q变形三参数公式对偶偶核基带的描述

利用q变形三参数公式,计算了锕系和稀土偶偶核基带转动谱,详细分析了拟合参数值呈现出的规律性.结果表明,q变形转动惯量转子模型能够较精确地描述偶偶核基带转动谱.     

Studies on the electrochemiluminescent behavior of luminol on indium tin oxide (ITO) glass

The electrochemiluminescence (ECL) of luminol on indium tin oxide (ITO) glass was high even under a low potential around 0.4-0.5 V, which was quite different from other electrodes such as platinum. ITO nanoparticles were synthesized and used in the research on ITO glass in the ECL process. A static interaction between ITO and luminol is confirmed from UV-vis and fluorescence spectra. Then the ECL enhancement can be supposed to originate from the adsorption of luminol on ITO, which facilitated luminol’s oxidization to the excited state, giving out ECL. On the other hand, ITO can catalyze the generation of reactive oxygen species (ROSs), similar to some other nanomaterials, which also favored the ECL enhancement of luminol.     

基于飞秒激光写制波导的PPKTP晶体倍频实验研究

在PPKTP晶体上进行了飞秒激光刻写波导的实验研究,优化了c-切PPKTP晶体中写制二型波导的工艺参数.当波导长度为10mm,宽度为14.5μm,准相位匹配波长为1064nm时,实现了单模传输.利用该波导对调QNd:YAG激光进行了准相位匹配倍频实验,实现的二次谐波转换效率为39.8%.     

Optimization of microcrystalline silicon thin film solar cell isolation processing parameters using ultraviolet laser

This study used ultraviolet laser to perform the microcrystalline silicon thin film solar cell isolation scribing process, and applied the Taguchi method and an L₁₈ orthogonal array to plan the experiment. The isolation scribing materials included ZnO:Al, AZO transparent conductive film with a thickness of 200 nm, microcrystalline silicon thin film at 38% crystallinity and of thickness of 500 nm, and the aluminum back contact layer with a thickness of 300 nm. The main objective was to ensure the success of isolation scribing. After laser scribing isolation, using the minimum scribing line width, the flattest trough bottom, and the minimum processing edge surface bumps as the quality characteristics, this study performed main effect analysis and applied the ANOVA (analysis of variance) theory of the Taguchi method to identify the single quality optimal parameter. It then employed the hierarchical structure of the AHP (analytic hierarchy process) theory to establish the positive contrast matrix. After consistency verification, global weight calculation, and priority sequencing, the optimal multi-attribute parameters were obtained. Finally, the experimental results were verified by a Taguchi confirmation experiment and confidence interval calculation. The minimum scribing line width of AZO (200 nm) was 45.6 μm, the minimum scribing line width of the microcrystalline silicon (at 38% crystallinity) was 50.63 μm and the minimum line width of the aluminum thin film (300 nm) was 30.96 μm. The confirmation experiment results were within the 95% confidence interval, verifying that using ultraviolet laser in the isolation scribing process for microcrystalline silicon thin film solar cell has high reproducibility.     

Controlling the Trajectory of Swallowtail Gaussian Beams in Dynamic Parabolic Potentials

The propagation dynamics of finite-energy Swallowtail beams in a dynamic parabolic potential, including uniformly moving, accelerating, and oscillating potentials, are investigated. The strong influence of dynamic potentials on the propagation trajectory of Swallowtail beams is demonstrated and various effective manipulations of the beams, including trajectory control, are validated. The intensity and the focal position can also be affected. In addition, the extension to 2D scenarios is also presented. The results theoretically provide more diverse manipulation possibilities for Swallowtail beams, and thus may broaden their potential applications in trajectory and particle manipulation.     

Efficient Green Procedure for the Synthesis of Coumarin Derivatives by a One‐Pot,Three‐Component Reaction under Solvent‐Free Conditions

A simple, efficient, and general method has been developed for the synthesis of coumarin derivatives through a one‐pot reaction of aromatic aldehydes, 2,2‐dimethyl‐1,3‐dioxane‐4,6‐dione and 5,5‐dimethyl‐1,3‐cyclohexanedione, in the presence of TEBA under solvent‐free conditions using grinding methods. The mild reaction conditions, simple protocol, high yields, and cleaner reaction make this protocol practical and economically attractive.     

