Total synthesis of ingenol

A total synthesis of the biologically important diterpene ingenol has been completed. Ring-closing olefin metathesis was used to construct the strained "inside-outside" tetracyclic skeleton, and a series of diastereoselective reactions were employed to complete the synthesis. Another naturally occurring ingenane, 20-deoxyingenol, has also been prepared.     

Preparation of nanosized TiO2 supported on activated alumina by a sonochemical method: observation of an increased photocatalytic decolourisation efficiency

Nanosized TiO₂ supported on activated alumina was prepared using a sonochemical method. To prepare this supported material, direct immersion horn and cup horn ultrasonic systems were used. The efficiency of the sonochemical coating process was determined by UV photodecolourisation of the aqueous methyl orange solution. It was found that TiO₂ supported on activated alumina prepared by the sonochemical method gave the maximum decolourisation efficiency. In that method itself, direct immersion horn gave a higher photodecolourisation activity as compared to the cup horn. The obtained results suggest that the direct immersion horn results in uniform, as well as a maximum number of TiO₂ particles to be adsorbed on an activated alumina surface.     

Slipping of a histidine improved the peroxidase activity of a de novo designed polypeptide packing an iron porphyrin

Polypeptides with two histidines and an iron porphyrin (1H⁴⁰-7H⁴⁶) were synthesized with a variety of positions of a histidine. In 4H⁴³, histidine (H⁴³) was in the hydrophobic region of an α-helix. The other polypeptides were of slightly or substantially distorted conformation. In the pH 7.2 buffer solution, two histidines of the polypeptide coordinated the iron porphyrin regardless of their positions. Some polypeptides (1H⁴⁰, 3H⁴², and 5H⁴⁴) showed an enhanced catalytic activity in the peroxidase reaction using cumene hydroperoxide compared to that of 4H⁴³, whereas some polypeptides (2H⁴¹ and 6H⁴⁵) were ineffective catalysts. The distortion of the peptide conformation by the addition of MeOH was also effective for the peroxidase reaction.     

Three novel diepoxy tetrahydrochromones from agarwood artificially produced by intentional wounding

Three novel diepoxy tetrahydrochromones, oxidoagarochromones A (1), B (2), and C (3), were isolated from agarwood artificially produced by intentional wounding of Aquilaria crassna. Inductive production of these compounds was also confirmed at the early stage of wounding in A. sinensis and A. crassna. These diepoxy tetrahydrochromones would play an important role in understanding the biosynthesis of chromone derivatives in agarwood.     

A Pd(II)-hydroxyporphycene: synthesis, characterization, and photoinduced proton-coupled electron transfer

A Pd(II) complex, Pd(TPrPc-OH) (1, TPrPc-OH = 9-hydroxy-2,7,12,17-tetrapropylporphycenato dianion), has been synthesized and characterized. ¹H NMR spectroscopy revealed that compound 1 exists as its enol form in solution. The H atom of the hydroxy group in 1 was exchanged with deuterium on addition of ethanol-d ₆. UV–visible spectra showed a red shift of the Q band of 1 in THF compared with that of the acetoxy derivative Pd(TPrPc-OAc) (2, TPrPc-OAc = 9-acetoxy-2,7,12,17-tetrapropylporphycenato dianion). The pK _a value of the hydroxy group in 1 was determined, by means of a UV–visible titration experiment, to be 10.56. A cyclic voltammogram of 1 in a mixture of THF and Britton–Robinson buffered aqueous solution revealed one-electron and one-proton coupled transfer in the oxidation process in the pH range from 2.7 to 10.5, which was identified by pH-varying experiments and the Pourbaix diagram. Transient absorption spectroscopy revealed that an electron-transfer reaction occurred from the triplet excited-state of 1 to 2,3,5,6-tetramethyl-1,4-benzoquinone (duroquinone, DQ) upon pulse laser irradiation at 532 nm. Such an intermolecular photoinduced electron-transfer reaction was not observed between the Ni analog, Ni(TPrPc-OH), and DQ. The reaction rate constant, k _q, was indicative of a kinetic isotope effect with k _q(H)/k _q(D) = 1.7, supporting the belief that the exited-state electron transfer from 1 to DQ is accompanied by proton transfer.     

Improved synthesis of (R)-7-hydroxycarvone from (S)-α-pinene

A three-step synthesis of (R)-7-hydroxycarvone (1), which is anticipated to be a valuable building block for the versatile preparation of natural products, is described. Optimization of the reaction conditions for photooxygenation and migration of (S)-α-pinene 2, tetrapropylammonium perruthenate (TPAP) oxidation of the generated alcohol, and a subsequent ring-opening reaction in the presence of Cu(OTf)₂ led to the synthesis of 1 with good reproducibility. The desired product 1 was thus obtained in 46% yield over three steps.     

