Uniaxial alignment of the smallest diamagnetic susceptibility axis using time-dependent magnetic fields

A diamagnetic particle with magnetic susceptibilities chi3 < chi2 = chi1 < 0 was subjected to a rotating magnetic field to obtain an alignment of the chi3 axis (the smallest susceptibility axis) in the direction perpendicular to the plane of the rotating magnetic field. A polymer short fiber, whose fiber axis coincides with the chi3 axis, was suspended in a fluid with the same density, and then a rotating magnetic field generated by a rotation of a pair of permanent magnets was applied. The fiber axis, rotating following the applied field, finally ended up with an alignment perpendicular to the plane of the rotating magnetic field. The experimental data on the time course of the alignment was in good agreement with the numerical calculation based on the equation of rotation.     

Theoretical study of photochemical reactions: Electron assignment and the state correlation diagram

A general way for drawing the state correlation diagram and seeking the reaction path is presented. If a high-symmetry reacting system is given, its least-motion path that maintains the symmetry is primarily examined. For a given state, it is judged whether the least-motion path is symmetry allowed or forbidden. If allowed, it is called the direct process. If forbidden, the symmetry imposed on the system should be relaxed, resulting in the mixing of MO 's. Then, the energy barrier of the avoided crossing for some excited states is removed and the possible reaction path is found. After this procedure, the symmetry-allowed paths may be sought by the geometry optimization with a suitable wave function. By the use of such a procedure, the dissociation of diazomethane and (3H-)diazirine is found to proceed via the C_s and C₂ symmetries.     

Mixed-valence state of optically active 1',1'"-bis(2-phenylbutyl)-1,1''-biferrocenium pentaiodide: effects of cation symmetry and intermolecular interaction on trapped-/detrapped-valence states

The effects of cation symmetry and packing on the mixed-valence state of binuclear ferrocene derivatives are discussed separately by using chiral isomers and racemic modification of 1',1' "-bis(2-phenylbutyl)-1,1' '-biferrocenium pentaiodide. The pentaiodide anion has a polymeric structure and is composed of triiodide anion and iodine molecule units. The (R,S) isomer having an inversion center shows a detrapped-valence state even at 78 K. On the other hand, the (R,R) and the (S,S) isomers having no inversion center show a trapped-valence state at room temperature. The racemic modification, however, consisting of the (R,R) and the (S,S) isomers shows a perfect detrapped-valence state at room temperature. This finding shows that the packing effect overcomes the effect of cation asymmetry.     

Copolymerization of 2-methylene-4-phenyl-1,3-dioxolane with electrophilic vinyl monomers through zwitterionic mechanism

Spontaneous copolymerization of cyclic ketene acetal, 2-methylene-4-phenyl-1,3-dioxolane ( I ) with common electrophilic vinyl monomers, such as methyl α-cyanoacrylate (MCA), acrylonitrile (AN), and methyl methacrylate (MMA) were investigated to further explore zwitterion polymerization method with cyclic ketene acetals. In the reaction of I with MCA and AN, spontaneous copolymerization took place at ambient temperature. The copolymers of I with MCA gave low molecular weight polymers, but copolymers obtained with I and AN were high molecular weight polymers. In the reaction of I and MMA, high molecular weight copolymer was obtained only at temperatures above 80°C. Thus, obtained polymers were not the alternating copolymers and possessed high I content in all the cases. From the above results, macrozwitterionic mechanism was suggested as discussed.     

Cationic polymerization of formaldehyde in liquid carbon dioxide. Part II: A kinetic study of the polymerization

The kinetic behavior on the polymerization of formaldehyde with and without acidic catalyst, in liquid carbon dioxide, in the temperature range of 30 to 50°C. was investigated. In the polymerization without catalyst both the polymer yield and the degree of polymerization increased with reaction time and also with rising temperature. With acidic catalyst, such as acetic acid and dichloroacetic acid, both the polymer yield and the degree of polymerization increased more than that in the polymerization without catalyst. The overall rate of polymerization with and without acidic catalyst was expressed by the first-order rate equation with respect to monomer concentration. From the results it was concluded that the polymerizations belonged to a type of successive polymerization with rapid initiation and no termination. The rate constant and the activation energy of each elementary process of polymerization were estimated on the basis of the results.     

Uptake of alkali and alkaline earth metal ions into electrochemically pretreated glassy carbon fibres by flow-through electrolysis

When glassy carbon fibres are used, alkali and alkaline earth metal ions are adsorbed in the micropores which are created or activated by oxidative treatment of the fibres. The average pore radius was estimated to be 2 nm by nitrogen adsorption experiments. Uptake was studied with a flow system consisting of a flow-through carbon-fibre electrode; a dropping mercury electrode at the end of the flow line monitored changes in the metal ion concentrations. The ions were taken up at negative potentials and released at positive potentials. The amount taken up increased in the sequence Na⁺ < Li⁺ < H⁺, suggesting that the ions were desolvated before entering the pore system.     

