The effect of UV irradiation on the reduction of Au(III) ions adsorbed on manganese dioxide.

The effect of UV (ultraviolet) irradiation on the adsorption of Au(III) ions on manganese dioxide and their reduction to Au(0) (gold with 0 valence state) was investigated using XPS (X-ray photoelectron spectroscopy) and 197Au M?ssbauer spectroscopy. The UV irradiation accelerated the adsorption and the reduction. From the fact that the proportion of Au(0) estimated from Au 4f XPS spectra for surface analysis was significantly smaller than that from 197Au M?ssbauer spectra for bulk analysis, we deduced that Au(0) was interpenetrated to the inside of manganese dioxide (into deeper places than about 30 A) where XPS is impossible to detect. The content of surface hydroxyl groups on manganese dioxide also increased due to the UV irradiation. The relationship between the charge in the content of hydroxyl groups and the interpenetration of Au(0) is discussed.     

Oblique-Incidence Characteristics of a Parallel-Aligned Nematic-Liquid-Crystal Spatial Light Modulator

We have developed optically-addressed and electrically-addressed liquid crystal spatial phase-only light modulators having no pixelized structures. We obtained a large depth of phase-only modulation and high diffraction efficiency based on the electro-optical characteristics of a parallel-aligned nematic liquid crystal. These spatial light modulators (SLM) are of the reflection type, so there would be a loss of power in the readout light from the half mirror, which was set up so as to separate the incident and reflected lights. To optimize the characteristics of a reflection type spatial phase-only light modulator, we have proposed an oblique incident optical readout setup. We have examined the effect of conditions such as the polarization direction and the incidence angle of the readout light, and the orientation of liquid crystal molecules in the SLM. High diffraction efficiency close to the theoretical maximum value was obtained by adjusting the above conditions. The simulation analysis can well explain the experimental results of phase modulation.     

Universal generation of higher-order multiringed Laguerre-Gaussian beams by using a spatial light modulator

Laguerre-Gaussian (LG) beams of various higher-order radial modes are generated by using a reflective phase-only liquid crystal on silicon (LCOS) spatial light modulator (SLM). Because of the LCOS SLM's phase-modulation characteristic of a wide spatial bandwidth, a phase modulation scheme effectively generates higher-order LG beams of up to the fifth-order radial mode. We also perform correlation analyses between the observed and the theoretical two-dimensional mode profiles to universally obtain correlation coefficients of more than 0.946, which suggest mode generations of high quality.     

Similar Structural Dynamics for the Degradation of CH3NH3PbI3 in Air and in Vacuum

We investigate the degradation path of MAPbI₃ (MA=methylammonium) films over flat TiO₂ substrates at room temperature by means of X‐ray diffraction, spectroscopic ellipsometry, X‐ray photoelectron spectroscopy, and high‐resolution transmission electron microscopy. The degradation dynamics is found to be similar in air and under vacuum conditions, which leads to the conclusion that the occurrence of intrinsic thermodynamic mechanisms is not necessarily linked to humidity. The process has an early stage, which drives the starting tetragonal lattice in the direction of a cubic atomic arrangement. This early stage is followed by a phase change towards PbI₂. We describe how this degradation product is structurally coupled with the original MAPbI₃ lattice through the orientation of its constituent PbI₆ octahedra. Our results suggest a slight octahedral rearrangement after volatilization of HI+CH₃NH₂ or MAI, with a relatively low energy cost. Our experiments also clarify why reducing the interfaces and internal defects in the perovskite lattice enhances the stability of the material.     

Precise determination of bromine in PP resin pellet by instrumental neutron activation analysis using internal standardization

Instrumental neutron activation analysis with the internal standardization was applied to the precise determination of Br in polypropylene resin of candidate certified reference material. The known amount of ¹⁹⁷Au was used as an internal standard to compensate for neutron flux inhomogeneity, to improve the γ ray measurement uncertainty and the linearity of the calibration curves. The reliability of the proposed method validated using analytical results of BCR-681. The analytical result of Br in the sample was consistent with that obtained by ID-ICPMS. The relative expanded uncertainty (k = 2) was 1.5 %, and it was equivalent to that of ID-ICPMS.     

