Metabolic infrastructure of pregnant women with methylenetetrahydrofolate reductase polymorphisms: A metabolomic analysis

The aim of this study was to demonstrate the altered metabolic infrastructure of pregnant women with methylenetetrahydrofolate reductase (MTHFR) polymorphisms at first trimester and during delivery. Eight singleton pregnant women with MTHFR polymorphisms were compared with 10 normal pregnant women. Maternal blood samples were obtained twice during their pregnancy period (between the 11th and 14th gestational weeks and during delivery). Metabolomic analysis was performed using GC–MS. The GC–MS based metabolomic profile helped identify 95 metabolites in the plasma samples. In the MTHFR group, the levels of 1-monohexadecanoylglycerol, pyrophosphate, benzoin, and linoleic acid significantly decreased (P ˂ 0.05 for all), whereas the levels of glyceric acid, l -tryptophan, l -alanine, l -proline, norvaline, l -threonine, and myo-inositol significantly increased (P ˂ 0.01 for the first two metabolites, P ˂ 0.05 for the others) at 11–14 gestational weeks. Conversely, the levels of benzoin, 1-monohexadecanoylglycerol, pyruvic acid, l -proline, phosphoric acid, epsilon-caprolactam, and pipecolic acid significantly decreased in the MTHFR group, whereas metabolites such as hexadecanoic acid and 2-hydroxybutyric acid increased significantly in the study group during delivery. An impaired energy metabolism pathway, vitamin B complex disorders, tendency for metabolic acidosis (oxidative stress), and the need for cell/tissue support seem prevalent in pregnancies with MTHFR polymorphisms.     

Optimization of a validated stability‐indicating RP‐LC method for the determination of fulvestrant from polymeric based nanoparticle systems,drugs and biological samples

Fulvestrant is used for the treatment of hormone receptor‐positive metastatic breast cancer in postmenopausal women with disease progression following anti‐estrogen therapy. Several reversed‐phase columns with variable silica materials, diameters, lengths, etc., were tested for the optimization study. A good chromatographic separation was achieved using a Waters X‐Terra RP₁₈ column (250 × 4.6 mm i.d. × 5 µm) and a mobile phase, consisting of a mixture of acetonitrile–water (65:35; v/v) containing phosphoric acid (0.1%). The separation was carried out 40°C with detection at 215 nm.The calibration curves were linear over the concentration range between 1.0–300 and 1.0–200 µg/mL for standard solutions and biological media, respectively. The proposed method is accurate and reproducible. Forced degradation studies were also realized. This fully validated method allows the direct determination of fulvestrant in dosage form and biological samples. The average recovery of the added fulvestrant amount in the samples was between 98.22 and104.03%. The proposed method was also applied for the determination of fulvestrant from the polymeric‐based nanoparticle systems. No interference from using polymers and other excipients was observed in in vitro drug release studies. Therefore an incorporation efficiency of fulvestrant‐loaded nanoparticle could be determined accurately and specifically. Copyright © 2014 John Wiley & Sons, Ltd.     

Enhanced Light‐Harvesting Capacity by Micellar Assembly of Free Accessory Chromophores and LH1‐like Antennas

Biohybrid light‐harvesting antennas are an emerging platform technology with versatile tailorability for solar‐energy conversion. These systems combine the proven peptide scaffold unit utilized for light harvesting by purple photosynthetic bacteria with attached synthetic chromophores to extend solar coverage beyond that of the natural systems. Herein, synthetic unattached chromophores are employed that partition into the organized milieu (e.g. detergent micelles) that house the LH1‐like biohybrid architectures. The synthetic chromophores include a hydrophobic boron‐dipyrrin dye (A1) and an amphiphilic bacteriochlorin (A2), which transfer energy with reasonable efficiency to the bacteriochlorophyll acceptor array (B875) of the LH1‐like cyclic oligomers. The energy‐transfer efficiencies are markedly increased upon covalent attachment of a bacteriochlorin (B1 or B2) to the peptide scaffold, where the latter likely acts as an energy‐transfer relay site for the (potentially diffusing) free chromophores. The efficiencies are consistent with a Förster (through‐space) mechanism for energy transfer. The overall energy‐transfer efficiency from the free chromophores via the relay to the target site can approach those obtained previously by relay‐assisted energy transfer from chromophores attached at distant sites on the peptides. Thus, the use of free accessory chromophores affords a simple design to enhance the overall light‐harvesting capacity of biohybrid LH1‐like architectures.     

