Revisiting the Polymerization of Diphenylacetylenes with Tungsten(VI) Chloride and Tetraphenyltin: An Alternative Mechanism by a Metathesis Catalytic System

An alternative reaction mechanism of the polymerization of diphenylacetylelnes using a catalytic system composed of tungsten(VI) chloride and tetraphenyltin has been proposed through the optimization of reaction conditions and investigation of the effect of the electronic nature of diphenylacetylene monomers on the polymerizability. The detailed structures of the polymers have been suggested by mass spectrometric analysis of the obtained polymers and oligomers, which suggested that a phenyl group of tetraphenyltin has been introduced to an initiating end of the polymer chain. Mass spectrometric analysis also provided information about the termination processes of the polymerization. The experimental results strongly suggested that the polymerization of diphenylacetylenes using tungsten(VI) chloride and tetraphenyltin proceeds through a migratory insertion mechanism rather than the long‐accepted metathesis mechanism.     

Changes of electrochemical responses of the bulk solution species by thermotropic permeability of liquid crystalline membranes coated on electrodes

Liquid crystalline/polymer composite membrane-coated electrodes were prepared by casting a 1,2-dichloroethane solution of N-(4-ethoxybenzylidene)-4′-n-butylaniline (EBBA) and polycarbonate (PC) on an electrode surface. The temperature-dependence of the permeability of the EBBA/PC composite membrane on electrodes to Fe(CN)^3?₆ ion as a solution-phase redox ion was investigated by means of hydrodynamic voltammetry at a rotating disk electrode. The permeability changed with temperature over the range of the crystalline-nematic-phase transition temperature of EBBA. It is demonstrated that the observed temperature-dependence of the permeability reflects the thermotropic properties of EBBA in the EBBA/PC composite membrane. Furthermore, the dependence of the limiting current of the steady-state current-potential curves for the reduction of Fe(CN)^—₆ at the EBBA/PC composite membrane-coated electrode upon the membrane thickness, the blend ratio of EBBA and PC and the concentration of Fe(CN)^3?₆ in a bulk solution was examined in order to understand the transport process of Fe(CN)^?3₆ through the EBBA/PC composite membrane from the membrane/solution interface to the electrode/membrane interface. The transport process of Fe(CN)^3?₆ within the membrane was found to obey Fick's Law.     

Comprehensive two-dimensional high-performance liquid chromatography for the separation of polycyclic aromatic hydrocarbons

A comprehensive two-dimensional HPLC system for the separation of polycyclic aromatic hydrocarbons was developed using a pentabromobenzyl column as the first dimension and two short monolithic C18 columns as the second dimension. The primary column and two secondary columns were coupled by a 10-port 2-position valve. The effluent from the first dimension was repetitively injected into the second dimension every 12 s. Due to its resolution, this technique is a powerful tool for the separation of polycyclic aromatic hydrocarbons in a complex matrix such as environmental samples.     

Asymmetric synthesis of bicyclo[n.1.0]alkanes by the enantioselective 1,3-CH insertion reaction of chiral magnesium carbenoids

Treatment of enantiomerically pure 1-chlorovinyl p-tolyl sulfoxides, derived from cyclic ketones and (R)-chloromethyl p-tolyl sulfoxide, with the lithium enolate of tert-butyl carboxylates gave adducts in quantitative yields as single diastereomers. The adducts were treated with i-PrMgCl in toluene to afford optically active bicyclo[n.1.0]alkanes bearing a tert-butyl carboxylate moiety in up to 99% enantiomeric excess through the enantioselective 1,3-CH insertion reaction of the generated chiral magnesium carbenoids. This is the first example of the enantioselective 1,3-CH insertion reaction of magnesium carbenoid.     

Synthesis and light‐emitting properties of carbazole‐based copolymers bearing cyano‐substituted arylenevinylene chromophore

Two arylenevinylene compounds bearing the cyano group at α‐position ( 6 ) and β‐position ( 9 ) from the dialkoxylphenylene unit were synthesized, in which the molecular termini were functionalized with 3‐bromocarbazole. The Suzuki coupling copolymerization of these compounds with 1,4‐bis[(3′‐bromocarbazole‐9′‐yl)methylene]‐2,5‐didecyloxybenzene and 9,9‐dihexylfluorene‐2,7‐bis(boronic acid) was carried out to obtain copolymers ( cp67 and cp97 ) containing the cyano‐substituted arylenevinylene fluorophore of 7 mol %. Model compounds ( 6 ′ and 9 ′) corresponding to the arylenevinylene fluorophore were also prepared. The UV spectra of copolymers resembled that of homopolymer hp with no arylenevinylene segment in both CHCl₃ solution and thin film. The emission maxima of copolymers in CHCl₃ (394 nm) agreed with that of homopolymer indicating that the emission bands originated from the carbazole‐fluorene‐carbazole segment. The emission maximum wavelength of copolymer cp67 in thin film (477 nm) indicated fluorescence from the cyano‐substituted arylenevinylene fluorophore because of the occurrence of fluorescence resonance electron transfer. In contrast, copolymer cp97 showed fluorescence at 528 nm to suggest the formation of a new emissive species such as a charge‐transfer complex (exciplex). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 91–98, 2010     

