Quenching of molecular fluorescence on the surface of monolayer-protected gold nanoparticles investigated using place exchange equilibria

The insertion of fluorescently labeled thiols into the protecting self-assembled monolayer on the surface of gold nanoparticles through place exchange reactions and the effects of this insertion on the photophysical properties of the fluorophores are investigated. Analysis of solution-phase fluorescence data using a dynamic equilibrium model yields the equilibrium constant for the place exchange equilibrium, as well as the relative fluorescence brightness of the fluorophores on the particle surface. In all cases we find a significant quenching of the fluorescence, and potential reasons for this quenching are discussed. In the case of these relatively small particles (4.5 nm diameter), the quenching appears to be mainly related to enhanced nonradiative deactivation pathways. The place exchange equilibrium constant reveals a reduced affinity of the fluorescently labeled thiols for insertion into the nonfluorescent alkylthiol monolayer (K(eq) approximately 0.2) compared to unlabeled alkylthiols.     

Synthesis, fluorescence, and two-photon absorption of a series of elongated rodlike and banana-shaped quadrupolar fluorophores: a comprehensive study of structure-property relationships

An extensive series of push-push and pull-pull derivatives was prepared from the symmetrical functionalization of an ambivalent core with conjugated rods made from arylene-vinylene or arylene-ethynylene building blocks, bearing different acceptor or donor end-groups. Their absorption and photoluminescence, as well as their two-photon-absorption (TPA) properties in the near infrared (NIR) region, were systematically investigated to derive structure-property relationships and to lay the guidelines for both spectral tuning and amplification of molecular TPA in the target region. Whatever the nature of the core or of the connectors, push-push systems were found to be more efficient than pull-pull systems, and planarization of the core (fluorene versus biphenyl) always leads to an increase in the TPA cross sections. In contrast, increasing the conjugation length as well as replacement of a phenylene moiety by a thienylene moiety in the conjugated rods did not necessarily lead to increased TPA responses. The present study also demonstrated that the topology of the conjugated rods can dramatically influence the TPA properties. This is of particular interest in terms of molecular engineering for specific applications, as both TPA properties and photoluminescence characteristics can be considerably affected. Thus, it becomes possible to optimize the transparency/TPA and fluorescence/TPA efficiency trade-offs for optical limiting in the red-NIR region (700-900 nm) and for two-photon-excited fluorescence (TPEF) microscopy applications, respectively.     

Synthesis and surface properties of new semi-fluorinated sulfobetaines potentially usable for 2D-electrophoresis

New semi-fluorinated amidosulfobetaines, homologs of hydrocarbon amidosulfobetaines (ASB) commonly used in two-dimensional gel electrophoresis (2DE), were prepared in three steps from 2-F-alkylethyl iodide or F-alkyl iodide. Their synthesis was described and their air-water interface properties were investigated and compared with their perhydrogenated counterpart properties. The influence of the relative lengths of the perfluorinated and hydocarbonated moieties was discussed. 2DE of a rat testicular membrane fraction was performed comparatively using one of these fluorinated sulfobetaines and its hydrocarbon homolog; these preliminary results showed the great potential of the semi-fluorinated sulfobetaines in proteomic analysis.     

Formal total syntheses of aspidosperma alkaloids via a novel and general synthetic pathway based on an intramolecular Heck cyclization

Cyclizations of bicyclic amides via an intramolecular Heck reaction followed by an oxidation reaction generate tricyclic spirocyclohexadienones. From these compounds, tetracyclic ketones can be synthesized to provide useful intermediates for the synthesis of indole alkaloids.     

Influence of chlorine substitution on the self-assembly of zinc phthalocyanine

The adsorption and ordering of zinc phthalocyanine (ZnPc) and octachloro zinc phthalocyanine (ZnPcCl(8)) on an Ag(111) surface is studied in situ by scanning tunneling microscopy under ultrahigh vacuum. Two-dimensional self-assembled supramolecular domains are observed for these two molecules. We show how substituting chlorine atoms for half of the peripheral hydrogen atoms on ZnPc influences the self-assembly mechanisms. While intermolecular interactions are dominated by van der Waals forces in ZnPc molecular networks, ZnPcCl(8) molecular packing undergoes a sequential phase evolution driven by the creation of C-Cl...H-C hydrogen bonds between adjacent molecules. At the end of this evolution, the final molecular assembly involves all possible hydrogen bonds. Our study also reveals the influence of molecule-substrate interactions through the presence of fault lines generating a stripe structure in the molecular film.     