Nonylphenol Polyethoxylates Degraded by Three Different Wavelengths of UV and Their Genotoxic Change—Detected by Generation of γ‐H2AX

UV rays in sunlight are an important factor in the degradation of chemicals. In this study, we investigated the degradation of nonionic surfactants, nonylphenol polyethoxylates (NPEOs) with 10 or 70 ethylene oxide (EO) units using UVA, B and C, and their genotoxic change based on phosphorylation of histone H2AX (γ‐H2AX), a marker of DNA damage. NPEOs were degraded dependent on the energy of UV, that is, UVC having the highest energy was most effective, whereas UVA having the lowest energy caused little change. The EO side chain of NPEO(70) was broken near the benzene ring by UV, producing NPEOs with a shortened EO chain (around 10 units). The generation of γ‐H2AX reflected the pattern of degradation; shortening of the EO chain changed NPEO(70) into an inducer for γ‐H2AX, and degradation of NPEO(10) attenuated the genotoxicity. The γ‐H2AX generated by NPEO(10) and UV‐degraded NPEO(70) was independent of the cell cycle. The formation of DNA double strand breaks detected by gel electrophoresis was consistent with the results for γ‐H2AX. These results suggested that UV rays can make NPEOs harmless or genotoxic according to the degradation of the EO side chain, the effects being dependent on wavelength.     

Regioselective Alkylation of Thiazolylsulfonamides: Direct and Efficient Synthesis of 3‐Alkylthiazolidene Derivatives

Various N‐3‐alkylated thiazolidenesulfonamide derivatives were efficiently prepared by the direct endo‐selective alkylation of thiazolylsulfonamides. The effects of different bases and solvents were investigated, and the NaH–THF combination was found to be the most effective at conferring high yields and endo‐selectivity.     

Structural determination of carvone, a component of spearmint, by means of gas electron diffraction augmented by theoretical calculations

The molecular structure and conformation of carvone, a compound with a minty odor, were investigated by means of gas electron diffraction supported by theoretical calculations. Electron diffraction patterns were recorded by heating the nozzle up to 128 °C to obtain enough scattering intensity. The infrared spectrum was also measured by using an absorption cell with a path length of 10 m. The obtained molecular scattering intensities were analyzed with the aid of theoretical calculations and infrared spectroscopy. It was revealed that the experimental data are well reproduced by assuming that carvone consists of a mixture of three conformers that have the isopropenyl group in the equatorial position and mutually differ in the torsional angle around the single bond connecting the ring and the isopropenyl group. It was also found that the puckering amplitude of the ring of carvone is close to those of menthol and isomenthol, a minty compound and its nonminty isomer. The determined structural parameters (r_g and ∠_α) of the most abundant conformer of carvone are as follows: 〈r(C-C)〉=1.520(3) Å; 〈r(CC)〉=1.360(5) Å; r(CO)=1.225(5) Å; 〈r(C-H)〉=1.104(4)Å; 〈∠CC-C〉=121.1(5)°; 〈∠C-C-C〉=110.4(5)°; ∠C-CO-C=117.1(14)°; 〈∠C-C-H〉=111.1(13)°. Angle brackets denote average values and parenthesized values are the estimated limits of error (3σ) referring to the last significant digit.     

Depolymerization of poly(2,6-dimethyl-1,4-phenylene oxide) under oxidative conditions

Depolymerization of an engineering plastic, poly(2,6-dimethyl-1,4-phenylene oxide) (PPO), was accomplished by using 2,6-dimethylphenol (DMP) under oxidative conditions. The addition of an excess amount of DMP to a solution of PPO in the presence of a CuCl/pyridine catalyst yielded oligomeric products. When PPO (M(n)=1.0x10(4), M(w)/M(n)=1.2) was allowed to react with a sufficient amount of DMP, the molecular weight of the product decreased to M(n)=4.9x10(2) (M(w)/M(n)=1.5). By a prolonged reaction with the oxidant, the oligomeric product was repolymerized to produce PPO essentially identical to the starting material, making the oligomer useful as a reusable resource. During the depolymerization reaction, an intermediate phenoxyl radical was observed by ESR spectroscopy. Kinetic analysis showed that the rate of the oxidation of PPO was about 10 times higher than that of DMP. These results show that a monomeric phenoxyl radical attacks the polymeric phenoxyl to induce the redistribution via a quinone ketal intermediate, leading to the substantial decrease in the molecular weight of PPO, which is much faster than the chain growth.