Double tracer whole body autoradiography using a short-lived positron emitter and a long-lived beta emitter

We investigated glucose and amino acid metabolism in tumors and other organs using whole body autoradiography with a short-lived positron emitter and a long-lived beta emitter. The radioactive compounds used were 2-deoxy-2-[18F]-fluoro-D-glucose (18F-FDG) with a half life of 109.8 min and L-[methyl-14C]-methionine (14C-MET) with a half life of 5,730 years. A Donryu rat weighing about 150 g was subcutaneously inoculated at the back with experimental tumors of AH109A and AH272. 74 MBq (2 mCi) of 18F-FDG and 740 kBq (20 microCi) of 14C-MET was administered and after 30 min, the rat was sacrificed. Whole body frozen sections were obtained using autocryotome. For the 18F-FDG autoradiogram, the frozen sections were exposed to an X-ray film for 6 h. After seven days, these frozen sections were again exposed to 14C-MET for a week. Cross-contamination was minimized by adjusting the exposure time, the interval of exposures and the administered dose. The accumulation of the tracers was represented as the optical density ratio of the tissue of interest to the muscle. The tumor ratios were 12.5 for 18F-FDG and 8.6 for 14C-MET showing the highest accumulation in the whole body autoradiogram. In contrast the inflammatory tissue ratios were 1.27 for 18F-FDG and 0.77 for 14C-MET showing very low amino acid metabolism. With the present double tracer whole body autoradiogram, 18F-FDG accumulation was seen in the brain and the heart but not to the liver as against 14C-MET accumulation which was seen to the liver but not to the brain and the heart.     

Electrodeposition of manganese and molybdenum mixed oxide thin films and their charge storage properties

Manganese and molybdenum mixed oxides in a thin film form were deposited anodically on a platinum substrate by cycling the electrode potential between 0 and +1.0 V vs Ag/AgCl in aqueous manganese(II) solutions containing molybdate anion (MoO(4)2-). A possible mechanism for the film formation is as follows. First, electrooxidation of Mn2+ ions with H2O yields Mn oxide and protons. Then, the protons being accumulated near the electrode surface react with MoO(4)2- to form polyoxomolybdate through a dehydrated condensation reaction (by protonation and dehydration). The condensed product coprecipitates with the Mn oxide. Cyclic voltammetry of the Mn/Mo oxide film-coated electrode in aqueous 0.5 M Na2SO4 solution exhibited a pseudocapacitive behavior with higher capacitance and better rate capability than that of the pure Mn oxide prepared similarly, most likely as a result of an increase in electrical conductivity of the film. Electrochemical quartz crystal microbalance and X-ray photoelectron spectroscopy clearly demonstrated that the observed pseudocapacitive behavior results from reversible extraction/insertion of hydrated protons to balance the charge upon oxidation/reduction of Mn3+/Mn4+ in the film.     

Mechanism of gold adsorption by persimmon tannin gel.

Gold adsorption by persimmon tannin (PT) gel from a solution containing hydrogen tetrachloroaurate(III) was examined. A flow-rate examination in a column system indicated the reduction of Au(III) ion to Au(0). XRD patterns clarified the existence of Au(0) on the gel which adsorbed gold. The gel could also adsorb colloidal Au(0) prepared independently. A model consisting of ligand exchange, Au(III) reduction to Au(0), and resulting Au(0) adsorption by PT gel was presented for the gold adsorption mechanism.     

Oxysulfide Sm(2)Ti(2)S(2)O(5) as a stable photocatalyst for water oxidation and reduction under visible light irradiation (lambda < or = 650 nm)

A Ti-based oxysulfide, Sm(2)Ti(2)S(2)O(5), was studied as a visible light-driven photocatalyst. Under visible light (440 nm < or = lambda < or = 650 nm) irradiation, Sm(2)Ti(2)S(2)O(5) with a band gap of approximately 2 eV evolved H(2) or O(2) from aqueous solutions containing a sacrificial electron donor (Na(2)S-Na(2)SO(3) or methanol) or acceptor (Ag(+)) without any noticeable degradation. This oxysulfide is, therefore, a stable photocatalyst with strong reduction and oxidation abilities under visible-light irradiation. The electronic band structure of Sm(2)Ti(2)S(2)O(5) was calculated using the plane-wave-based density functional theory (DFT) program. It was elucidated that the S3p orbitals constitute the upper part of the valence band and these orbitals make an essential contribution to the small band gap energy. The conduction and valence bands' positions of Sm(2)Ti(2)S(2)O(5) were also determined by electrochemical measurements. It indicated that conduction and valence bands were found to have satisfactory potentials for the reduction of H(+) to H(2) and the oxidation of H(2)O to O(2) at pH = 8. This is consistent with the results of the photocatalytic reactions.     