The Shackling Effect in Cyclic Azobenzene Liquid Crystal

We demonstrate here a novel method for the design of liquid crystals (LCs) via the cyclization of mesogens by flexible chains. For two azobenzene-4,4′-dicarboxylate derivatives, the cyclic dimer, cyclic bis(tetraethylene glycol azobenzene-4,4′-dicarboxylate) (CBTAD), shows LC properties with smectic A phase, while its linear counterpart, bis(2-(2′-hydroxyethyloxy)ethyl azobenzene-4,4′-dicarboxylate (BHAD), has no LC phase. The difference is ascribed to the shackling effect from the cyclic topology, which leads to the much smaller entropy change during phase transitions and increases the isotropic temperature greatly for cyclics. In addition, the trans-to-cis isomerization of azobenzene groups under UV-light is also limited in CBTAD. With the reversible isomerization of azobenzene groups, CBTAD showed interesting isothermal phase transition behaviors, where the LC phase disappeared upon photoirradiation of 365 nm UV-light, and recovered when the UV-light was off. Combined with the smectic LC nature, a novel UV-light tuned visible light regulator was designed, by simply placing CBTAD in two glass plates. The scattered phase of smectic LC was utilized as the “OFF” state for light passage, while the UV-light induced isotropic phase was utilized as the “ON” state. The shackling effect outlined here should be applicable for the design of cyclic LC oligomers/polymers with special properties.

     

Stabilization of continuum generation from normally dispersive nonlinear optical fibers for a tunable broad bandwidth source for optical coherence tomography

Continuum generation from normally dispersive ultrahigh-numerical-aperture fibers deteriorates in relatively short times, limiting its application as a practical optical source for high-resolution optical coherence tomography. We find that reversible light-induced structural modification of fiber optic materials, rather than permanent optical damage, is responsible for this deterioration. By examining how the optical properties of corresponding light-induced waveguides depend on pumping wavelength, we isolate a waveguide that is beneficial for stable continuum generation. The performance deterioration due to the formation of other waveguides can be reversed by overwriting them with this particular waveguide.     

Crystallization Mechanism of 9,9-Diphenyl-dibenzosilole from Solids

Organic semiconductor (OSC) crystals have great potential to be applied in many fields, as they can be flexibly designed according to the demands and show an outstanding device performance. However, OSCs with the capacity of solid-state crystallization (SSC) are developing too slowly to meet demands in productions and applications, due to their difficulties in molecular design and synthesis, unclear mechanism and high dependence on experimental conditions. In this work, in order to solve the problems, we synthesized an organic semiconductor capable of SSC at room temperature by adjusting the relationship between conjugated groups and functional groups. The thermodynamic and kinetic properties have been studied to discover the model of film SSC. Moreover, it can be purposefully controlled to prepare the high-quality crystals, and their corresponding organic electronic devices were further fabricated and discussed.     

Design,Synthesis, and Structure–Activity Relationship Study of Potent MAPK11 Inhibitors

Huntington’s disease (HD) is a rare single-gene neurodegenerative disease, which can only be treated symptomatically. Currently, there are no approved drugs for HD on the market. Studies have found that MAPK11 can serve as a potential therapeutic target for HD. Regrettably, no MAPK11 small molecule inhibitors have been approved at present. This paper presents three series of compounds that were designed and synthesized based on the structure of skepinone-L, a known MAPK14 inhibitor. Among the synthesized compounds, 13a and 13b, with IC₅₀ values of 6.40 nM and 4.20 nM, respectively, displayed the best inhibitory activities against MAPK11. Furthermore, the structure–activity relationship (SAR) is discussed in detail, which is constructive in optimizing the MAPK11 inhibitors for better activity and effect against HD.