Synthesis and crystallization behavior of rigid copolyesters with biphenyl‐4,4′‐dicarboxylate and 2,6‐naphthalenedicarboxylate in the main chain

Structurally rigid copolyester thermoplastics were synthesized from 1,4‐cyclohexanedimethanol and the diesters dimethyl biphenyl‐4,4′‐dicarboxylate and dimethyl 2,6‐naphthalenedicarboxylate (DMN) via conventional melt transesterification. Conventional differential scanning calorimetry (CDSC) showed all compositions to exhibit multiple endotherms upon heating. Wide‐angle X‐ray diffraction analysis showed copolyester compositions to exhibit the crystalline structure of either the homopolyester Poly(1,4‐cyclohexylenedimethylene 2,6‐naphthalate) (PCN) or the homopolyester Poly(1,4‐cyclohexylenedimethylene 4,4′‐bibenzoate) (PCB), but not both simultaneously. Further thermal analysis using CDSC and fast DSC investigated the origin of the multiple endotherm behavior. While three endotherms are observed for low heating rates, the upper two endotherms appear to merge at heating rates about 1–5 °C s^?1 and a single endotherm remains above heating rates about 10–50 °C s^?1. While the behavior of the upper two endotherms is undeniably consistent with the mechanism of melting–recrystallization–remelting (MRR), we suggest that the low endotherm is likely associated with the melting of constrained secondary crystals, although MRR effects cannot be ruled out. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 973–980     

Validation of an analytical method to quantify the permeation and penetration of flurbiprofen into human pharynx tissue

The aim of this investigation was to develop receiver and extraction fluids, and subsequently validate an analytical method to quantify the permeation and penetration of flurbiprofen into human pharynx tissue using a Franz diffusion cell. The solubility and stability of flurbiprofen in a suitable receiver fluid, and a suitable extraction method and fluid to recover and quantitate flurbiprofen from human pharynx tissue, were investigated using high‐performance liquid chromatography (HPLC). The potential interference of human pharynx tissue in the receiver fluid was also investigated. The HPLC analytical method was successfully validated according to current guidelines. The final receiver fluid demonstrated sufficient solubility and stability, and the extraction method and fluid resulted in >95% recovery of flurbiprofen following exposure to human pharynx tissue. The lower limit of quantitation of flurbiprofen was 0.045 μg/mL in both the receiver and extraction fluids. There was no interference of the human pharynx tissue with the HPLC method. This investigation validated an analytical method for quantitating flurbiprofen, and determined a suitable receiver fluid and extraction method and fluid, which can be used to investigate the permeation and penetration of flurbiprofen through human pharynx tissue using the Franz diffusion cell method.     

Novel parameter estimation techniques for a multi-term fractional dynamical epidemic model of dengue fever

Numerical Algorithms - An inverse problem to identify parameters for the single-term (and multi-term) fractional-order system of an outbreak of dengue fever is considered. Firstly, we propose a...     

LIOUVILLE RESULTS FOR STABLE SOLUTIONS OF QUASILINEAR EQUATIONS WITH WEIGHTS

This paper is devoted to the quasilinear equation ■where p 2,Ω is a(bounded or unbounded) domain of R~N,w_1,w_2 are nonnegative continuous functions and f is an increasing function. We establish a Liouville type theorem for nontrivial stable solutions of the equation under some mild assumptions on Ω,w_1, w_2 and f, which extends and unifies several results on this topic.     

Numerical approximation for a variable-order nonlinear reaction–subdiffusion equation

Fractional reaction–subdiffusion equations are widely used in recent years to simulate physical phenomena. In this paper, we consider a variable-order nonlinear reaction–subdiffusion equation. A numerical approximation method is proposed to solve the equation. Its convergence and stability are analyzed by Fourier analysis. By means of the technique for improving temporal accuracy, we also propose an improved numerical approximation. Finally, the effectiveness of the theoretical results is demonstrated by numerical examples.     

Aerobic Epoxidation of Alkenes Catalysed by Cobalt(II) 1,1,1,5,5,5-Hexafluoroacetylacetonate or Cobalt(II) Benzoylacetonate

The aerobic epoxidation of terminal or electron deficient alkenes with an aldehyde does not proceed with cobalt(II) acetylacetonate but goes to completion with the cobalt(II) benzoylacetonate and cobalt(II) 1,1,1,5,5,5-hexafluoroacetylacetonate complexes.     

