Preparation of monodisperse crosslinked polymelamine microcapsules by phase separation method

Monodisperse polymelamine microcapsules were prepared by phase separation method. Control of microcapsule diameter was investigated using the uniform-sized oil-in-water emulsion droplets as the capsule core. The monodisperse emulsion droplets were prepared using the Shirasu porous glass (SPG) membrane emulsification technique. The effects of the diameter of the oil droplet and concentration of sodium dodecyl sulfate (SDS), which is a typical emulsifier in SPG membrane emulsification, on microencapsulation were investigated. The microcapsules were aggregated when oil droplets with small size were microencapsulated at high SDS concentration. To reduce the SDS concentration, the creamed emulsion was used. The monodisperse polymelamine microcapsules were successfully prepared by using the creamed emulsion. The microcapsule diameter was almost similar to the diameter of the encapsulated oil droplet. The coefficient of variation values was about 10% for all microcapsules prepared in this study. Control of microcapsule diameter was achieved in the range of 5–60 μm.     

Controlled growth for synthesizing a compact mordenite membrane

Controlling the growth of zeolite crystals on a porous alumina support is essential for preparing a compact zeolite membarne. First, mordenite seed crystals applied on a nonporous -alumina disk were grown and morphological change of mordenite crystals were observed in the course of growth. Then, mordenite membranes were synthesized on a porous -alumina tube under the same conditions employed in the study using the alumina disks. We found that seed crystal growth was widely controllable by changing water content in reaction solution, which resulted in better control of the morphology of mordenite crystals for synthesizing a thin compact mordenite membrane. Separation properties for mordenite membranes were studied in water–hydrogen binary system at 473 K with 10 kPa of water partial pressure, where no capillary condensation was expected in non-zeolitic pores. Separation factor for a mordenite membrane with a few defects was poor; however, a defect-free mordenite membrane prepared under a suitable condition highly separated steam from hydrogen.     

Development of catalyst‐transfer condensation polymerization. Synthesis of π‐conjugated polymers with controlled molecular weight and low polydispersity

We describe the development of chain‐growth condensation polymerization for the synthesis of well‐defined π‐conjugated polymers via a new polymerization mechanism, catalyst‐transfer polymerization. We first studied the condensation polymerization of Grignard‐type hexylthiophene monomer with a Ni catalyst as a part of our research on chain‐growth condensation polymerization, and found that this polymerization also proceeded in a chain‐growth polymerization manner. However, the polymerization mechanism involving the Ni catalyst was different from that of previous chain‐growth condensation polymerizations based on substituent effects; the Ni catalyst catalyzed the coupling reaction of the monomer with the polymer, followed by the transfer of Ni(0) to the terminal C? Br bond of the elongated molecule. This catalyst‐transfer condensation polymerization is generally applicable for the synthesis of polythiophene with an etheric side chain and poly(p‐pheneylene), as well as for the synthesis of polyfluorene via the Pd‐catalyzed Suzuki–Miyaura coupling reaction. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 753–765, 2008     

Construction of aryliridium-salen complexes: enantio- and cis-selective cyclopropanation of conjugated and nonconjugated olefins

Two stable and optically active iridium-salen complexes were synthesized by introducing a tolyl or phenyl ligand at the apical position, respectively, via the S(E)Ar mechanism, and they were found to be efficient catalysts for cis-selective asymmetric cyclopropanation. The scope of the cyclopropanation was wide, and the reactions of not only conjugated mono-, di-, and trisubstituted olefins but also nonconjugated terminal olefins proceeded with high enantio- and cis-selectivity, even in the presence of a functional group such as an ether or ester. The utility of this cyclopropanation was demonstrated by a short step synthesis of 8-[(1R,2S)-2-hexylcyclopropyl]octanoate, isolated from Escherichia coli B-ATCC 11303, using the reaction as the key step.     

Development of Donor-π-Acceptor-Type Fluorinated Tolanes as Compact Condensed Phase Luminophores and Applications in Photoluminescent Liquid-Crystalline Molecules

Fluorinated tolanes, produced by introducing fluorine atoms into one of the aromatic rings of tolane, emitted almost no fluorescence in a solution state, but the fluorescence intensity increased dramatically in the crystalline state because of intermolecular H⋅⋅⋅F hydrogen bonds. The photoluminescent (PL) colors depend on the molecular orbitals, dipole moments, and molecular aggregated structures can be varied by controlling terminal substituents along the major molecular axis. The introduction of a long alkoxy or semifluoroalkoxy unit as a flexible chain into the terminal positions along the major molecular axis induced the formation of a liquid-crystalline (LC) phase; fluorinated tolanes act both as luminophores and as mesogens, leading to the molecular design of new photoluminescent LC molecules (PLLCs). The results also indicated that a fluorinated tolane dimer, which consists of two fluorinated tolanes linked by a flexible alkylene spacer, also becomes a novel PLLC.     