Electron microscope observation of lattice defects in the FeCr σ-phase

The lattice image of the FeCr σ-phase was observed by high-resolution electron microscopy with the c axis of the tetragonal cell parallel to the incident beam. It was found that bright dots of the observed image correspond to the positions of atoms in the $\text{z = ±}\text{1}\text{4}$ planes of the σ-phase structure. Sequence faults were found in the irregular part of the lattice image. The analysis of the faults shows that an extra plane of $\text{1}\text{2}\text{a}{}_0$ width is inserted into the regular structure and one side of the fault is slightly shifted parallel to the fault plane with respect to the other side, which is consistent with the model proposed by Frank and Kasper. A unit cell step of the sequence faults was found and a model of the step was proposed.     

Effect of TRX-liposomes size on their prolonged circulation in rats

Newly formulated cationic liposomes (TRX-liposomes) with four different mean diameters were injected into twelve male rats via the lateral tail vein in order to evaluate the effect of liposomal size on pharmacokinetic parameters. TRX-liposomes disappeared from the blood according to the one-compartment model and demonstrated maximum and minimum half-lives of ca. 14 h (mean diameter of 114.3 nm) and ca. 5 h (mean diameter of 285.9 nm), respectively. This prolonged half-life tended to decrease at the boundary of 114.3 nm mean diameter. The optimal size (114.3 nm) for prolonged circulation of TRX-liposomes was consistent with that of pegylated liposomes such as Doxil((R)), however, the half-life was different among these liposomes. The electric charge of the TRX-liposomal surface is assumed to be responsible for this difference. The results of the present study will be very useful in the design of long-circulating cationic liposomes.     

Preparation of crystalline polyamides by the alternating copolymerization of aziridines and cyclic imides

The copolymerization of aziridines and cyclic imides was studied. Aziridines copolymerized alternately with cyclic imides to give crystalline polyamides. Ethylenimine and succinimide copolymerized to nylon 2,4, melting near 300°C., without any catalyst. Similarly, the corresponding crystalline polyamides were obtained from the systems of 1,2-propylenimine–succinimide, ethylenimine–glutarimide, and ethylenimine–phthalimide. The copolymerization of aziridines and cyclic imides in the presence of BF₃OEt₂ gave a copolymer which was rich in aziridine units, whereas, the addition of triethylamine had no influence on the copolymer composition. A mechanism of copolymerization was proposed based on the facts that N-tetramethylenesuccinamide was obtained by the reaction of pyrrolidine and succinimide, N-acetylethylenimine reacted with acetamide to yield N,N′-diacetylethylenediamine and that the rate of this copolymerization was dependent on the electrophilicity of imide.     

Ring transformation of 6H-cyclopropa[e]pyrazolo[1,5-a]pyrimidine. IV (1). Reduction and reaction of 5a-acetyl-6a-ethoxycarbonyl-5a,6a-dihydro-6H-cyclopropa[e]pyrazolo[1,5-a]pyrimidine-3-carbonitriles with primary amines

The reaction of 5a-acetyl-6-ethoxycarbonyl-5a,6a-dihydro-6H-cyclopropa[e]pyrazolo[1,5-a]pyrimidine-3-carbonitrile ( 1a ) with benzylamine gave ethyl l-benzyl-5-cyano-8a,9-dihydro-2-methyl-1H-pyrrolo[3,4-e]-pyrazolo[1,5-a]pyrimidine-8a-carboxylate ( 2a ), in addition to 5-acetyl-3-benzylamino-1-(4-cyanopyrazol-3-yl)- 2-pyridone ( 3 ). Reaction of 1a with aniline gave ethyl 6-acetyl-8-anilino-3-cyano-7,8-dihydro-4H-pyrazolo-[1,5-a][1,3]diazepine-8-carboxylate ( 4 ), in addition to ethyl 3-cyano-7-methyl-6-pyrazolo[1,5-a]pyrimidine-acrylate ( 5 ). On the other hand, the same reactions of 1b with benzylamine or aniline gave 2b or 8b , respectively. Though catalytic hydrogenation of 1a over 5% palladium-carbon proceeded by ring fission of cyclopropane ring to give 9 , 1a (or 1b ) afforded 4,5-dihydro derivatives ( 13 or 15 ) by catalytic hydrogenation over platinum oxide. The reactivity of 5-methoxy-4,5,5a,6a-tetrahydro-6H-cyclopropa[e]pyrazolo[1,5-a]pyrimidine ( 16 ), which are related analogs of 1a,b , is also described.