Resolution of gossypol: Analytical and large-scale preparative HPLC on non-chiral phases

Racemic gossypol is resolved by HPLC of its amino acid ester Schiff's base derivatives on non-chiral columns. This provides a rapid and accurate method for determination of optical purity on a small scale and, combined with hydrolysis and fractional crystallization, for the preparation of pure gossypol enantiomers on a multi-gram scale.     

Design, synthesis, and bioactivity of the first nonsteroidal mimetics of brassinolide

Ten novel compounds, each consisting of two subunits and a linker, were designed with the aid of molecular modeling to resemble the natural steroidal phytohormone brassinolide. The mimetics were synthesized and subjected to the rice leaf lamina inclination bioassay to test for brassinosteroid activity. Most of the mimetics displayed very weak or no bioactivity, but two were strongly active when coapplied with the auxin indole-3-acetic acid (IAA), which synergizes the activity of brassinosteroids. Thus, 1-(4,6 alpha,7 alpha-trihydroxy-5,6,7,8-tetrahydronaphthyl)-2-(6 alpha',7 alpha'-dihydroxy-5',6',7',8'-tetrahydronaphthyl)ethyne (4) and (E)-1,2-bis[trans-(4a alpha,8a beta)-4-oxo-6 alpha,7 alpha-dihydroxy-4a,5,6,7,8,8a-hexahydro-(3H)-naphthyl]ethylene (11) showed exceptional activity at doses as low as 0.01 ng and 0.001 ng/plant, respectively. These compounds are the first biologically active nonsteroidal brassinolide mimetics.     

Local atomic structure of partially ordered NiMn in NiMn/NiFe exchange coupled layers: 1. XAFS measurements and structural refinement

The local atomic structure of the Mn in NiMn/NiFe exchange coupled films was investigated using Mn K-edge extended X-ray absorption fine structure (EXAFS) measurements to elucidate the possible correlation between the coercivity that can occur even in samples that display no signs of NiMn L1(0) ordering in diffraction patterns and such ordering on a length scale below the diffraction limit. Raising the substrate growth temperature from 3 to 200 degrees C increases the extent of L1(0) ordering in the NiMn pinning layer and the associated coercivity. A short-range order parameter (S(SRO)) was derived from EXAFS data for comparison with the long-range order parameter (S(LRO)) obtained from the X-ray diffraction measurements. Analogous to S(LRO), S(SRO) increases in tandem with the pinning layer coercivity, implying the presence of nanometer-scale ordered clusters at the beginning stages of macroscopic L1(0) phase formation that apparently foster antiferromagnetism despite their small size. The behavior of the EXAFS, especially the contributions of the more distant shells, also suggests that the overall structure in materials that are not fully L1(0)-ordered is more accurately described as locally ordered, magnetically ordered, incoherent nanodomains of the L1(0) phase separated by locally disordered, strained, interdomain regions that globally average to the fcc lattice with little or no local fcc structure present. The constraints on the sizes and other characteristics of these domains were explored by examining the diffraction patterns calculated for several two-dimensional analogue structures. These demonstrated that one of the most important structural features in the development of a two-phase diffraction pattern was the presence of dislocations in response to the elastic strain at the interfaces between domains where the accumulated expitaxial mismatch was greater than half of the bond length that rendered the domains incoherent with respect to each other.     

The decomposition of ethanol vapour by infrared radiation from a pulsed HF-laser

The decomposition of ethanol vapour induced by infrared radiation from a pulsed HF-laser has been studied as a function of pressure. At high pressures, above 10 torr, the main primary processes appear to be:C₂H₅OH → H₂ + CH₃CHO,C₂H₅OH → C₂H₄ + H₂O,C₂H₅OH → CH₃ + CH₂OHin a ratio of 3:2:1 which is independent of pressure. At low pressures the process yielding C₂H₄ and H₂O becomes dominant. The results suggest that the high pressure behaviour involves a “thermal” decomposition with collisional processes dominating, whereas at low pressures the decomposition is due to multiple photon absorption which at the lowest pressures approaches a collision-free unimolecular decomposition.     

Remarkable activity of a novel cyclic seleninate ester as a glutathione peroxidase mimetic and its facile in situ generation from allyl 3-hydroxypropyl selenide

1,2-Oxaselenolane Se-oxide is a novel cyclic seleninate ester that functions as a remarkably efficient glutathione peroxidase mimetic by catalyzing the reduction of tert-butyl hydroperoxide to tert-butyl alcohol in the presence of benzyl thiol. The seleninate ester can be conveniently generated in situ by oxidation of allyl 3-hydroxypropyl selenide with tert-butyl hydroperoxide. Its catalytic activity surpasses that of several other known GPx mimetics containing cyclic selenenamide structures, which were also tested for comparison.     