Annulation of Alkynyl Aryl Ethers with Allyl Pivalates To Give 2,3‐Bismethylenechromanes through Double C−H Bond Cleavage

The treatment of silylethynyloxyarenes with allylic pivalates in the presence of a palladium catalyst led to efficient C?H bond cleavage in both substrates and a novel annulation reaction to give 2,3‐bismethylenechromanes. When ortho‐allylated silylethynyloxybenzenes were used as the substrates, the same products were obtained. This result shows that site‐selective intramolecular hydrovinylation is involved in the annulation reaction. The synthetic utility of the products was demonstrated by the construction of condensed polycycles.     

Fructose/dioxygen biofuel cell based on direct electron transfer-type bioelectrocatalysis

One-compartment biofuel cells without separators have been constructed, in which d-fructose dehydrogenase (FDH) from Gluconobacter sp. and laccase from Trametes sp. (TsLAC) work as catalysts of direct electron transfer (DET)-type bioelectrocatalysis in the two-electron oxidation of d-fructose and four-electron reduction of dioxygen as fuels, respectively. FDH adsorbs strongly and stably on Ketjen black (KB) particles that have been modified on carbon papers (CP) and produces the catalytic current with the maximum density of about 4 mA cm(-2) without mediators at pH 5. The catalytic wave of the d-fructose oxidation is controlled by the enzyme kinetics. The location and the shape of the catalytic waves suggest strongly that the electron is directly transferred to the KB particles from the heme c site in FDH, of which the formal potential has been determined to be 39 mV vs. Ag|AgCl|sat. KCl. Electrochemistry of three kinds of multi-copper oxidases has also been investigated and TsLAC has been selected as the best one of the DET-type bioelectrocatalyst for the four-electron reduction of dioxygen in view of the thermodynamics and kinetics at pH 5. In the DET-type bioelectrocatalysis, the electron from electrodes seems to be transferred to the type I copper site of multi-copper oxidases. TsLAC adsorbed on carbon aerogel (CG) particles with an average pore size of 22 nm, that have been modified on CP electrodes, produces the catalytic reduction current of dioxygen with a density of about 4 mA cm(-2), which is governed by the mass transfer of the dissolved dioxygen. The FDH-adsorbed KB-modified CP electrodes and the TsLAC-adsorbed CG-modified CP electrodes have been combined to construct one-compartment biofuel cells without separators. The open-circuit voltage was 790 mV. The maximum current density of 2.8 mA cm(-2) and the maximum power density of 850 microW cm(-2) have been achieved at 410 mV of the cell voltage under stirring.     

Synthesis of 6-formylpterin nucleoside analogs and their ROS generation activities in the presence of NADH in the dark

We demonstrated previously that 3-position-modified 6-formylpterin (6FP) derivatives produce reactive oxygen species (ROS) such as hydrogen peroxide (H(2)O(2)) from oxygen in the presence of NADH in the dark. It has been shown that 6FP derivatives markedly generate ROS, which gives rise to their particular physiological activities, such as induction of apoptosis in cellular and living systems, suggesting that such compounds provide a hint for the design of a ROS controlling agent in vivo. However, it is not well understood why such unique activities appear on chemical modification. In the present study, in order to see the effect on ROS generation activity in the dark by the modification of the 1-position in 6FP, we have developed a new synthetic procedure for nucleoside analogs of 6FP and prepared 1-(beta-d-ribofuranosyl)-2-(N,N-diethylaminomethyleneamino)-6-formylpteridin-4-one (RDEF) and 1-(beta-d-ribofuranosyl)-2-(piperidine-1-ylmethyleneamino)-6-formylpteridin-4-one (RPIF) in which the 1-position of 6FP is glycosylated. At pH 7.4, NADH was spontaneously oxidized to NAD(+) in the presence of RDEF in the dark. Using electron paramagnetic resonance analysis coupled with the spin trapping technique, we show that O(2) was converted to H(2)O(2)via superoxide anion radical ( O(2)(-)) during this reaction. The modification of the 1-position of 6FP did not cancel ROS generation activities, which were demonstrated in 3-position-modified 6FPs. Since the 6FP derivatives developed in the present study have a ribose moiety, these compounds can be subjected to further derivatization, such as incorporation into oligonucleotides, oligosaccharides, proteins, or any other compounds that recognize and interact with specific biomolecules, and therefore would be useful in pharmaceutical investigations that need generation of appropriate and controllable amounts of ROS in vivo.