Electrochemical Fabrication of Prussian Blue Nanocube‐decorated Electroreduced Graphene Oxide for Amperometric Sensing of NADH

In this study, Prussian blue (PB) film on the electroreduced graphene oxide (ERGO)‐modified Au electrode surface (ERGO/PB) is easily prepared by means of cyclic voltammetric technique in the mixture of K₃Fe(CN)₆ and FeCl₃. Its electrochemical behaviors for NADH biosensor are studied. The structural and morphological characters of modified electrode material are analyzed with using of XPS, XRD, Raman, EDS, and SEM techniques. ERGO/PB hybrid nanocomposite for NADH biosensor is exhibited to the higher catalytic effect (linear range from 1.0 to 100 μM, detection limit of 0.23 μM at S/N=3) compared to naked Au, ERGO‐modified Au, and PB‐modified Au electrodes. In addition to, ERGO/PB electrode was used to voltammetric and amperometric detection of H₂O₂. ERGO/PB electrodes also showed the same behavior as the NADH sensor. This ERGO/PB‐modified electrode supplied a simple, new, and low‐cost route for amperometric sensing of both NADH and H₂O₂.     

Heteroarm H‐shaped terpolymers through click reaction

Heteroarm H‐shaped terpolymers, (polystyrene)(poly(methyl methacrylate))‐ poly(tert‐butyl acrylate)‐(polystyrene)(poly(methyl methacrylate)), (PS)(PMMA)‐PtBA‐(PMMA)(PS), and, (PS)(PMMA)‐poly(ethylene glycol)(PEG)‐(PMMA)(PS), through click reaction strategy between PS‐PMMA copolymer (as side chains) with an alkyne functional group at the junction point and diazide end‐functionalized PtBA or PEG (as a main chain). PS‐PMMA with alkyne functional group was prepared by sequential living radical polymerizations such as the nitroxide mediated (NMP) and the metal mediated‐living radical polymerization (ATRP) routes. The obtained H‐shaped polymers were characterized by using ¹H‐NMR, GPC, DSC, and AFM measurements. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1055–1065, 2007     

Chiral Steroidal Phosphines: Synthesis and Platinum Complexes

 The synthesis of novel 3- and 17-diphenylphosphino-androstane derivatives via homogeneous catalytic P-C coupling is described. The products were characterized by ¹H and ³¹P NMR measurements. According to the NMR investigation of the PtCl₂P₂-type complexes, the steroidal phosphines are trans-coordinated with respect to the Pt-centre exclusively.     

Synthesis, structure, and reactivity of fluorous phosphorus/carbon/phosphorus pincer ligands and metal complexes

Reactions of the diphosphine 1,3-C6H4(CH2PH2)2 and fluorous alkenes H2C=CHR(fn)(R(fn)=(CF2)(n-1)CF3; n = 6, 8) at 75 degrees C in the presence of AIBN give the title ligands 1,3-C6H4(CH2P(CH2CH2R(fn))2)2(3-R(fn)) and byproducts 1,3-C6H4(CH3)(CH2P(CH2CH2R(fn))2)(4-R(fn)) in 1 : 3 to 1 : 5 ratios. Workups give -R(fn) in 4--17% yields. Similar results are obtained photochemically. Reaction of 1,3-C6H4(CH2Br)2 and HP(CH2CH2R(f8))2 (5) at 80 degrees C (neat, 1 : 2 mol ratio) gives instead of simple substitution the metacyclophane [1,3-C6H4(CH2P(CH2CH2R(f8))2 CH2-1,3-C(6)H(4)CH(2)P[lower bond 1 end](CH2CH2R(f8))2C[upper bond 1 end]H2](2+)2Br-, which upon treatment with LiAlH(4) yields 3-R(f8)(20%), 4-R(f8), and other products. Efforts to better access 3-R(f8), either by altering stoichiometry or using various combinations of the phosphine borane (H3B)PH(CH2CH2R(f8))2 and base, are unsuccessful. Reactions of 3-R(fn) with Pd(O2CCF3)2 and [IrCl(COE)2]2(COE=cyclooctene) give the palladium and iridium pincer complexes (2,6,1-C6H3(CH2 P(CH2CH2R(fn))(2)(2)Pd(O2CCF3)(10-R(fn); 80-90%) and (2,6,1-C6H3(CH2P(CH2CH2R(f8))2)2)Ir(Cl)(H)(11-R(f8); 29%), which exhibit CF3C6F(11)/toluene partition coefficients of >96 : <4. The crystal structure of 10-R(f8) shows CH2CH2R(f8) groups with all-anti conformations that extend in parallel above and below the palladium square plane to create fluorous lattice domains. NMR monitoring shows a precursor to 11-R(f8) that is believed to be a COE adduct.     

Synthesis and antimicrobial activities of some sulphur containing chromene derivatives

A series of 3,3-dimethyl-3Hbenzothieno[3,2-f][1]-benzopyran analogues modified at the pyran 1,2-double bond were synthesized. The corresponding dihydro and (+/-)-cis-diol derivatives were converted into diacetate and cyclic carbonate upon acylation. The title compounds were characterized by spectroscopic analysis and screened for their antimicrobial activity in vitro.     

On stabilization of Ek chains

We study special subgroups of infinite groups that generalize double centralizers. We analyze sufficient conditions for descending chains of such subgroups to stop after finitely many steps. We discuss whether this phenomenon can happen in the class of groups satisfying chain condition on centralizers.