Development and validation of methods for the trace determination of phthalates in sludge and vegetables

A routine method which is simple, quick and precise has been set up and validated for phthalate analysis in environmental samples (tomato plants and sewage sludges). Six phthalates have been studied simultaneously: dimethylphthalate, diethylphthalate, di-n-butylphthalate, n-butylbenzylphthalate, di-2-ethyl-hexyl phthalate (DEHP) and di-n-octylphthalate. Optimization of sample, solvent extraction uses a Soxtec apparatus and extract purification with an a solid-phase extraction cartridge allows between 90 and 110% recovery of phthalates. Precise, sensitive and selective identification and quantifying of analytes is by GC-MS in the single ion monitoring mode. This protocol allows analytes with concentrations as low as 10 microg/kg dry matter (DM) to be determined from small (1-2 g DM) samples. This analytical method has been applied to the phthalate transfer study for agricultural recycling of sludges, where phthalate bioavailability has been studied in aquiculture using two types of experiments. Tomatoes have been grown in containers where the trace organics have been directly introduced as pure substances, and in a second experiment under the same growth conditions, sewage sludge has replaced the pure substances. Transfer of these trace organics has been followed into the various parts of the tomato plant and in general only the DEHP is worthy of note although its percentage transfer remains very low even in an experiment designed to maximize this.     

The Au(n) cluster probe in secondary ion mass spectrometry: influence of the projectile size and energy on the desorption/ionization rate from biomolecular solids

A Au-Si liquid metal ion source which produces Au(n) clusters over a large range of sizes was used to study the dependence of both the molecular ion desorption yield and the damage cross-section on the size (n = 1 to 400) and on the kinetic energy (E = 10 to 500 keV) of the clusters used to bombard bioorganic surfaces. Three pure peptides with molecular masses between 750 and 1200 Da were used without matrix. [M+H](+) and [M+cation](+) ion emission yields were enhanced by as much as three orders of magnitude when bombarding with Au(400) (4+) instead of monatomic Au(+), yet very little damage was induced in the samples. A 100-fold increase in the molecular ion yield was observed when the incident energy of Au(9) (+) was varied from 10 to 180 keV. Values of emission yields and damage cross-sections are presented as a function of cluster size and energy. The possibility to adjust both cluster size and energy, depending on the application, makes the analysis of biomolecules by secondary ion mass spectrometry an extremely powerful and flexible technique, particularly when combined with orthogonal time-of-flight mass spectrometry that then allows fast measurements using small primary ion beam currents.     

Non-Traditional Squares of Predication and Quantification

Three logical squares of predication or quantification, which one can even extend to logical hexagons, will be presented and analyzed. All three squares are based on ideas of the non-traditional theory of predication developed by Sinowjew and Wessel. The authors also designed a non-traditional theory of quantification. It will be shown that this theory is superfluous, since it is based on an obscure difference between two kinds of quantification and one pays a high price for differentiating in this way: losing the definability between the existence- and all-quantifier. Therefore, a combination of non-traditional predication and classical quantification is preferred here.      

On the independence complex of square grids

The enumeration of independent sets of regular graphs is of interest in statistical mechanics, as it corresponds to the solution of hard-particle models. In 2004, it was conjectured by Fendley et al., that for some rectangular grids, with toric boundary conditions, the alternating number of independent sets is extremely simple. More precisely, under a coprimality condition on the sides of the rectangle, the number of independent sets of even and odd cardinality always differ by 1. In physics terms, this means looking at the hard-particle model on these grids at activity −1. This conjecture was recently proved by Jonsson. Here we produce other families of grid graphs, with open or cylindric boundary conditions, for which similar properties hold without any size restriction: the number of independent sets of even and odd cardinality always differ by 0, ±1, or, in the cylindric case, by some power of 2. We show that these results reflect a stronger property of the independence complexes of our graphs. We determine the homotopy type of these complexes using Forman’s discrete Morse theory. We find that these complexes are either contractible, or homotopic to a sphere, or, in the cylindric case, to a wedge of spheres. Finally, we use our enumerative results to determine the spectra of certain transfer matrices describing the hard-particle model on our graphs at activity −1. These results parallel certain conjectures of Fendley et al., proved by Jonsson in the toric case.     

Robust energy planning in buildings with energy and comfort costs

Energy management in buildings is addressed in this paper. The energetic impact of buildings in the current energetic context is first depicted. Then the studied optimization problem is defined as the optimal management of production and consumption activities in houses. A scheduling problem is identified to adjust the energy consumption to both the energy cost and the inhabitant’s comfort. The available flexibilities of the services provided by domestic appliances are used to compute optimal energy plans. These flexibilities are associated to time windows or heating storage abilities. A constraints formulation of the energy allocation problem is given. A derived mixed linear program is used to solve this problem. The energy consumption in houses is very dependent to uncertain data such as weather forecasts and inhabitants’ activities. Parametric uncertainties are introduced in the home energy management problem in order to provide robust energy allocation. Robust linear programming is implemented. Event related uncertainties are also addressed through stochastic programming in order to take into account the inhabitant’s activities. A scenario based approach is implemented to face this robust optimization problem.