Determination of cadmium by flow injection-chemical vapor generation-atomic absorption spectrometry

A method was developed for the generation of a "cold vapor" of cadmium by means of flow injection-chemical vapor generation from aqueous samples, the determination being conducted with an atomic absorption spectrometer (Pyrex glass T-cell). Several gas-liquid separator designs, atomizer designs, and the effect of several reagents previously reported as sensitivity enhancers (including cobalt, nickel, thiourea and didodecyl-dimethylammonium bromide) were investigated. The limit of detection, calculated as the concentration giving a signal equal to three times the standard deviation of the blank, was 16 ng L(-1), and the relative standard deviation was 1.4% for a concentration of 2 microg L(-1) and 3.8% for 0.1 microg L(-1). The addition of nickel and thiourea to the samples provided improved tolerance to the interference of coexisting ions. Two NIST certified reference materials, Montana Soil and Apple Leaves (respectively containing 41.7+/-0.25 mg kg(-1) Cd and 0.013+/-0.002 mg kg(-1) Cd) were accurately analyzed. The interference of lead was overcome by coprecipitation with barium sulfate, and the experimental values obtained were 41+/-1 mg kg(-1) Cd and 0.013+/-0.002 mg kg(-1) Cd, respectively.     

Selenosulfonation of acetylenes. Substitution reactions of β-(phenylseleno)vinyl sulfones with organocuprates

β-(Phenylseleno)vinyl sulfones are readily available from the selenosulfonation of acetylenes and undergo efficient, stereoselective substitution of the phenylseleno moiety by the alkyl group of alkyl (phenylseleno) cuprates.     

Complexes of a dianionic bis(diphosphinomethanide) with lithium, sodium, potassium and zirconium. Effect of substitution on the Schlenk dimerisation of vinylidene phosphines

The vinylidene phosphine (Pr(n)(2)P)(2)C=CH(2) (1) undergoes Schlenk dimerisation on treatment with an excess of any of the alkali metals Li, Na or K to give the butane-1,4-diide complexes [(L)M{(Pr(n)(2)P)(2)CCH(2)}](2)[(L)M =(THF)(2)Li (6), (THF)(3)Na (7b), (DME)(2)K (8b)], after recrystallisation. Whereas the reaction between the analogous phenyl derivative (Ph(2)P)(2)C=CH(2) and K results in cleavage of a P-C bond, 1 reacts smoothly with K to give 8, with no evidence for P-C cleavage. Compound 6 is an excellent ligand transfer reagent: metathesis reactions between either 6 or its phenyl analogue [(THF)(2)Li{(Ph(2)P)(2)CCH(2)}](2) (2) and two equivalents of Cp(2)ZrCl(2) in THF give the corresponding dinuclear zirconocene derivatives [Cp(2)Zr(Cl){(R(2)P)(2)CCH(2)}](2) in good yields [R = Ph (11), Pr(n)(12)]. Compounds 6, 7b, 8b, 11 and 12 have been characterised by multi-element NMR spectroscopy and, where possible, by elemental analysis; compounds 6, 7b, 11 and 12 have additionally been characterised by X-ray crystallography.     

Aromatic derivatives and tellurium analogues of cyclic seleninate esters and spirodioxyselenuranes that act as glutathione peroxidase mimetics

[Reaction: see text]. Several novel organoselenium and tellurium compounds were prepared and evaluated as mimetics of the selenoenzyme glutathione peroxidase, which protects cells from oxidative stress by reducing harmful peroxides with the thiol glutathione. The compounds were tested for catalytic activity in a model system wherein tert-butyl hydroperoxide or hydrogen peroxide were reduced with benzyl thiol and the rate of the reaction was measured by monitoring the formation of dibenzyl disulfide. Thus, aromatic derivatives 19, 22, 24, and 25 proved to be inferior catalysts compared to the parent cyclic seleninate ester 14 and spirodioxyselenurane 16. In the case of 19 and 22, this was the result of their rapid conversion to the relatively inert selenenyl sulfides 31 and 32, respectively. In general, hydrogen peroxide was reduced faster than tert-butyl hydroperoxide in the presence of the selenium-based catalysts. The cyclic tellurinate ester 27 and spirodioxytellurane 29 proved to be superior catalysts to their selenium analogues 14 and 16, respectively, resulting in the fastest reaction rates by far of all of the compounds we have investigated to date. Oxidation of 29 with hydrogen peroxide produced the unusual and unexpected peroxide 33, in which two hypervalent octahedral tellurium moieties are joined by ether and peroxide bridges. The structure of 33 was confirmed by X-ray crystallography. Although 33 displayed strong catalytic activity when tested independently in the model system, its relatively slow formation from the oxidation of 29 rules out its intermediacy in the catalytic cycle of 29.