Degradation effects in the extraction of antioxidants from birch bark using water at elevated temperature and pressure

Experiments with birch bark samples have been carried to enable a distinction between extraction and degradation effects during pressurised hot water extraction. Two samples, E80 and E180, contained birch bark extracts obtained after extraction at 80 and 180 °C for up to 45 min, respectively. Two other samples, P80 and P180, were only extracted for 5 min at the two temperatures and were thereafter filtered and hydrothermally treated at 80 and 180 °C, respectively. During the latter treatment, samples were collected at different times to assess the stability of the extracted compounds. An offline DPPH (2,2-diphenyl-1-picrylhydrazyl) assay, as well as a high performance liquid chromatographic separation coupled to an electrochemical detector, were used to determine the antioxidant capacity of the processed samples. The results obtained with the different techniques were compared to assess the yield of the extraction and degradation processes. In addition, an online hyphenated system comprising high performance liquid chromatography coupled to diode-array; electrochemical; and tandem mass spectrometric detection (HPLC-DAD-ECD-MS/MS) was used to study the compositions of the extracts in more detail. The results for the samples processed at 80 °C showed that the extraction reached a steady-state already after 5 min, and that the extracted compounds were stable throughout the entire extraction process. Processing at 180 °C, on the other hand, gave rise to partly degraded extracts with a multitude of peaks in both the diode array and electrochemical detectors, and a higher antioxidant capacity compared to for the extracts obtained at 80 °C. It is concluded that HPLC-DAD-ECD is a more appropriate technique for the determination of antioxidants than the DPPH assay. The mass spectrometric results indicate that one of the extracted antioxidants, catechin, was isomerised to its diastereoisomers; (+)-catechin, (−)-catechin, (+)-epicatechin, and (−)-epicatechin.     

Pretransitional behaviour in nematic liquid crystals

A simple (four sites on the water molecule) potential for Cl^-/H₂O has been generated from six gradient calculations. The potential is in reasonable agreement with the extensive SCF calculations of Dacre.     

The effects of season and soil type on microbial degradation of gasoline residues from incendiary devices

The primary task of a fire debris chemist is to determine if there is an ignitable liquid present in a fire debris sample and, if so, to classify it according to its boiling point and carbon number range. However, in organic-rich substrates such as soil, the ignitable liquid residue is subject to microbial degradation due to the ease with which bacteria can metabolize the various hydrocarbons present. This is a rapid process which is problematic in many forensic laboratories as fire debris is often stored for extended periods of time due to case backlog. Although microbial degradation has been studied in laboratory samples, it has not been well-studied in “real-world” samples, which have not only been exposed to microbial degradation but have also suffered the effects of weathering due to the intense heat of the fire. In this work, the effects of microbial degradation of gasoline from an incendiary device have been evaluated over time. In addition to visually monitoring chromatographic changes, this work also utilizes multivariate statistical techniques to simplify the complex data set and elucidate trends that might not otherwise be observed. Results indicate a clear difference between glass samples, which suffered the loss of low boiling compounds, and soil, which suffered the loss of the normal alkanes and lesser substituted aromatics. Also, devices deployed on lawn soil and in the winter season appear to show the most extensive degradation of gasoline. Finally, while the ratio of the C₃-alkylbenzenes is significantly altered in soil samples recovered from large devices, the overall chromatographic profile of gasoline recovered from smaller incendiary devices is significantly lower.

Ultraviolet Reflection Irradiances and Exposures in The Constructed Environment For Horizontal,Vertical and Inclined Surfaces

Ultraviolet (UV) reflection in the urban constructed environment is not well understood for topical issues such as measuring and modeling the received UV exposure due to that UV reflection for outdoor workers. Both predominantly specular and diffuse reflecting surface types have been identified and investigated for the erythemal UV reflection ratio variation due to solar zenith angle and orientation. This paper presents relationships between erythemal UV reflection ratios measured for non‐horizontal and horizontal surfaces, with predominantly specular surface types indicating stronger relationships with solar zenith angles than diffuse reflecting surfaces types. Erythemal UV exposures caused by the same reflecting surface types at three inclinations are also investigated. Non‐horizontal surfaces can increase erythemal UV exposures compared to erythemal UV exposures received from the same horizontal surface by factors of 1.07–1.46 for specific body sites and by 1.01–1.70 for averages of group body sites for zinc aluminium coated steel sheeting.