Determination of kynurenic acid levels in rat brain microdialysis samples and changes in kynurenic acid levels induced by N‐acetylaspartic acid

The levels of kynurenic acid, an endogenous antagonist of α₇ nicotinic acetylcholine and N‐methyl‐D ‐aspartate receptors, were measured in microdialysis samples obtained from the prefrontal cortices of rats using column‐switching high‐performance liquid chromatography with fluorescence detection. When the perfusate was constantly infused at a rate of 1.0 μ/min, the in vitro recovery of kynurenic acid through the dialysis membrane was approximately 20.4%, and the precision was within 1.31%. Endogenous kynurenic acid in the microdialysis sample was clearly detected using column‐switching high‐performance liquid chromatography. As an application study, N‐acetyl‐L ‐aspartic acid, an endogenous metabolite and precursor of N‐acetyl‐L ‐aspartyl‐L ‐glutamic acid, which is an agonist of metabotropic glutamate receptors, was infused for 120 min through the microdialysis probe. The kynurenic acid level significantly increased during the infusion of N‐acetyl‐L ‐aspartic acid, suggesting that kynurenic acid might have some association with N‐acetyl‐L ‐aspartic acid in vivo. Copyright © 2009 John Wiley & Sons, Ltd.     

Dynamical structure of peptide molecules: Fourier transform microwave spectroscopy and ab initio calculations of N-methylformamide

Rotational spectra of both trans and cis forms of the N-methylformamide normal as well as deuterated (HCONDCH₃, referred to as N-D) species were observed by Fourier transform microwave spectroscopy in the frequency region from 5 to 118 GHz. Samples were prepared in the form of a beam by a pulsed jet valve maintained at 50 °C and were introduced in a high-vacuum cavity cell, with either Ne or Ar as a carrier gas at a backing pressure of 100 kPa. The observed spectra were analyzed to yield molecular parameters including rotational constants and barrier, V₃, to CH₃ internal-rotation: 53.9 (6) and 301 (4) cm⁻¹ for the trans and cis forms of the normal species, respectively, and 41.9 (6) and 309 (4) cm⁻¹ for the trans and cis forms of the N-D species, respectively. Spectra of four trans isotopologues with ¹³C, ¹⁵N, or ¹⁸O singly-substituted in the internal-rotation A state were observed and analyzed to derive the r_s structure of the trans form. For comparison with the experimental data, ab initio calculations were carried out at MP2/6-31G∗∗ level to derive molecular structure, potential barrier to CH₃ internal rotation, and the energy difference between the cis and trans forms. An extensive coupling was found between the CH₃ internal rotation and N-H out-of-plane bending, suggesting that the potential function for the CH₃ internal-rotation deviates considerably from a simple cos(3α) form. The effects of the V₆ term is briefly discussed.     

Metallic conductivity and ferromagnetic interaction of iron(III) d spins in the needle crystals of (ethylenedithiotetrathiafulvalenoquinone-1,3-dithiolemethide)(2).FeBr(4) salt

The 2:1 charge-transfer (CT) salts (1(2).FeBr(4) and 1(2).GaBr(4)) of ethylenedithiotetrathiafulvalenoquinone-1,3-dithiolemethide (1) with FeBr(4)(-) and GaBr(4)(-) counteranions were obtained as needle crystals, whose structures are almost the same as each other. The 1 molecules form a one dimensionally stacked column with alternation of their molecular axis direction, while the counteranions are aligned in parallel with the 1-stacked columns with the direction of their distorted-tetrahedral geometry maintained. The room-temperature electrical conductivities measured on the single crystals of 1(2).FeBr(4) and 1(2).GaBr(4) were 4.6 and 2.1 S cm(-1), respectively. From the temperature dependences of their electrical conductivities in both cases the electrical conducting properties were metallic between ca. 170 and 300 K, but below ca. 170 K converted to be semiconducting and continued till 5 K, although the activation energies are very small (4-10 meV). For 1(2).FeBr(4) very weak and antiferromagnetic interaction occurred between the d spins of FeBr(4)(-) ions in the temperature range of ca. 1-300 K. However, below ca. 15 K the ferromagnetic interaction was reversely preferential possibly by participation of the pi spin of 1.