Multipoint recognition of catecholamines by hydrindacene-based receptors accompanied by the complexation-induced conformational switching

The molecular recognition of catecholamines by hydrindacene-based receptors 1 and 2, as well as the durene-based receptor 3, and the guest-induced conformational changes are reported. These receptors selectively bind adrenaline and dopamine salts through the guests' ammonium group and 3-hydroxyl group on the aromatic ring. In the case of adrenaline, an additional hydrogen bond with a benzylic hydroxyl group is formed. In 2 % CD3CN/CDCl3, the association constants are of the order of 10(4) M(-1), which is much larger than with guests without the 3-hydroxyl groups (10(3) M(-1)). The two amide groups of receptor 1 can rotate freely around the C(aromatic)--C(amide) bond, whereas the tert-amide in 2 changes between two stable conformations at a slow enough rate to allow detection by (1)H NMR spectroscopy. In the absence of a guest molecule, the syn-conformer is less stable than the anti-conformer. On complex formation with adrenaline, the syn-conformer becomes dominant due to an intramolecular dipole-reversal effect in addition to multipoint hydrogen bonding.     

Pd-catalyzed selective addition of heteroaromatic C-H bonds to C-C triple bonds under mild conditions

Simple heteroarenes such as pyrroles and indoles undergo addition reactions to C-C triple bonds in the presence of a catalytic amount of Pd(OAc)(2) under very mild conditions, affording cis-heteroarylalkenes in most cases. The cleavage of aromatic C-H bonds is the possible rate-determining step in CH(2)Cl(2), and the addition of heteroaromatic C-H bonds to C-C triple bonds is in a trans-fashion.     

Reaction cross sections in the ten-nucleon system

The properties of the 10-nucleon system are investigated with a multiconfiguration resonating-group method, which consists of +⁶Li,d+⁸Be,d+⁸Be^*, and +⁶Li^* cluster configurations, where⁶Li^* and⁸Be^* represent the rotational excited-states of⁶Li and⁸Be with orbital angular momentum equal to 2. The results show that, among reactions initiated from the +⁶Li incident channel, the inelastic-scattering process⁶Li(,)⁶Li^* dominates. The -transfer reactions⁶Li(,d)⁸Be and⁶Li(,d)⁸Be^* have smaller cross sections, but still contribute, on the average, to about one-third of the +⁶Li total reaction cross sections in the centre-of-mass energy region between 12 and 24 MeV. The calculated +⁶Li total reaction cross section at 27 MeV is equal to around 70% of the empirical value obtained by analyzing +⁶Li differential scattering cross-section data. This is a respectable amount, considering the complexity of the problem and that no adjustable parameters are involved in the calculation. Based on the findings of this and previous investigations, some general criteria which govern the importance of cluster-transfer processes in light nuclear systems have also been obtained. These criteria should be very useful in qualitatively understanding the behaviour of other systems that have hitherto not been studied with the multi-configuration resonating-group method.     

Laser-ionization mass-spectrometric studies on laser ablation of a nitrogen-rich polymer at 532 nm and 1064 nm

Laser-ionization Time-Of-Flight (TOF) mass-spectrometric studies have been carried out on the 532 nm and 1064 nm laser ablation products from a nitrogen-rich polymer. The polymer used had an elemental composition of C_6.0N_8.9H_3.4 and consisted of C=N, C-N, and N-H chemical bonds. The TOF mass spectra observed were composed of various peaks (150 amu) depending on the ablation laser wavelength. The primary peaks were assigned to C⁺, CN⁺, CHnN⁺ ₂ (n=1–3) and C₂H₂N⁺ ₃ for 532 nm ablation, and C⁺, C⁺ ₃, HCN⁺, HCCN⁺, CH₂NH⁺, HNCN⁺, H₃NCN⁺, and C₄H₄N⁺ ₇ for 1064 nm ablation. The flight velocity distributions with peak velocities ranging from 8.6×10³ cm/s to 3.8×10⁴ cm/s were measured for these products. The distinct velocity distributions observed between small and large products indicate the presence of two origins in the fragment ejection process from the polymer for both 532 nm and 1064 nm ablation. Furthermore, we suggest an importance of the translational energy of the fragments for the product generation in the laser plume.