High‐performance liquid chromatography separation of unsaturated organic compounds by a monolithic silica column embedded with silver nanoparticles

The optimization of a porous structure to ensure good separation performances is always a significant issue in high‐performance liquid chromatography column design. Recently we reported the homogeneous embedment of Ag nanoparticles in periodic mesoporous silica monolith and the application of such Ag nanoparticles embedded silica monolith for the high‐performance liquid chromatography separation of polyaromatic hydrocarbons. However, the separation performance remains to be improved and the retention mechanism as compared with the Ag ion high‐performance liquid chromatography technique still needs to be clarified. In this research, Ag nanoparticles were introduced into a macro/mesoporous silica monolith with optimized pore parameters for high‐performance liquid chromatography separations. Baseline separation of benzene, naphthalene, anthracene, and pyrene was achieved with the theoretical plate number for analyte naphthalene as 36 000 m^?1. Its separation function was further extended to cis/trans isomers of aromatic compounds where cis/trans stilbenes were chosen as a benchmark. Good separation of cis/trans‐stilbene with separation factor as 7 and theoretical plate number as 76 000 m^?1 for cis‐stilbene was obtained. The trans isomer, however, is retained more strongly, which contradicts the long‐ established retention rule of Ag ion chromatography. Such behavior of Ag nanoparticles embedded in a silica column can be attributed to the differences in the molecular geometric configuration of cis/trans stilbenes.     

Necessary conditions for shear thickening in associating polymer networks

We study shear-thickening phenomena observed in thermoreversible gels of telechelic associating polymers on the basis of the transient network theory. We introduce nonlinear models for the elongational properties of the middle chain; the tension along middle chains contains a nonlinear term with an amplitude A that diverges if the chain is fully stretched. Models for the dissociation rate of end chains from network junctions are also introduced; the dissociation rate is coupled to the middle-chain tension by a coupling constant g. The balance between the nonlinearity strength and coupling intensity determines the necessary condition for thickening. A strong nonlinearity in the tension caused by a large A leads to thickening if the dissociation rate of the end chains is weakly coupled to the middle-chain tension. In contrast, if it is strongly coupled, the end chains easily dissociate upon a small nonlinear elongation of the middle chains, thus leading to thinning. We present theoretical phase diagrams showing the boundary of the thickening/thinning transition in the A–g plane, and we show the existence of a critical point for thickening in these diagrams.     

Enantioselective synthesis of chelidonine, a B/C-cis-11-hydroxyhexahydrobenzo[c]phenanthridine alkaloid

Both enantiomers of chelidonine, a B/C-cis-11-hydroxyhexahydrobenzo[c]phenanthridine alkaloid, were synthesized by manipulation of the B/C-dehydro ring juncture of benzo[c]phenanthridine skeleton using Sharpless asymmetric dihydroxylation and stereospecific catalytic hydrogenation after introduction of oxygen functions on the C ring as key reaction steps for the construction of stereogenic centers.     

Quantum yields and quantitative spectra of firefly bioluminescence with various bivalent metal ions

We measured quantitative spectra of firefly (Photinus pyralis) bioluminescence in the presence of Zn²⁺ and other bivalent metal ions to investigate the effects of these metal ions on luciferin‐luciferase reaction. We studied the dependence of the quantum yield and spectrum on quantity and kind of bivalent metal ions. Adding various amounts of Mg²⁺, Mn²⁺ and Ca²⁺ produced virtually no change in the quantum yields or the spectra of bioluminescence. In contrast, increasing amounts of ions such as Zn²⁺ and Cd²⁺ decreased quantum yields and changed the bioluminescence color from yellow‐green to red. Quantitative analysis showed that the sensitivities of the quantum yield and color to various metal ions were in the order of Hg²⁺>Zn²⁺, Cd²⁺>Ni²⁺, Co²⁺, Fe²⁺≫Mg²⁺, Mn²⁺, Ca²⁺. We propose that the changes in quantum yield and spectrum caused by the metal ions are due to their effect on luciferase that surrounds oxyluciferin during its radioactive decay. We also found that having more metal ions accelerated bioluminescence reactions. The sensitivity of the reaction rate had no correlation with those of the quantum yield and spectrum.     

Sesquarterpenes (C35 terpenes) biosynthesized via the cyclization of a linear C35 isoprenoid by a tetraprenyl-β-curcumene synthase and a tetraprenyl-β-curcumene cyclase: identification of a new terpene cyclase

In this study, mono- and pentacyclic C(35) terpenes from Bacillus subtilis were biosynthesized via the cyclization of C(35) isoprenoid using purified enzymes, including the first identified new terpene cyclase that shows no sequence homology to any of the known terpene cyclases. On the basis of these findings, we propose that these C(35) terpenes should be called the new family of "sesquarterpenes."