted in the frequency domain. This study applies the incident/reflected wave boundary condition to the wave equation of a weakly irregular coaxial waveguide. The resistivity of the wall is considered in the analysis. Calculations reveal that the fixed-position spectrum yields an uncertain resonant frequency and quality factor. Although the maximum-field spectrum can uniquely determine the properties of the coaxial cavity, the resonant frequency obtained using the maximum-field spectral model is inconsistent with that obtained using the temporal model. The field-energy spectrum explains the low Q nature of the coaxial cavity. Moreover, resonant frequencies evaluated using the field-energy spectrum agree precisely with those evaluated using the temporal model.     

Tunable diffraction of magnetic fluid films and its potential application in coarse wavelength-division multiplexing

When an external magnetic field is applied parallel to the film surface of a magnetic fluid film, a high-quality one-dimensional periodic chain structure is formed when the field strength reaches a certain level. With a periodic chain structure in the magnetic fluid film, an incident light is diffracted onto the magnetic thin film. The results show that the one-dimensional periodic chain structure in the magnetic fluid film can serve as an optical grating. Further investigations reveal the feasibility of developing tunable coarse wavelength-division multiplexing by utilizing a periodic chain structure.     

Improvement of <Emphasis Type="Italic">n</Emphasis>-ZnO/<Emphasis Type="Italic">p</Emphasis>-Si photodiodes by embedding of silver nanoparticles

The photo-current of n-ZnO/p-Si heterojunction photodiodes was improved by embedding Ag nanoparticles in the interface (ZnO/nano-P_Ag/p-Si), and the ratio between photo- and dark-current increased by about three orders more than that of a n-ZnO/p-Si specimen. The improvement in the photo-current resulted from the light scattering of embedded Ag nanoparticles. The I–V curve of n-ZnO/p-Si degraded after thermal treatment (A-ZnO/p-Si) because the silicon robbed the oxygen from ZnO to form amorphous silicon dioxide and left an oxygen vacancy. Notably, the properties of ZnO/nano-P_Ag/p-Si were better in the time-dependent photoresponse under 10 V bias. Ag nanoparticles (15–20 nm) scattered the UV light randomly and increased the probability for the absorption of ZnO to enhance the properties of the photodiode.     

Analytical study of an active piezoelectric absorber on vibration attenuation of a plate

The attenuation of the transverse vibration of a plate, subjected to a harmonic force, is studied. This goal can be achieved by using an active dynamic absorber. The active absorber is made of a pair of piezoelectric sheets, attached to both sides of the plate, and closed electric circuits. One piece of the piezoelectric material provides a sensor for detecting the motion of the plate. Another piece serves as an active dynamic absorber. The equations of motion of the composite plate, including the plate and the piezoelectric material, and the circuit equations of the sensor and the absorber are derived. The displacements of the plate and the currents in the circuits are calculated. The active absorber can successfully attenuate the vibration. The numerical results show that the proposed active absorber can offer more reduction than that using a passive absorber while the absorber is designed to suppress the resonance of a particular vibration mode. Moreover, the active absorber can also reduce the displacements corresponding to other uncontrolled modes. The effects of altering various parameters of the active absorber are studied and discussed.